SAP Function Modules
RECN_SCS_WRITE_DOCUMENT SAP Function module - CHDO RECN_SCS => Gen. by RSSCD000
RECN_SCS_WRITE_DOCUMENT is a standard SAP function module available within R/3 SAP systems depending on your version and release level. Below is the pattern details for this FM showing its interface including any import and export parameters, exceptions etc as well as any documentation contributions (Comments) specific to the object.
See here to view full function module documentation and code listing, simply by entering the name RECN_SCS_WRITE_DOCUMENT into the relevant SAP transaction such as SE37 or SE80.
Associated Function Group:
RECNSCS_CD
Released Date:
Not Released
Processing type: Start of update delayed (Start Delayed)
Pattern for FM RECN_SCS_WRITE_DOCUMENT - RECN SCS WRITE DOCUMENT
CALL FUNCTION 'RECN_SCS_WRITE_DOCUMENT' "CHDO RECN_SCS => Gen. by RSSCD000
EXPORTING
objectid = " cdhdr-objectid
tcode = " cdhdr-tcode
utime = " cdhdr-utime
udate = " cdhdr-udate
username = " cdhdr-username
planned_change_number = SPACE " cdhdr-planchngnr
object_change_indicator = 'U' " cdhdr-change_ind
planned_or_real_changes = SPACE " cdhdr-change_ind
no_change_pointers = SPACE " cdhdr-change_ind
upd_vicnscs = SPACE " cdpos-chngind
upd_vicnscsau = SPACE " cdpos-chngind
upd_vicnscspp = SPACE " cdpos-chngind
upd_vicnscsrh = SPACE " cdpos-chngind
upd_vicnscsrp = SPACE " cdpos-chngind
TABLES
xvicnscs = " avicnscs
yvicnscs = " avicnscs
xvicnscsau = " avicnscsau
yvicnscsau = " avicnscsau
xvicnscspp = " avicnscspp
yvicnscspp = " avicnscspp
xvicnscsrh = " avicnscsrh
yvicnscsrh = " avicnscsrh
xvicnscsrp = " avicnscsrp
yvicnscsrp = " avicnscsrp
. " RECN_SCS_WRITE_DOCUMENT
ABAP code example for Function Module RECN_SCS_WRITE_DOCUMENT
The ABAP code below is a full code listing to execute function module RECN_SCS_WRITE_DOCUMENT including all data declarations. The code uses the latest in-line data DECLARATION SYNTAX but I have included an ABAP code snippet at the end to show how declarations would look using the original method of declaring data variables up front. This will allow you to compare and fully understand the new inline method. Please note some of the newer syntax such as the @DATA is not available until a later 4.70 service pack (SP8).
| it_xvicnscs | TYPE STANDARD TABLE OF AVICNSCS,"TABLES PARAM |
| wa_xvicnscs | LIKE LINE OF it_xvicnscs , |
| it_yvicnscs | TYPE STANDARD TABLE OF AVICNSCS,"TABLES PARAM |
| wa_yvicnscs | LIKE LINE OF it_yvicnscs , |
| it_xvicnscsau | TYPE STANDARD TABLE OF AVICNSCSAU,"TABLES PARAM |
| wa_xvicnscsau | LIKE LINE OF it_xvicnscsau , |
| it_yvicnscsau | TYPE STANDARD TABLE OF AVICNSCSAU,"TABLES PARAM |
| wa_yvicnscsau | LIKE LINE OF it_yvicnscsau , |
| it_xvicnscspp | TYPE STANDARD TABLE OF AVICNSCSPP,"TABLES PARAM |
| wa_xvicnscspp | LIKE LINE OF it_xvicnscspp , |
| it_yvicnscspp | TYPE STANDARD TABLE OF AVICNSCSPP,"TABLES PARAM |
| wa_yvicnscspp | LIKE LINE OF it_yvicnscspp , |
| it_xvicnscsrh | TYPE STANDARD TABLE OF AVICNSCSRH,"TABLES PARAM |
| wa_xvicnscsrh | LIKE LINE OF it_xvicnscsrh , |
| it_yvicnscsrh | TYPE STANDARD TABLE OF AVICNSCSRH,"TABLES PARAM |
| wa_yvicnscsrh | LIKE LINE OF it_yvicnscsrh , |
| it_xvicnscsrp | TYPE STANDARD TABLE OF AVICNSCSRP,"TABLES PARAM |
| wa_xvicnscsrp | LIKE LINE OF it_xvicnscsrp , |
| it_yvicnscsrp | TYPE STANDARD TABLE OF AVICNSCSRP,"TABLES PARAM |
| wa_yvicnscsrp | LIKE LINE OF it_yvicnscsrp . |
SELECT single OBJECTID
FROM CDHDR
INTO @DATA(ld_objectid).
SELECT single TCODE
FROM CDHDR
INTO @DATA(ld_tcode).
SELECT single UTIME
FROM CDHDR
INTO @DATA(ld_utime).
SELECT single UDATE
FROM CDHDR
INTO @DATA(ld_udate).
SELECT single USERNAME
FROM CDHDR
INTO @DATA(ld_username).
SELECT single PLANCHNGNR
FROM CDHDR
INTO @DATA(ld_planned_change_number).
SELECT single CHANGE_IND
FROM CDHDR
INTO @DATA(ld_object_change_indicator).
SELECT single CHANGE_IND
FROM CDHDR
INTO @DATA(ld_planned_or_real_changes).
SELECT single CHANGE_IND
FROM CDHDR
INTO @DATA(ld_no_change_pointers).
SELECT single CHNGIND
FROM CDPOS
INTO @DATA(ld_upd_vicnscs).
SELECT single CHNGIND
FROM CDPOS
INTO @DATA(ld_upd_vicnscsau).
SELECT single CHNGIND
FROM CDPOS
INTO @DATA(ld_upd_vicnscspp).
SELECT single CHNGIND
FROM CDPOS
INTO @DATA(ld_upd_vicnscsrh).
SELECT single CHNGIND
FROM CDPOS
INTO @DATA(ld_upd_vicnscsrp).
"populate fields of struture and append to itab
append wa_xvicnscs to it_xvicnscs.
"populate fields of struture and append to itab
append wa_yvicnscs to it_yvicnscs.
"populate fields of struture and append to itab
append wa_xvicnscsau to it_xvicnscsau.
"populate fields of struture and append to itab
append wa_yvicnscsau to it_yvicnscsau.
"populate fields of struture and append to itab
append wa_xvicnscspp to it_xvicnscspp.
"populate fields of struture and append to itab
append wa_yvicnscspp to it_yvicnscspp.
"populate fields of struture and append to itab
append wa_xvicnscsrh to it_xvicnscsrh.
"populate fields of struture and append to itab
append wa_yvicnscsrh to it_yvicnscsrh.
"populate fields of struture and append to itab
append wa_xvicnscsrp to it_xvicnscsrp.
"populate fields of struture and append to itab
append wa_yvicnscsrp to it_yvicnscsrp. . CALL FUNCTION 'RECN_SCS_WRITE_DOCUMENT' EXPORTING objectid = ld_objectid tcode = ld_tcode utime = ld_utime udate = ld_udate username = ld_username planned_change_number = ld_planned_change_number object_change_indicator = ld_object_change_indicator planned_or_real_changes = ld_planned_or_real_changes no_change_pointers = ld_no_change_pointers upd_vicnscs = ld_upd_vicnscs upd_vicnscsau = ld_upd_vicnscsau upd_vicnscspp = ld_upd_vicnscspp upd_vicnscsrh = ld_upd_vicnscsrh upd_vicnscsrp = ld_upd_vicnscsrp TABLES xvicnscs = it_xvicnscs yvicnscs = it_yvicnscs xvicnscsau = it_xvicnscsau yvicnscsau = it_yvicnscsau xvicnscspp = it_xvicnscspp yvicnscspp = it_yvicnscspp xvicnscsrh = it_xvicnscsrh yvicnscsrh = it_yvicnscsrh xvicnscsrp = it_xvicnscsrp yvicnscsrp = it_yvicnscsrp . " RECN_SCS_WRITE_DOCUMENT
IF SY-SUBRC EQ 0. "All OK ENDIF.
ABAP code to compare 7.40 inline data declaration with original syntax
The below ABAP code uses the older none in-line data declarations. This allows you to see the coding differences/benefits of the later inline syntax. It may also be useful if you are using an older version of SAP as some of the newer syntax above, such as the @DATA is not available until 4.70 EHP 8.
DATA:
| ld_objectid | TYPE CDHDR-OBJECTID , |
| it_xvicnscs | TYPE STANDARD TABLE OF AVICNSCS , |
| wa_xvicnscs | LIKE LINE OF it_xvicnscs, |
| ld_tcode | TYPE CDHDR-TCODE , |
| it_yvicnscs | TYPE STANDARD TABLE OF AVICNSCS , |
| wa_yvicnscs | LIKE LINE OF it_yvicnscs, |
| ld_utime | TYPE CDHDR-UTIME , |
| it_xvicnscsau | TYPE STANDARD TABLE OF AVICNSCSAU , |
| wa_xvicnscsau | LIKE LINE OF it_xvicnscsau, |
| ld_udate | TYPE CDHDR-UDATE , |
| it_yvicnscsau | TYPE STANDARD TABLE OF AVICNSCSAU , |
| wa_yvicnscsau | LIKE LINE OF it_yvicnscsau, |
| ld_username | TYPE CDHDR-USERNAME , |
| it_xvicnscspp | TYPE STANDARD TABLE OF AVICNSCSPP , |
| wa_xvicnscspp | LIKE LINE OF it_xvicnscspp, |
| ld_planned_change_number | TYPE CDHDR-PLANCHNGNR , |
| it_yvicnscspp | TYPE STANDARD TABLE OF AVICNSCSPP , |
| wa_yvicnscspp | LIKE LINE OF it_yvicnscspp, |
| ld_object_change_indicator | TYPE CDHDR-CHANGE_IND , |
| it_xvicnscsrh | TYPE STANDARD TABLE OF AVICNSCSRH , |
| wa_xvicnscsrh | LIKE LINE OF it_xvicnscsrh, |
| ld_planned_or_real_changes | TYPE CDHDR-CHANGE_IND , |
| it_yvicnscsrh | TYPE STANDARD TABLE OF AVICNSCSRH , |
| wa_yvicnscsrh | LIKE LINE OF it_yvicnscsrh, |
| ld_no_change_pointers | TYPE CDHDR-CHANGE_IND , |
| it_xvicnscsrp | TYPE STANDARD TABLE OF AVICNSCSRP , |
| wa_xvicnscsrp | LIKE LINE OF it_xvicnscsrp, |
| ld_upd_vicnscs | TYPE CDPOS-CHNGIND , |
| it_yvicnscsrp | TYPE STANDARD TABLE OF AVICNSCSRP , |
| wa_yvicnscsrp | LIKE LINE OF it_yvicnscsrp, |
| ld_upd_vicnscsau | TYPE CDPOS-CHNGIND , |
| ld_upd_vicnscspp | TYPE CDPOS-CHNGIND , |
| ld_upd_vicnscsrh | TYPE CDPOS-CHNGIND , |
| ld_upd_vicnscsrp | TYPE CDPOS-CHNGIND . |
SELECT single OBJECTID
FROM CDHDR
INTO ld_objectid.
"populate fields of struture and append to itab
append wa_xvicnscs to it_xvicnscs.
SELECT single TCODE
FROM CDHDR
INTO ld_tcode.
"populate fields of struture and append to itab
append wa_yvicnscs to it_yvicnscs.
SELECT single UTIME
FROM CDHDR
INTO ld_utime.
"populate fields of struture and append to itab
append wa_xvicnscsau to it_xvicnscsau.
SELECT single UDATE
FROM CDHDR
INTO ld_udate.
"populate fields of struture and append to itab
append wa_yvicnscsau to it_yvicnscsau.
SELECT single USERNAME
FROM CDHDR
INTO ld_username.
"populate fields of struture and append to itab
append wa_xvicnscspp to it_xvicnscspp.
SELECT single PLANCHNGNR
FROM CDHDR
INTO ld_planned_change_number.
"populate fields of struture and append to itab
append wa_yvicnscspp to it_yvicnscspp.
SELECT single CHANGE_IND
FROM CDHDR
INTO ld_object_change_indicator.
"populate fields of struture and append to itab
append wa_xvicnscsrh to it_xvicnscsrh.
SELECT single CHANGE_IND
FROM CDHDR
INTO ld_planned_or_real_changes.
"populate fields of struture and append to itab
append wa_yvicnscsrh to it_yvicnscsrh.
SELECT single CHANGE_IND
FROM CDHDR
INTO ld_no_change_pointers.
"populate fields of struture and append to itab
append wa_xvicnscsrp to it_xvicnscsrp.
SELECT single CHNGIND
FROM CDPOS
INTO ld_upd_vicnscs.
"populate fields of struture and append to itab
append wa_yvicnscsrp to it_yvicnscsrp.
SELECT single CHNGIND
FROM CDPOS
INTO ld_upd_vicnscsau.
SELECT single CHNGIND
FROM CDPOS
INTO ld_upd_vicnscspp.
SELECT single CHNGIND
FROM CDPOS
INTO ld_upd_vicnscsrh.
SELECT single CHNGIND
FROM CDPOS
INTO ld_upd_vicnscsrp.
Contribute (Add Comments)
Please help keep this info upto date and use the comments section below to add useful hints, tips and information specific to this SAP function. This will then be available for you and other users to easily find by simply searching on the object name RECN_SCS_WRITE_DOCUMENT or its description.