SAP Function Modules
MLCCS_READ SAP Function module
MLCCS_READ is a standard SAP function module available within R/3 SAP systems depending on your version and release level. Below is the pattern details for this FM showing its interface including any import and export parameters, exceptions etc as well as any documentation contributions (Comments) specific to the object.
See here to view full function module documentation and code listing, simply by entering the name MLCCS_READ into the relevant SAP transaction such as SE37 or SE80.
Associated Function Group:
MLCCS_DBACCESS
Released Date:
Not Released
Processing type: Normal fucntion module
Pattern for FM MLCCS_READ - MLCCS READ
CALL FUNCTION 'MLCCS_READ' "
* EXPORTING
* i_refresh_buffer = "
* i_read_only_buffer = SPACE "
* i_use_buffer = 'X' "
* i_bdatj_1 = " ckmlpp-bdatj
* i_poper_1 = " ckmlpp-poper
* i_bdatj_2 = " ckmlpp-bdatj
* i_poper_2 = " ckmlpp-poper
* i_bdatj_3 = " ckmlpp-bdatj
* i_poper_3 = " ckmlpp-poper
* i_between_1_and_2 = "
* i_untper = '000' " ckmlpp-untper
* i_no_buffer_synchronize = SPACE "
* i_use_buffer_no_generic = SPACE "
* i_select_with_ir_bvalt = SPACE " xfeld
IMPORTING
e_anz_keko = " sy-dbcnt
e_anz_keph = " sy-dbcnt
et_keko = " mlccs_t_keko
et_keph = " mlccs_t_keph
et_kalnr = " ckmv0_matobj_tbl
et_lakalnr = " ckmv0_laobj_tbl
* TABLES
* it_kalnr = " ckmv0_matobj_tbl
* it_lakalnr = " ckmv0_laobj_tbl
* ir_categ = " ckmv0_yt_categ
* ir_ptyp = " ckmv0_yt_ptyp
* ir_bvalt = " ckmv0_yt_bvalt
* ir_keart = " ckmv0_yt_keart
* ir_mlcct = " ckmv0_yt_mlcct
* ir_kkzst = " ckmv0_yt_kkzst
* ir_patnr = " ckmv0_yt_patnr
* ir_dipa = " ckmv0_yt_dipa
* ir_curtp = " ckmv0_yt_curtp
EXCEPTIONS
NO_DATA_FOUND = 1 "
INPUT_DATA_INCONSISTENT = 2 "
. " MLCCS_READ
ABAP code example for Function Module MLCCS_READ
The ABAP code below is a full code listing to execute function module MLCCS_READ including all data declarations. The code uses the latest in-line data DECLARATION SYNTAX but I have included an ABAP code snippet at the end to show how declarations would look using the original method of declaring data variables up front. This will allow you to compare and fully understand the new inline method. Please note some of the newer syntax such as the @DATA is not available until a later 4.70 service pack (SP8).
| ld_e_anz_keko | TYPE SY-DBCNT , |
| ld_e_anz_keph | TYPE SY-DBCNT , |
| ld_et_keko | TYPE MLCCS_T_KEKO , |
| ld_et_keph | TYPE MLCCS_T_KEPH , |
| ld_et_kalnr | TYPE CKMV0_MATOBJ_TBL , |
| ld_et_lakalnr | TYPE CKMV0_LAOBJ_TBL , |
| it_it_kalnr | TYPE STANDARD TABLE OF CKMV0_MATOBJ_TBL,"TABLES PARAM |
| wa_it_kalnr | LIKE LINE OF it_it_kalnr , |
| it_it_lakalnr | TYPE STANDARD TABLE OF CKMV0_LAOBJ_TBL,"TABLES PARAM |
| wa_it_lakalnr | LIKE LINE OF it_it_lakalnr , |
| it_ir_categ | TYPE STANDARD TABLE OF CKMV0_YT_CATEG,"TABLES PARAM |
| wa_ir_categ | LIKE LINE OF it_ir_categ , |
| it_ir_ptyp | TYPE STANDARD TABLE OF CKMV0_YT_PTYP,"TABLES PARAM |
| wa_ir_ptyp | LIKE LINE OF it_ir_ptyp , |
| it_ir_bvalt | TYPE STANDARD TABLE OF CKMV0_YT_BVALT,"TABLES PARAM |
| wa_ir_bvalt | LIKE LINE OF it_ir_bvalt , |
| it_ir_keart | TYPE STANDARD TABLE OF CKMV0_YT_KEART,"TABLES PARAM |
| wa_ir_keart | LIKE LINE OF it_ir_keart , |
| it_ir_mlcct | TYPE STANDARD TABLE OF CKMV0_YT_MLCCT,"TABLES PARAM |
| wa_ir_mlcct | LIKE LINE OF it_ir_mlcct , |
| it_ir_kkzst | TYPE STANDARD TABLE OF CKMV0_YT_KKZST,"TABLES PARAM |
| wa_ir_kkzst | LIKE LINE OF it_ir_kkzst , |
| it_ir_patnr | TYPE STANDARD TABLE OF CKMV0_YT_PATNR,"TABLES PARAM |
| wa_ir_patnr | LIKE LINE OF it_ir_patnr , |
| it_ir_dipa | TYPE STANDARD TABLE OF CKMV0_YT_DIPA,"TABLES PARAM |
| wa_ir_dipa | LIKE LINE OF it_ir_dipa , |
| it_ir_curtp | TYPE STANDARD TABLE OF CKMV0_YT_CURTP,"TABLES PARAM |
| wa_ir_curtp | LIKE LINE OF it_ir_curtp . |
DATA(ld_i_refresh_buffer) = 'some text here'.
DATA(ld_i_read_only_buffer) = 'some text here'.
DATA(ld_i_use_buffer) = 'some text here'.
SELECT single BDATJ
FROM CKMLPP
INTO @DATA(ld_i_bdatj_1).
SELECT single POPER
FROM CKMLPP
INTO @DATA(ld_i_poper_1).
SELECT single BDATJ
FROM CKMLPP
INTO @DATA(ld_i_bdatj_2).
SELECT single POPER
FROM CKMLPP
INTO @DATA(ld_i_poper_2).
SELECT single BDATJ
FROM CKMLPP
INTO @DATA(ld_i_bdatj_3).
SELECT single POPER
FROM CKMLPP
INTO @DATA(ld_i_poper_3).
DATA(ld_i_between_1_and_2) = 'some text here'.
SELECT single UNTPER
FROM CKMLPP
INTO @DATA(ld_i_untper).
DATA(ld_i_no_buffer_synchronize) = 'some text here'.
DATA(ld_i_use_buffer_no_generic) = 'some text here'.
DATA(ld_i_select_with_ir_bvalt) = 'Check type of data required'.
"populate fields of struture and append to itab
append wa_it_kalnr to it_it_kalnr.
"populate fields of struture and append to itab
append wa_it_lakalnr to it_it_lakalnr.
"populate fields of struture and append to itab
append wa_ir_categ to it_ir_categ.
"populate fields of struture and append to itab
append wa_ir_ptyp to it_ir_ptyp.
"populate fields of struture and append to itab
append wa_ir_bvalt to it_ir_bvalt.
"populate fields of struture and append to itab
append wa_ir_keart to it_ir_keart.
"populate fields of struture and append to itab
append wa_ir_mlcct to it_ir_mlcct.
"populate fields of struture and append to itab
append wa_ir_kkzst to it_ir_kkzst.
"populate fields of struture and append to itab
append wa_ir_patnr to it_ir_patnr.
"populate fields of struture and append to itab
append wa_ir_dipa to it_ir_dipa.
"populate fields of struture and append to itab
append wa_ir_curtp to it_ir_curtp. . CALL FUNCTION 'MLCCS_READ' * EXPORTING * i_refresh_buffer = ld_i_refresh_buffer * i_read_only_buffer = ld_i_read_only_buffer * i_use_buffer = ld_i_use_buffer * i_bdatj_1 = ld_i_bdatj_1 * i_poper_1 = ld_i_poper_1 * i_bdatj_2 = ld_i_bdatj_2 * i_poper_2 = ld_i_poper_2 * i_bdatj_3 = ld_i_bdatj_3 * i_poper_3 = ld_i_poper_3 * i_between_1_and_2 = ld_i_between_1_and_2 * i_untper = ld_i_untper * i_no_buffer_synchronize = ld_i_no_buffer_synchronize * i_use_buffer_no_generic = ld_i_use_buffer_no_generic * i_select_with_ir_bvalt = ld_i_select_with_ir_bvalt IMPORTING e_anz_keko = ld_e_anz_keko e_anz_keph = ld_e_anz_keph et_keko = ld_et_keko et_keph = ld_et_keph et_kalnr = ld_et_kalnr et_lakalnr = ld_et_lakalnr * TABLES * it_kalnr = it_it_kalnr * it_lakalnr = it_it_lakalnr * ir_categ = it_ir_categ * ir_ptyp = it_ir_ptyp * ir_bvalt = it_ir_bvalt * ir_keart = it_ir_keart * ir_mlcct = it_ir_mlcct * ir_kkzst = it_ir_kkzst * ir_patnr = it_ir_patnr * ir_dipa = it_ir_dipa * ir_curtp = it_ir_curtp EXCEPTIONS NO_DATA_FOUND = 1 INPUT_DATA_INCONSISTENT = 2 . " MLCCS_READ
IF SY-SUBRC EQ 0. "All OK ELSEIF SY-SUBRC EQ 1. "Exception "Add code for exception here ELSEIF SY-SUBRC EQ 2. "Exception "Add code for exception here ENDIF.
ABAP code to compare 7.40 inline data declaration with original syntax
The below ABAP code uses the older none in-line data declarations. This allows you to see the coding differences/benefits of the later inline syntax. It may also be useful if you are using an older version of SAP as some of the newer syntax above, such as the @DATA is not available until 4.70 EHP 8.
DATA:
| ld_e_anz_keko | TYPE SY-DBCNT , |
| ld_i_refresh_buffer | TYPE STRING , |
| it_it_kalnr | TYPE STANDARD TABLE OF CKMV0_MATOBJ_TBL , |
| wa_it_kalnr | LIKE LINE OF it_it_kalnr, |
| ld_e_anz_keph | TYPE SY-DBCNT , |
| ld_i_read_only_buffer | TYPE STRING , |
| it_it_lakalnr | TYPE STANDARD TABLE OF CKMV0_LAOBJ_TBL , |
| wa_it_lakalnr | LIKE LINE OF it_it_lakalnr, |
| ld_et_keko | TYPE MLCCS_T_KEKO , |
| ld_i_use_buffer | TYPE STRING , |
| it_ir_categ | TYPE STANDARD TABLE OF CKMV0_YT_CATEG , |
| wa_ir_categ | LIKE LINE OF it_ir_categ, |
| ld_et_keph | TYPE MLCCS_T_KEPH , |
| ld_i_bdatj_1 | TYPE CKMLPP-BDATJ , |
| it_ir_ptyp | TYPE STANDARD TABLE OF CKMV0_YT_PTYP , |
| wa_ir_ptyp | LIKE LINE OF it_ir_ptyp, |
| ld_et_kalnr | TYPE CKMV0_MATOBJ_TBL , |
| ld_i_poper_1 | TYPE CKMLPP-POPER , |
| it_ir_bvalt | TYPE STANDARD TABLE OF CKMV0_YT_BVALT , |
| wa_ir_bvalt | LIKE LINE OF it_ir_bvalt, |
| ld_et_lakalnr | TYPE CKMV0_LAOBJ_TBL , |
| ld_i_bdatj_2 | TYPE CKMLPP-BDATJ , |
| it_ir_keart | TYPE STANDARD TABLE OF CKMV0_YT_KEART , |
| wa_ir_keart | LIKE LINE OF it_ir_keart, |
| it_ir_mlcct | TYPE STANDARD TABLE OF CKMV0_YT_MLCCT , |
| wa_ir_mlcct | LIKE LINE OF it_ir_mlcct, |
| ld_i_poper_2 | TYPE CKMLPP-POPER , |
| it_ir_kkzst | TYPE STANDARD TABLE OF CKMV0_YT_KKZST , |
| wa_ir_kkzst | LIKE LINE OF it_ir_kkzst, |
| ld_i_bdatj_3 | TYPE CKMLPP-BDATJ , |
| it_ir_patnr | TYPE STANDARD TABLE OF CKMV0_YT_PATNR , |
| wa_ir_patnr | LIKE LINE OF it_ir_patnr, |
| ld_i_poper_3 | TYPE CKMLPP-POPER , |
| it_ir_dipa | TYPE STANDARD TABLE OF CKMV0_YT_DIPA , |
| wa_ir_dipa | LIKE LINE OF it_ir_dipa, |
| ld_i_between_1_and_2 | TYPE STRING , |
| it_ir_curtp | TYPE STANDARD TABLE OF CKMV0_YT_CURTP , |
| wa_ir_curtp | LIKE LINE OF it_ir_curtp, |
| ld_i_untper | TYPE CKMLPP-UNTPER , |
| ld_i_no_buffer_synchronize | TYPE STRING , |
| ld_i_use_buffer_no_generic | TYPE STRING , |
| ld_i_select_with_ir_bvalt | TYPE XFELD . |
ld_i_refresh_buffer = 'some text here'.
"populate fields of struture and append to itab
append wa_it_kalnr to it_it_kalnr.
ld_i_read_only_buffer = 'some text here'.
"populate fields of struture and append to itab
append wa_it_lakalnr to it_it_lakalnr.
ld_i_use_buffer = 'some text here'.
"populate fields of struture and append to itab
append wa_ir_categ to it_ir_categ.
SELECT single BDATJ
FROM CKMLPP
INTO ld_i_bdatj_1.
"populate fields of struture and append to itab
append wa_ir_ptyp to it_ir_ptyp.
SELECT single POPER
FROM CKMLPP
INTO ld_i_poper_1.
"populate fields of struture and append to itab
append wa_ir_bvalt to it_ir_bvalt.
SELECT single BDATJ
FROM CKMLPP
INTO ld_i_bdatj_2.
"populate fields of struture and append to itab
append wa_ir_keart to it_ir_keart.
"populate fields of struture and append to itab
append wa_ir_mlcct to it_ir_mlcct.
SELECT single POPER
FROM CKMLPP
INTO ld_i_poper_2.
"populate fields of struture and append to itab
append wa_ir_kkzst to it_ir_kkzst.
SELECT single BDATJ
FROM CKMLPP
INTO ld_i_bdatj_3.
"populate fields of struture and append to itab
append wa_ir_patnr to it_ir_patnr.
SELECT single POPER
FROM CKMLPP
INTO ld_i_poper_3.
"populate fields of struture and append to itab
append wa_ir_dipa to it_ir_dipa.
ld_i_between_1_and_2 = 'some text here'.
"populate fields of struture and append to itab
append wa_ir_curtp to it_ir_curtp.
SELECT single UNTPER
FROM CKMLPP
INTO ld_i_untper.
ld_i_no_buffer_synchronize = 'some text here'.
ld_i_use_buffer_no_generic = 'some text here'.
ld_i_select_with_ir_bvalt = 'Check type of data required'.
Contribute (Add Comments)
Please help keep this info upto date and use the comments section below to add useful hints, tips and information specific to this SAP function. This will then be available for you and other users to easily find by simply searching on the object name MLCCS_READ or its description.