HR_IT1982_WRITE_DOCUMENT SAP Function module - CHDO HR_IT1982 => Gen. by RSSCD000

HR_IT1982_WRITE_DOCUMENT is a standard SAP function module available within R/3 SAP systems depending on your version and release level. Below is the pattern details for this FM showing its interface including any import and export parameters, exceptions etc as well as any documentation contributions (Comments) specific to the object.

See here to view full function module documentation and code listing, simply by entering the name HR_IT1982_WRITE_DOCUMENT into the relevant SAP transaction such as SE37 or SE80.

Associated Function Group: HR_CDOC_IT1982
Released Date: Not Released
Processing type: Normal fucntion module

Pattern for FM HR_IT1982_WRITE_DOCUMENT - HR IT1982 WRITE DOCUMENT

CALL FUNCTION 'HR_IT1982_WRITE_DOCUMENT' "CHDO HR_IT1982 => Gen. by RSSCD000
  EXPORTING
    objectid =                  " cdhdr-objectid
    tcode =                     " cdhdr-tcode
    utime =                     " cdhdr-utime
    udate =                     " cdhdr-udate
    username =                  " cdhdr-username
    planned_change_number = SPACE  " cdhdr-planchngnr
    object_change_indicator = 'U'  " cdhdr-change_ind
    planned_or_real_changes = SPACE  " cdhdr-change_ind
    no_change_pointers = SPACE  " cdhdr-change_ind
    n_hrp1982 =                 " hrp1982
    o_hrp1982 =                 " hrp1982
    upd_hrp1982 = SPACE         " cdpos-chngind
    upd_hrt1982 = SPACE         " cdpos-chngind
  IMPORTING
    changenumber =              " cdhdr-changenr
  TABLES
    xhrt1982 =                  " vhrt1982
    yhrt1982 =                  " vhrt1982
    .  "  HR_IT1982_WRITE_DOCUMENT

ABAP code example for Function Module HR_IT1982_WRITE_DOCUMENT

The ABAP code below is a full code listing to execute function module HR_IT1982_WRITE_DOCUMENT including all data declarations. The code uses the latest in-line data DECLARATION SYNTAX but I have included an ABAP code snippet at the end to show how declarations would look using the original method of declaring data variables up front. This will allow you to compare and fully understand the new inline method. Please note some of the newer syntax such as the @DATA is not available until a later 4.70 service pack (SP8).

DATA:
ld_changenumber  
 
 TYPE CDHDR-CHANGENR
,
it_xhrt1982  
 
 TYPE STANDARD TABLE OF VHRT1982,"TABLES PARAM
wa_xhrt1982
 
 LIKE LINE OF it_xhrt1982
,
it_yhrt1982  
 
 TYPE STANDARD TABLE OF VHRT1982,"TABLES PARAM
wa_yhrt1982
 
 LIKE LINE OF it_yhrt1982
.

 

SELECT single OBJECTID 
  FROM CDHDR 
  INTO @DATA(ld_objectid).

 

SELECT single TCODE 
  FROM CDHDR 
  INTO @DATA(ld_tcode).

 

SELECT single UTIME 
  FROM CDHDR 
  INTO @DATA(ld_utime).

 

SELECT single UDATE 
  FROM CDHDR 
  INTO @DATA(ld_udate).

 

SELECT single USERNAME 
  FROM CDHDR 
  INTO @DATA(ld_username).

 

SELECT single PLANCHNGNR 
  FROM CDHDR 
  INTO @DATA(ld_planned_change_number).

 

SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO @DATA(ld_object_change_indicator).

 

SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO @DATA(ld_planned_or_real_changes).

 

SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO @DATA(ld_no_change_pointers).


DATA(ld_n_hrp1982) = 'Check type of data required'.

DATA(ld_o_hrp1982) = 'Check type of data required'.
 

SELECT single CHNGIND 
  FROM CDPOS 
  INTO @DATA(ld_upd_hrp1982).

 

SELECT single CHNGIND 
  FROM CDPOS 
  INTO @DATA(ld_upd_hrt1982).

 

"populate fields of struture and append to itab
append wa_xhrt1982 to it_xhrt1982.
 

"populate fields of struture and append to itab
append wa_yhrt1982 to it_yhrt1982.
.

CALL FUNCTION 'HR_IT1982_WRITE_DOCUMENT'
  EXPORTING
    objectid =                   ld_objectid
    tcode =                      ld_tcode
    utime =                      ld_utime
    udate =                      ld_udate
    username =                   ld_username
    planned_change_number =      ld_planned_change_number
    object_change_indicator =    ld_object_change_indicator
    planned_or_real_changes =    ld_planned_or_real_changes
    no_change_pointers =         ld_no_change_pointers
    n_hrp1982 =                  ld_n_hrp1982
    o_hrp1982 =                  ld_o_hrp1982
    upd_hrp1982 =                ld_upd_hrp1982
    upd_hrt1982 =                ld_upd_hrt1982
  IMPORTING
    changenumber =               ld_changenumber
  TABLES
    xhrt1982 =                   it_xhrt1982
    yhrt1982 =                   it_yhrt1982
    .  "  HR_IT1982_WRITE_DOCUMENT

IF SY-SUBRC EQ 0.
  "All OK
ENDIF.

ABAP code to compare 7.40 inline data declaration with original syntax

The below ABAP code uses the older none in-line data declarations. This allows you to see the coding differences/benefits of the later inline syntax. It may also be useful if you are using an older version of SAP as some of the newer syntax above, such as the @DATA is not available until 4.70 EHP 8.

DATA:

ld_changenumber
 
 TYPE CDHDR-CHANGENR ,
ld_objectid
 
 TYPE CDHDR-OBJECTID ,
it_xhrt1982
 
 TYPE STANDARD TABLE OF VHRT1982 ,
wa_xhrt1982
 
 LIKE LINE OF it_xhrt1982,
ld_tcode
 
 TYPE CDHDR-TCODE ,
it_yhrt1982
 
 TYPE STANDARD TABLE OF VHRT1982 ,
wa_yhrt1982
 
 LIKE LINE OF it_yhrt1982,
ld_utime
 
 TYPE CDHDR-UTIME ,
ld_udate
 
 TYPE CDHDR-UDATE ,
ld_username
 
 TYPE CDHDR-USERNAME ,
ld_planned_change_number
 
 TYPE CDHDR-PLANCHNGNR ,
ld_object_change_indicator
 
 TYPE CDHDR-CHANGE_IND ,
ld_planned_or_real_changes
 
 TYPE CDHDR-CHANGE_IND ,
ld_no_change_pointers
 
 TYPE CDHDR-CHANGE_IND ,
ld_n_hrp1982
 
 TYPE HRP1982 ,
ld_o_hrp1982
 
 TYPE HRP1982 ,
ld_upd_hrp1982
 
 TYPE CDPOS-CHNGIND ,
ld_upd_hrt1982
 
 TYPE CDPOS-CHNGIND .



SELECT single OBJECTID 
  FROM CDHDR 
  INTO ld_objectid.
 

"populate fields of struture and append to itab
append wa_xhrt1982 to it_xhrt1982.

SELECT single TCODE 
  FROM CDHDR 
  INTO ld_tcode.
 

"populate fields of struture and append to itab
append wa_yhrt1982 to it_yhrt1982.

SELECT single UTIME 
  FROM CDHDR 
  INTO ld_utime.


SELECT single UDATE 
  FROM CDHDR 
  INTO ld_udate.


SELECT single USERNAME 
  FROM CDHDR 
  INTO ld_username.


SELECT single PLANCHNGNR 
  FROM CDHDR 
  INTO ld_planned_change_number.


SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO ld_object_change_indicator.


SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO ld_planned_or_real_changes.


SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO ld_no_change_pointers.

ld_n_hrp1982 = 'Check type of data required'.
ld_o_hrp1982 = 'Check type of data required'.

SELECT single CHNGIND 
  FROM CDPOS 
  INTO ld_upd_hrp1982.


SELECT single CHNGIND 
  FROM CDPOS 
  INTO ld_upd_hrt1982.