SAPFP51T SAP ABAP dialog Program - documentation and ABAP source code

Text Symbol: PQN = Deduction from date is after deduction to date
Text Symbol: PQO = Customizing errors
Text Symbol: PQM = Valid from date is after valid to date
Text Symbol: PQL = Transfer time
Text Symbol: PQP = Error when setting up personal work schedule
Text Symbol: PQQ = Reduction
Text Symbol: PQR = Maximum exceeded
Text Symbol: PQS = Display of capping differences
Text Symbol: PQT = Condition for degree of challenge
Text Symbol: PQK = Deduction interval
Text Symbol: PQJ = Validity interval
Text Symbol: PQI = Accrual period
Text Symbol: PQH = Reduction rule
Text Symbol: PQG = Rounding rule
Text Symbol: PQF = Replace
Text Symbol: PQE = Increase
Text Symbol: PQD = Operation ID
Text Symbol: PQC = Maximum entitlement
Text Symbol: PQB = generated
Text Symbol: PQU = Condition for challenge group
Text Symbol: PQV = Valid from date is after valid to date
Text Symbol: PQW = Start of deduction after end of deduction
Text Symbol: PQX = Collision between quota corrections of the same quota type
Text Symbol: PQY = Quota type: &1 Employee is not active in validity period
Text Symbol: PQZ = Quota type: &1 Employee is not active in deduction period
Text Symbol: PR1 = Time evaluation log for personnel number:
Text Symbol: PR2 = Name:
Text Symbol: PR3 = Period :
Text Symbol: PR4 = Short log for time evaluation
Text Symbol: PR5 = Personnel no.:
Text Symbol: PRO = Your chosen test procedure does not exist
Text Symbol: R01 = Error in indexed perform. Function that is not implemented was called.
Text Symbol: R02 = Invalid operation $ in line:
Text Symbol: R04 = Invalid print request
Text Symbol: R05 = Continuation rule $ missing
Text Symbol: R06 = Invalid parameter setting for operation $ in line:
Text Symbol: R07 = Division by zero - personnel number $ not evaluated
Text Symbol: R11 = No work center data on $

Text Symbol: P92 = Only count in interval
Text Symbol: P94 = Fix.value
Text Symbol: P95 = Conditional exit
Text Symbol: P96 = Day grouping
Text Symbol: P97 = Time pairs processed
Text Symbol: P98 = Generation time for T510S rule:
Text Symbol: P99 = Relevant processing types
Text Symbol: P9A = Unconditional exit
Text Symbol: P9B = From
Text Symbol: P9C = To
Text Symbol: P9D = Number
Text Symbol: P9E = Time condition not met
Text Symbol: P9F = Minimum not reached
Text Symbol: P9G = Maximum reached
Text Symbol: P9H = No pairs exist for processing type
Text Symbol: P9I = No pairs to be processed
Text Symbol: P9J = Absence not valuated using "as if" principle
Text Symbol: P9K = AB split
Text Symbol: P9M = No time WT selection for following pairs:
Text Symbol: P9N = Time wage type selection field not set in
Text Symbol: P9O = Absence Valuation table (T554C)
Text Symbol: P9Q = Exit rule
Text Symbol: P9R = Exit time WT sel.
Text Symbol: P9W = General information
Text Symbol: P9X = Selected
Text Symbol: P9Z = Time WT selection rule group
Text Symbol: PP9 = Condition acc. to country enhancement
Text Symbol: PQ0 = General information
Text Symbol: PQ1 = Quota type selection rule group
Text Symbol: PQ2 = Rule: &1 quota type &2 &3
Text Symbol: PQ3 = Applicability of rule
Text Symbol: PQ4 = Condition set for hiring date
Text Symbol: PQ5 = Fulfilled
Text Symbol: PQ6 = Not fulfilled
Text Symbol: PQ7 = Condition acc. to SAP enhancement
Text Symbol: PQ8 = Earliest accrual point
Text Symbol: PQ9 = Error in calculating seniority
Text Symbol: PQA = Generation data
Text Symbol: T06 = Rule contains times and there are pairs without times



Text Symbol: T07 = Pair w/o clock times:
Text Symbol: T08 = Hours
Text Symbol: TA1 = TIP
Text Symbol: TA2 = ZML
Text Symbol: TA3 = TZP
Text Symbol: TZL = Date Start End Wage type I AL C1 AB Number
Text Symbol: U01 = |From To |Number |Origin |DWS/proc. type/time type |
Text Symbol: UTI = Unchecked time infotype records exist
Text Symbol: VS1 = Date Variable key Number
Text Symbol: VS2 = Variable key Number
Text Symbol: WWK = Not a work week in infotype 0007 for employee
Text Symbol: Z10 = Overtime incorrect at
Text Symbol: Z11 = Planned work incorrect at
Text Symbol: Z46 = Infotype 0050 was not read
Text Symbol: Z47 = No data for time recording (infotype 0050) on key date
Text Symbol: ZA1 = EE not active between:
Text Symbol: ZA2 = EE not active on day:
Text Symbol: ZA9 = Error during DWS generation: Breaks incompatible
Text Symbol: ZAD = Error when reading leave data
Text Symbol: ZAE = Invalid parameter setting for operation $
Text Symbol: ZB3 = Technical error no.
Text Symbol: ZB4 = No daily work schedule provided for
Text Symbol: ZB5 = Error entry no.
Text Symbol: ZB6 = Processing terminated for EE
Text Symbol: ZB7 = Incorrect processing for EE
Text Symbol: ZB8 = Note no.
Text Symbol: ZB9 = Message issued for EE
Text Symbol: ZES = Time type Number
Text Symbol: ZI1 = Number From To P TC Ct Vt TTy P O V1 V2 RB
Text Symbol: ZI2 = Number From To 1 P BR ER BPin EPin BTer ETer O Pt A
Text Symbol: ZI3 = Number From To Pt Al C1 AB PR KT
Text Symbol: ZIP = From To 1 P ID Ct P TTy BR ER C O I BPin EPin PT AL C1 AB Number
Text Symbol: ZML = Start End Wage type Vers1 I AL C1 AB Number
Text Symbol: ZMS = Time type Number
Text Symbol: ZPT = Day ITer OTer S1 S2 Pt ClIn ClOut Rec. SkelTime Flex Core Overtime
Text Symbol: ZSK = Valid from - to Time transfer spec. Number ATime
Text Symbol: ZTP = Time Code Block Dur.of paid break Dur.of unpaid break
Text Symbol: R19 = STOP: No refinement of variable key for rule $
Text Symbol: R20 = STOP: No change of PCR / ESG for PCR for rule $


Text Symbol: R21 = STOP: No rule under key $
Text Symbol: R22 = STOP: Invalid rule type for $
Text Symbol: R23 = STOP: PZYKL exceeds level 3 for $
Text Symbol: R25 = Invalid sort request:
Text Symbol: R26 = Table
Text Symbol: R27 = Sort criterion
Text Symbol: R64 = Operation $: Field $ too long, maximum of 8 significant characters
Text Symbol: R65 = Incorrect parameter offset/length for operation $ in line $
Text Symbol: R66 = Operation $ not allowed for function $:
Text Symbol: R70 = Assignment to current number-of-hours field not possible (see docu)
Text Symbol: R71 = Function $ not allowed for entries without clock times
Text Symbol: R80 = Symbolic condition $ unknown
Text Symbol: R81 = Operation SCOND was not used in PCR $
Text Symbol: R82 = Function CHECK BP required for operation
Text Symbol: R83 = Operation ADDZL not in table T52AO
Text Symbol: R84 = ALP split indicator already filled before function $
Text Symbol: R85 = C1 split indicator already filled before function $
Text Symbol: R86 = Operation $ used in wrong schema block:
Text Symbol: R87 = Payroll area does not exist (infotype I0001)
Text Symbol: R88 = Leave entitlement > 999.99
Text Symbol: R89 = No automatic change in leave entitlement acc. to T533
Text Symbol: R90 = String KNTAG only possible for periods with maximum 31 days
Text Symbol: R91 = Operation $ not allowed for TIP entries without clock times
Text Symbol: RB1 = Operation RJCT is used in PC rule $
Text Symbol: RB2 = Operation RJCT should not be used (see documentation)
Text Symbol: RB3 = PC rule $ has a formal error (see CHECK in PE02)
Text Symbol: REC = Recalc. as of
Text Symbol: RET = Start date $ of overtime correction is before the earliest recalculation date
Text Symbol: RUL = Several GOTC calls in one rule
Text Symbol: RVA = Error in decision rule: Variable key becomes too long
Text Symbol: SET = Start date of overtime correction was set to $
Text Symbol: T01 = Wage type generation requested for period:
Text Symbol: T02 = Fr.:
Text Symbol: T03 = To :
Text Symbol: T04 = Time evaluation run up to:
Text Symbol: T05 = Cannot be used:
Text Symbol: B12 = Lines in new block:
Text Symbol: B13 = Personnel no. / date:
Text Symbol: B14 = The following T510S blocks are in the index:
Text Symbol: B15 = T510S buffer index at end of payroll
Text Symbol: B16 = When loading a T510S block, you must archive:
Text Symbol: B17 = Problem with
Text Symbol: B18 = Following blocks will be archived :
Text Symbol: B19 = Orgmo Daymo To From Lines Access Loaded A
Text Symbol: B21 = The new block exceeds the OCCURS parameter
Text Symbol: B23 = No rules for specified T510S key
Text Symbol: BIS = To
Text Symbol: C11 = Entries in table C1
Text Symbol: C12 = Assign.to cost accounting no.
Text Symbol: COR = Correct overtime from
Text Symbol: DAY = Day to be evaluated:
Text Symbol: DO1 = Easter date cannot be calculated for year:
Text Symbol: DO2 = Error in function DODMO
Text Symbol: DW0 = Equivalent DWS:
Text Symbol: DW1 = DWS
Text Symbol: DW2 = Variant
Text Symbol: DW4 = Dynamic DWS assignment
Text Symbol: DW5 = No dynamic DWS assignment
Text Symbol: DW6 = There is a substitution
Text Symbol: DW7 = There are invalid pairs in TIP
Text Symbol: DW8 = No relevant pairs in TIP
Text Symbol: DW9 = Original DWS is optimum
Text Symbol: DWA = Original DWS retained
Text Symbol: DWB = Dynamic DWS assignment not possible
Text Symbol: DWC = Assigned daily WS:
Text Symbol: E50 = Function MOD only allowed in INIT block
Text Symbol: E53 = Error converting WBS element
Text Symbol: E54 = Cannot determine controlling area
Text Symbol: ERR = does not exist
Text Symbol: F01 = Incorrect parameter setting $ for parameter 2 of function $
Text Symbol: F03 = Error during pair formation on day:
Text Symbol: F05 = Error while unlocking cluster B1
Text Symbol: F06 = Error while unlocking PERNR
Text Symbol: F07 = Error while importing schemas $
Text Symbol: 001 = Process time transfer specs
Text Symbol: 002 = Person rejected:
Text Symbol: 003 = Operation RNDOT can be called only by function ACTIO
Text Symbol: 004 = Function:
Text Symbol: 005 = Rule:
Text Symbol: 006 = Operation:
Text Symbol: 007 = There is a threshold value for the time type:
Text Symbol: 008 = Post
Text Symbol: 009 = to tm.type
Text Symbol: 010 = to wage type
Text Symbol: 011 = Absence quota
Text Symbol: 012 = to table ZKO
Text Symbol: 013 = Set indicator for core night work
Text Symbol: 014 = Call rule
Text Symbol: 015 = GrRule TType
Text Symbol: 016 = VaKey
Text Symbol: 017 = Operation
Text Symbol: 018 = Incr. by
Text Symbol: 019 = Set to
Text Symbol: AL1 = # From To Start End Number Un
Text Symbol: AL2 = ValBa OT Posit Pr PrInd
Text Symbol: AL3 = EP Amount PSGrp PSL
Text Symbol: APZ = # From To EG ES CC PA CoCtr Shift CUL JobNo Act. CostD TRec
Text Symbol: AQ0 = Attendance quota & cannot be deducted by time evaluation
Text Symbol: AQ1 = Absence quota & cannot be accrued by time evaluation
Text Symbol: ASS = Func. Par1 Par2 Par3 Par4 L E Text
Text Symbol: AUT = No read authorization for IT 0130
Text Symbol: B01 = Check your buffer tuning for T510S
Text Symbol: B02 = You need to load the following block:
Text Symbol: B03 = The program archives entire buffer at this point
Text Symbol: B04 = Check the following tuning parameters:
Text Symbol: B05 = CGrp.:
Text Symbol: B06 = Buffer handler:
Text Symbol: B07 = OCCURS parameter for SAPFP51T / BUF-510S :
Text Symbol: B08 = OrgMo:
Text Symbol: B09 = DayMo:
Text Symbol: B10 = From:
Text Symbol: B11 = To:
Text Symbol: LMP = No time evaluation period found for subsequent date
Text Symbol: LMR = No period &1 for date &2
Text Symbol: LMS = Period &1 not found
Text Symbol: O01 = No active plan version set in T77S0
Text Symbol: O02 = No entry in T7PBS_SP_TSN_D for Key:
Text Symbol: O03 = The assigned organizational unit is
Text Symbol: P12 = No entry in table $ for key $ at $
Text Symbol: P13 = No entry in table $ for key $
Text Symbol: P30 = Rule
Text Symbol: P33 = Function
Text Symbol: P51 = Conditions/day
Text Symbol: P52 = Act
Text Symbol: P53 = Average working hours per day
Text Symbol: P54 = Planned hours
Text Symbol: P55 = for 100% empl%
Text Symbol: P56 = Generated wage type: No.
Text Symbol: P57 = Hrs.
Text Symbol: P59 = Rule
Text Symbol: P60 = Target
Text Symbol: P61 = Processing type
Text Symbol: P62 = Weekday
Text Symbol: P63 = Hl. PrevDay (Cl./Per.)
Text Symbol: P64 = Hl. Curr.day (Cl./Per.)
Text Symbol: P65 = Hl. Next day (Cl./Per.)
Text Symbol: P69 = Period WS class
Text Symbol: P70 = Daily WS class
Text Symbol: P71 = Day type
Text Symbol: P72 = Calculation of number of hours
Text Symbol: P73 = Time
Text Symbol: P74 = End time
Text Symbol: P75 = Minimum
Text Symbol: P76 = Maximum
Text Symbol: P78 = Generated wage type
Text Symbol: P79 = Wage type
Text Symbol: P80 = Multiplier
Text Symbol: P84 = Condition met
Text Symbol: P85 = Condition not met
Text Symbol: P91 = Conditions/time
Text Symbol: F08 = No account assignment for:
Text Symbol: F09 = Schema does not process time recording ID
Text Symbol: F10 = No time recording for employee on
Text Symbol: F11 = Call the schema editor to analyze errors
Text Symbol: F12 = Check the syntax of the incorrect schema
Text Symbol: F15 = No read authorization for PS/PT cluster
Text Symbol: F16 = No write authorization for cluster PS/PT
Text Symbol: HRS = Error in importing time type
Text Symbol: K00 = Error when determining core night work hours indicator (function KNTAG)
Text Symbol: K01 = Check the payroll periods (T549Q) for PERMO $ / key date $:
Text Symbol: K02 = Period $ $ $ in T549Q comprises more than 100 days
Text Symbol: KNB = Indicators determined so far:
Text Symbol: KNT = Indicators on current day:
Text Symbol: KNZ = ....x....1....x....2....x....3.
Text Symbol: LIM = Func.LIMIT
Text Symbol: LM0 = Difference entered with sign &1 in time type &2
Text Symbol: LM1 = No grouping, MODIF L, set
Text Symbol: LM2 = MODIF L:
Text Symbol: LM3 = No entries found in table T559P
Text Symbol: LM4 = Age limit does not apply
Text Symbol: LM6 = Not in final processing
Text Symbol: LM7 = Comparison made
Text Symbol: LM8 = Invalid comparison for final processing
Text Symbol: LM9 = Not in day processing
Text Symbol: LMA = Check point not reached
Text Symbol: LMB = Comparison value entered in time type
Text Symbol: LMC = Invalid unit
Text Symbol: LMD = Comparison value from time type
Text Symbol: LME = Comparison value cumulated in time type
Text Symbol: LMF = Upper limit:
Text Symbol: LMG = Value limit exceeded by &
Text Symbol: LMH = Capping performed
Text Symbol: LMI = Difference entered with sign &1 in time type &2
Text Symbol: LMJ = Difference entered with sign &1 in wage type &2
Text Symbol: LMK = Comparison value within specified tolerance for threshold value
Text Symbol: LML = Comparison value outside of specified tolerance for threshold value
Text Symbol: LMM = Lower limit:
Text Symbol: LMN = Invalid comparison for day processing