SAP Function Modules

comments icon Comments

ISU_ECCARD_WRITE_DOCUMENT SAP Function module - CHDO ISU_ECCARD => Gen. by RSSCD000







ISU_ECCARD_WRITE_DOCUMENT is a standard SAP function module available within R/3 SAP systems depending on your version and release level. Below is the pattern details for this FM showing its interface including any import and export parameters, exceptions etc as well as any documentation contributions (Comments) specific to the object.

See here to view full function module documentation and code listing, simply by entering the name ISU_ECCARD_WRITE_DOCUMENT into the relevant SAP transaction such as SE37 or SE80.

Associated Function Group: ECONCESSCARD
Released Date: Not Released
Processing type: Start of update delayed (Start Delayed)
update module start delayed settings


Pattern for FM ISU_ECCARD_WRITE_DOCUMENT - ISU ECCARD WRITE DOCUMENT 





CALL FUNCTION 'ISU_ECCARD_WRITE_DOCUMENT' "CHDO ISU_ECCARD => Gen. by RSSCD000
  EXPORTING
    objectid =                  " cdhdr-objectid
    tcode =                     " cdhdr-tcode
    utime =                     " cdhdr-utime
    udate =                     " cdhdr-udate
    username =                  " cdhdr-username
    planned_change_number = SPACE  " cdhdr-planchngnr
    object_change_indicator = 'U'  " cdhdr-change_ind
    planned_or_real_changes = SPACE  " cdhdr-change_ind
    no_change_pointers = SPACE  " cdhdr-change_ind
    upd_icdtxt_isu_eccard = SPACE  " cdpos-chngind
    n_econcard =                " econcard
    o_econcard =                " econcard
    upd_econcard = SPACE        " cdpos-chngind
    upd_econcardh = SPACE       " cdpos-chngind
  TABLES
    icdtxt_isu_eccard =         " cdtxt
    xeconcardh =                " veconcardh
    yeconcardh =                " veconcardh
    .  "  ISU_ECCARD_WRITE_DOCUMENT

ABAP code example for Function Module ISU_ECCARD_WRITE_DOCUMENT





The ABAP code below is a full code listing to execute function module ISU_ECCARD_WRITE_DOCUMENT including all data declarations. The code uses the latest in-line data DECLARATION SYNTAX but I have included an ABAP code snippet at the end to show how declarations would look using the original method of declaring data variables up front. This will allow you to compare and fully understand the new inline method. Please note some of the newer syntax such as the @DATA is not available until a later 4.70 service pack (SP8).

DATA:
it_icdtxt_isu_eccard    TYPE STANDARD TABLE OF CDTXT,"TABLES PARAM
wa_icdtxt_isu_eccard  LIKE LINE OF it_icdtxt_isu_eccard
,
it_xeconcardh    TYPE STANDARD TABLE OF VECONCARDH,"TABLES PARAM
wa_xeconcardh  LIKE LINE OF it_xeconcardh
,
it_yeconcardh    TYPE STANDARD TABLE OF VECONCARDH,"TABLES PARAM
wa_yeconcardh  LIKE LINE OF it_yeconcardh
.



 

SELECT single OBJECTID 
  FROM CDHDR 
  INTO @DATA(ld_objectid).

 

SELECT single TCODE 
  FROM CDHDR 
  INTO @DATA(ld_tcode).

 

SELECT single UTIME 
  FROM CDHDR 
  INTO @DATA(ld_utime).

 

SELECT single UDATE 
  FROM CDHDR 
  INTO @DATA(ld_udate).

 

SELECT single USERNAME 
  FROM CDHDR 
  INTO @DATA(ld_username).

 

SELECT single PLANCHNGNR 
  FROM CDHDR 
  INTO @DATA(ld_planned_change_number).

 

SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO @DATA(ld_object_change_indicator).

 

SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO @DATA(ld_planned_or_real_changes).

 

SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO @DATA(ld_no_change_pointers).

 

SELECT single CHNGIND 
  FROM CDPOS 
  INTO @DATA(ld_upd_icdtxt_isu_eccard).


DATA(ld_n_econcard) = 'Check type of data required'.

DATA(ld_o_econcard) = 'Check type of data required'.
 

SELECT single CHNGIND 
  FROM CDPOS 
  INTO @DATA(ld_upd_econcard).

 

SELECT single CHNGIND 
  FROM CDPOS 
  INTO @DATA(ld_upd_econcardh).

 

"populate fields of struture and append to itab
append wa_icdtxt_isu_eccard to it_icdtxt_isu_eccard.
 

"populate fields of struture and append to itab
append wa_xeconcardh to it_xeconcardh.
 

"populate fields of struture and append to itab
append wa_yeconcardh to it_yeconcardh.
.

CALL FUNCTION 'ISU_ECCARD_WRITE_DOCUMENT'
  EXPORTING
    objectid =                   ld_objectid
    tcode =                      ld_tcode
    utime =                      ld_utime
    udate =                      ld_udate
    username =                   ld_username
    planned_change_number =      ld_planned_change_number
    object_change_indicator =    ld_object_change_indicator
    planned_or_real_changes =    ld_planned_or_real_changes
    no_change_pointers =         ld_no_change_pointers
    upd_icdtxt_isu_eccard =      ld_upd_icdtxt_isu_eccard
    n_econcard =                 ld_n_econcard
    o_econcard =                 ld_o_econcard
    upd_econcard =               ld_upd_econcard
    upd_econcardh =              ld_upd_econcardh
  TABLES
    icdtxt_isu_eccard =          it_icdtxt_isu_eccard
    xeconcardh =                 it_xeconcardh
    yeconcardh =                 it_yeconcardh
    .  "  ISU_ECCARD_WRITE_DOCUMENT

IF SY-SUBRC EQ 0.
  "All OK
ENDIF.







ABAP code to compare 7.40 inline data declaration with original syntax

The below ABAP code uses the older none in-line data declarations. This allows you to see the coding differences/benefits of the later inline syntax. It may also be useful if you are using an older version of SAP as some of the newer syntax above, such as the @DATA is not available until 4.70 EHP 8.

DATA:


ld_objectid  TYPE CDHDR-OBJECTID ,
it_icdtxt_isu_eccard  TYPE STANDARD TABLE OF CDTXT ,
wa_icdtxt_isu_eccard  LIKE LINE OF it_icdtxt_isu_eccard,
ld_tcode  TYPE CDHDR-TCODE ,
it_xeconcardh  TYPE STANDARD TABLE OF VECONCARDH ,
wa_xeconcardh  LIKE LINE OF it_xeconcardh,
ld_utime  TYPE CDHDR-UTIME ,
it_yeconcardh  TYPE STANDARD TABLE OF VECONCARDH ,
wa_yeconcardh  LIKE LINE OF it_yeconcardh,
ld_udate  TYPE CDHDR-UDATE ,
ld_username  TYPE CDHDR-USERNAME ,
ld_planned_change_number  TYPE CDHDR-PLANCHNGNR ,
ld_object_change_indicator  TYPE CDHDR-CHANGE_IND ,
ld_planned_or_real_changes  TYPE CDHDR-CHANGE_IND ,
ld_no_change_pointers  TYPE CDHDR-CHANGE_IND ,
ld_upd_icdtxt_isu_eccard  TYPE CDPOS-CHNGIND ,
ld_n_econcard  TYPE ECONCARD ,
ld_o_econcard  TYPE ECONCARD ,
ld_upd_econcard  TYPE CDPOS-CHNGIND ,
ld_upd_econcardh  TYPE CDPOS-CHNGIND .





SELECT single OBJECTID 
  FROM CDHDR 
  INTO ld_objectid.
 

"populate fields of struture and append to itab
append wa_icdtxt_isu_eccard to it_icdtxt_isu_eccard.

SELECT single TCODE 
  FROM CDHDR 
  INTO ld_tcode.
 

"populate fields of struture and append to itab
append wa_xeconcardh to it_xeconcardh.

SELECT single UTIME 
  FROM CDHDR 
  INTO ld_utime.
 

"populate fields of struture and append to itab
append wa_yeconcardh to it_yeconcardh.

SELECT single UDATE 
  FROM CDHDR 
  INTO ld_udate.


SELECT single USERNAME 
  FROM CDHDR 
  INTO ld_username.


SELECT single PLANCHNGNR 
  FROM CDHDR 
  INTO ld_planned_change_number.


SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO ld_object_change_indicator.


SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO ld_planned_or_real_changes.


SELECT single CHANGE_IND 
  FROM CDHDR 
  INTO ld_no_change_pointers.


SELECT single CHNGIND 
  FROM CDPOS 
  INTO ld_upd_icdtxt_isu_eccard.

ld_n_econcard = 'Check type of data required'.
ld_o_econcard = 'Check type of data required'.

SELECT single CHNGIND 
  FROM CDPOS 
  INTO ld_upd_econcard.


SELECT single CHNGIND 
  FROM CDPOS 
  INTO ld_upd_econcardh.

Contribute (Add Comments)

Please help keep this info upto date and use the comments section below to add useful hints, tips and information specific to this SAP function. This will then be available for you and other users to easily find by simply searching on the object name ISU_ECCARD_WRITE_DOCUMENT or its description.


   
 

ISU_ECCARD_WRITE_DOCUMENT - CHDO ISU_ECCARD => Gen. by RSSCD000
ISU_EBP_ADDR_SERVICE_UPD_PRM - 
ISU_EBP_ADDR_SERVICE_UPD_DATE - 
ISU_EBP_ADDR_SERVICE_UPD_BP - 
ISU_EBP_ADDR_SERVICE_INSERT - 
ISU_EBP_ADDR_SERVICE_DELETE -