SAP Function Modules

comments icon Comments

OIUX3_TX_SOLE_WRITE_DOCUMENT SAP Function module - CHDO OIUX3_TX_SOLE => Gen. by RSSCD000







OIUX3_TX_SOLE_WRITE_DOCUMENT is a standard SAP function module available within R/3 SAP systems depending on your version and release level. Below is the pattern details for this FM showing its interface including any import and export parameters, exceptions etc as well as any documentation contributions (Comments) specific to the object.

See here to view full function module documentation and code listing, simply by entering the name OIUX3_TX_SOLE_WRITE_DOCUMENT into the relevant SAP transaction such as SE37 or SE80.

Associated Function Group: OIUX3_TX_SOLE_CD
Released Date: Not Released
Processing type: Start update immediately (start immed)
update module start immediate settings


Pattern for FM OIUX3_TX_SOLE_WRITE_DOCUMENT - OIUX3 TX SOLE WRITE DOCUMENT 





CALL FUNCTION 'OIUX3_TX_SOLE_WRITE_DOCUMENT' "CHDO OIUX3_TX_SOLE => Gen. by RSSCD000
  EXPORTING
    objectid =                  " cdhdr-objectid
    tcode =                     " cdhdr-tcode
    utime =                     " cdhdr-utime
    udate =                     " cdhdr-udate
    username =                  " cdhdr-username
    planned_change_number = SPACE  " cdhdr-planchngnr
    object_change_indicator = 'U'  " cdhdr-change_ind
    planned_or_real_changes = SPACE  " cdhdr-change_ind
    no_change_pointers = SPACE  " cdhdr-change_ind
    upd_icdtxt_oiux3_tx_sole = SPACE  " cdpos-chngind
    upd_oiux3_tx_soledt = SPACE  " cdpos-chngind
    n_oiux3_tx_solehd =         " oiux3_tx_solehd
    o_oiux3_tx_solehd =         " oiux3_tx_solehd
    upd_oiux3_tx_solehd = SPACE  " cdpos-chngind
  TABLES
    icdtxt_oiux3_tx_sole =      " cdtxt
    xoiux3_tx_soledt =          " voiux3_tx_soledt
    yoiux3_tx_soledt =          " voiux3_tx_soledt
    .  "  OIUX3_TX_SOLE_WRITE_DOCUMENT

ABAP code example for Function Module OIUX3_TX_SOLE_WRITE_DOCUMENT





The ABAP code below is a full code listing to execute function module OIUX3_TX_SOLE_WRITE_DOCUMENT including all data declarations. The code uses the latest in-line data DECLARATION SYNTAX but I have included an ABAP code snippet at the end to show how declarations would look using the original method of declaring data variables up front. This will allow you to compare and fully understand the new inline method. Please note some of the newer syntax such as the @DATA is not available until a later 4.70 service pack (SP8).

DATA:
it_icdtxt_oiux3_tx_sole    TYPE STANDARD TABLE OF CDTXT,"TABLES PARAM
wa_icdtxt_oiux3_tx_sole  LIKE LINE OF it_icdtxt_oiux3_tx_sole
,
it_xoiux3_tx_soledt    TYPE STANDARD TABLE OF VOIUX3_TX_SOLEDT,"TABLES PARAM
wa_xoiux3_tx_soledt  LIKE LINE OF it_xoiux3_tx_soledt
,
it_yoiux3_tx_soledt    TYPE STANDARD TABLE OF VOIUX3_TX_SOLEDT,"TABLES PARAM
wa_yoiux3_tx_soledt  LIKE LINE OF it_yoiux3_tx_soledt
.



 

SELECT single OBJECTID 
  FROM CDHDR 
  INTO @DATA(ld_objectid).

 

SELECT single TCODE 
  FROM CDHDR 
  INTO @DATA(ld_tcode).

 

SELECT single UTIME 
  FROM CDHDR 
  INTO @DATA(ld_utime).

 

SELECT single UDATE 
  FROM CDHDR 
  INTO @DATA(ld_udate).

 

SELECT single USERNAME 
  FROM CDHDR 
  INTO @DATA(ld_username).

 

SELECT single PLANCHNGNR 
  FROM CDHDR 
  INTO @DATA(ld_planned_change_number).

 

SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO @DATA(ld_object_change_indicator).

 

SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO @DATA(ld_planned_or_real_changes).

 

SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO @DATA(ld_no_change_pointers).

 

SELECT single CHNGIND 
  FROM CDPOS 
  INTO @DATA(ld_upd_icdtxt_oiux3_tx_sole).

 

SELECT single CHNGIND 
  FROM CDPOS 
  INTO @DATA(ld_upd_oiux3_tx_soledt).


DATA(ld_n_oiux3_tx_solehd) = 'Check type of data required'.

DATA(ld_o_oiux3_tx_solehd) = 'Check type of data required'.
 

SELECT single CHNGIND 
  FROM CDPOS 
  INTO @DATA(ld_upd_oiux3_tx_solehd).

 

"populate fields of struture and append to itab
append wa_icdtxt_oiux3_tx_sole to it_icdtxt_oiux3_tx_sole.
 

"populate fields of struture and append to itab
append wa_xoiux3_tx_soledt to it_xoiux3_tx_soledt.
 

"populate fields of struture and append to itab
append wa_yoiux3_tx_soledt to it_yoiux3_tx_soledt.
.

CALL FUNCTION 'OIUX3_TX_SOLE_WRITE_DOCUMENT'
  EXPORTING
    objectid =                   ld_objectid
    tcode =                      ld_tcode
    utime =                      ld_utime
    udate =                      ld_udate
    username =                   ld_username
    planned_change_number =      ld_planned_change_number
    object_change_indicator =    ld_object_change_indicator
    planned_or_real_changes =    ld_planned_or_real_changes
    no_change_pointers =         ld_no_change_pointers
    upd_icdtxt_oiux3_tx_sole =    ld_upd_icdtxt_oiux3_tx_sole
    upd_oiux3_tx_soledt =        ld_upd_oiux3_tx_soledt
    n_oiux3_tx_solehd =          ld_n_oiux3_tx_solehd
    o_oiux3_tx_solehd =          ld_o_oiux3_tx_solehd
    upd_oiux3_tx_solehd =        ld_upd_oiux3_tx_solehd
  TABLES
    icdtxt_oiux3_tx_sole =       it_icdtxt_oiux3_tx_sole
    xoiux3_tx_soledt =           it_xoiux3_tx_soledt
    yoiux3_tx_soledt =           it_yoiux3_tx_soledt
    .  "  OIUX3_TX_SOLE_WRITE_DOCUMENT

IF SY-SUBRC EQ 0.
  "All OK
ENDIF.







ABAP code to compare 7.40 inline data declaration with original syntax

The below ABAP code uses the older none in-line data declarations. This allows you to see the coding differences/benefits of the later inline syntax. It may also be useful if you are using an older version of SAP as some of the newer syntax above, such as the @DATA is not available until 4.70 EHP 8.

DATA:


ld_objectid  TYPE CDHDR-OBJECTID ,
it_icdtxt_oiux3_tx_sole  TYPE STANDARD TABLE OF CDTXT ,
wa_icdtxt_oiux3_tx_sole  LIKE LINE OF it_icdtxt_oiux3_tx_sole,
ld_tcode  TYPE CDHDR-TCODE ,
it_xoiux3_tx_soledt  TYPE STANDARD TABLE OF VOIUX3_TX_SOLEDT ,
wa_xoiux3_tx_soledt  LIKE LINE OF it_xoiux3_tx_soledt,
ld_utime  TYPE CDHDR-UTIME ,
it_yoiux3_tx_soledt  TYPE STANDARD TABLE OF VOIUX3_TX_SOLEDT ,
wa_yoiux3_tx_soledt  LIKE LINE OF it_yoiux3_tx_soledt,
ld_udate  TYPE CDHDR-UDATE ,
ld_username  TYPE CDHDR-USERNAME ,
ld_planned_change_number  TYPE CDHDR-PLANCHNGNR ,
ld_object_change_indicator  TYPE CDHDR-CHANGE_IND ,
ld_planned_or_real_changes  TYPE CDHDR-CHANGE_IND ,
ld_no_change_pointers  TYPE CDHDR-CHANGE_IND ,
ld_upd_icdtxt_oiux3_tx_sole  TYPE CDPOS-CHNGIND ,
ld_upd_oiux3_tx_soledt  TYPE CDPOS-CHNGIND ,
ld_n_oiux3_tx_solehd  TYPE OIUX3_TX_SOLEHD ,
ld_o_oiux3_tx_solehd  TYPE OIUX3_TX_SOLEHD ,
ld_upd_oiux3_tx_solehd  TYPE CDPOS-CHNGIND .





SELECT single OBJECTID 
  FROM CDHDR 
  INTO ld_objectid.
 

"populate fields of struture and append to itab
append wa_icdtxt_oiux3_tx_sole to it_icdtxt_oiux3_tx_sole.

SELECT single TCODE 
  FROM CDHDR 
  INTO ld_tcode.
 

"populate fields of struture and append to itab
append wa_xoiux3_tx_soledt to it_xoiux3_tx_soledt.

SELECT single UTIME 
  FROM CDHDR 
  INTO ld_utime.
 

"populate fields of struture and append to itab
append wa_yoiux3_tx_soledt to it_yoiux3_tx_soledt.

SELECT single UDATE 
  FROM CDHDR 
  INTO ld_udate.


SELECT single USERNAME 
  FROM CDHDR 
  INTO ld_username.


SELECT single PLANCHNGNR 
  FROM CDHDR 
  INTO ld_planned_change_number.


SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO ld_object_change_indicator.


SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO ld_planned_or_real_changes.


SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO ld_no_change_pointers.


SELECT single CHNGIND 
  FROM CDPOS 
  INTO ld_upd_icdtxt_oiux3_tx_sole.


SELECT single CHNGIND 
  FROM CDPOS 
  INTO ld_upd_oiux3_tx_soledt.

ld_n_oiux3_tx_solehd = 'Check type of data required'.
ld_o_oiux3_tx_solehd = 'Check type of data required'.

SELECT single CHNGIND 
  FROM CDPOS 
  INTO ld_upd_oiux3_tx_solehd.

Contribute (Add Comments)

Please help keep this info upto date and use the comments section below to add useful hints, tips and information specific to this SAP function. This will then be available for you and other users to easily find by simply searching on the object name OIUX3_TX_SOLE_WRITE_DOCUMENT or its description.


   
 

OIUX3_TX_SOLE_WRITE_DOCUMENT - CHDO OIUX3_TX_SOLE => Gen. by RSSCD000
OIUX3_TX_RV_LOADER - Tax Reporting - Texas Tax Reversal Loader
OIUX3_TX_OIL_PROCESS_PPC - Tax Reporting - Texas Oil Process PPC
OIUX3_TX_OIL_PROCESS_PP - Tax Reporting - Texas Oil Process PP
OIUX3_TX_OIL_ADD_EDITS_PPC - Tax 2.0 - Texas Oil Additional Edits PPC
OIUX3_TX_MASTER_PROCESS_PPN - Tax Reporting - Process Texas Master PPN