AY SAP Message class AfA-Simulation - Pflegebaustein (AIPS) / Stammdaten allgem.
AY is a standard message class available within your SAP system (depending on your version and release level). Below is a list of all the messages available for within this class and a link to any long text associated with each message. These messages are very simple to use and can be implemented into your ABAP code using the MESSAGE statement and the following syntax.
MESSAGE I001(AY).
Note the value "I" represents an information messsage but can be replaced with E for error, W for warning, S for Status/Success, A for Abend/Termination and X for exit which does not display a message and causes a runtime error. Click here for more information about SAP Messages.
Messages can also contain the & symbol, this means custom values can be added to the message when it is displayed, this is done using the WITH statement
MESSAGE I001(AY) with ld_field1.
Message class details can be viewed directly within your SAP system by entering the object name AY into the relevant SAP transaction such as SE91 or SE80.
000 - **** Master data 001 - 289
001 - No object number was entered
Additional information exists about message 001 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 001 class ay.002 - Transaction type & is not supported
Additional information exists about message 002 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 002 class ay.003 - Company code & is not for Asset Accounting
Additional information exists about message 003 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 003 class ay.004 - Inconsistent data - no depreciation area for object &
Additional information exists about message 004 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 004 class ay.005 - No depr. simulation parameters exist
Additional information exists about message 005 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 005 class ay.006 - Company code & is not for Asset Accounting
Additional information exists about message 006 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 006 class ay.007 - Asset class & not defined for AuC. Please correct.
Additional information exists about message 007 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 007 class ay.008 - Company code was not transferred
Additional information exists about message 008 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 008 class ay.009 - Investment percentage rate larger than &. Check.
Additional information exists about message 009 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 009 class ay.010 - Start-up date & is in or before closed fiscal year &. Please check.
Additional information exists about message 010 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 010 class ay.011 - Start-up date & from previous years changed. Please check.
Additional information exists about message 011 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 011 class ay.012 - Co. code & was transferred to depr. simulation data. Please check.
Additional information exists about message 012 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 012 class ay.013 - Depreciation simulation data deleted due to change of company code
Additional information exists about message 013 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 013 class ay.014 - Depreciation simulation data are available.
Additional information exists about message 014 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 014 class ay.015 - Depreciation simulation data deleted due to change of company code
Additional information exists about message 015 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 015 class ay.016 - Depreciation simulation data deleted due to change of company code
Additional information exists about message 016 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 016 class ay.017 - Activity type not checked if there is no controlling area
Additional information exists about message 017 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 017 class ay.018 - Depr. area & is deactivated or not in asset class &
Additional information exists about message 018 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 018 class ay.019 - Depr. area & is not defined in chart of accounts &
Additional information exists about message 019 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 019 class ay.020 - Depreciation start was in closed year. Please check change.
Additional information exists about message 020 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 020 class ay.021 - Depreciation start in closed year. Should be after &V1&
Additional information exists about message 021 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 021 class ay.022 - Special depr. start was in closed year. Please check change.
Additional information exists about message 022 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 022 class ay.023 - Special depr. start in closed year. Should be after &V1&
Additional information exists about message 023 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 023 class ay.024 - Interest start date in closed year. Please check change.
Additional information exists about message 024 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 024 class ay.025 - Interest start date in closed year. Should be after &V1&
Additional information exists about message 025 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 025 class ay.026 - No assets under const. exist for cap. inv. measure &
Additional information exists about message 026 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 026 class ay.027 - Cap. inv. profile & does not exist (please check)
Additional information exists about message 027 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 027 class ay.028 - Asset class & does not exist (Check your entry)
Additional information exists about message 028 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 028 class ay.029 - Parameter for reading asset class is missing (check)
Additional information exists about message 029 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 029 class ay.030 - Parameter for company code is missing (check)
Additional information exists about message 030 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 030 class ay.031 - Parameter for chart of accounts is missing (check)
Additional information exists about message 031 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 031 class ay.032 - Asset class & is only for cap. inv. measures (please correct)
Additional information exists about message 032 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 032 class ay.033 - Table for screen selection fields missing (please correct)
Additional information exists about message 033 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 033 class ay.034 - You have not maintained an investment profile (please correct)
Additional information exists about message 034 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 034 class ay.035 - The business area is taken over from the cost center (please check)
Additional information exists about message 035 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 035 class ay.036 - Selection of this row is removed, since row is empty
037 - You have set the distribution percentage rate to '0' (please correct)
Additional information exists about message 037 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 037 class ay.038 - Distribution of over 100 percent is not possible (please correct)
039 - Please carry out full distribution (100 percent)
Additional information exists about message 039 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 039 class ay.040 - No valid entry was chosen (please correct)
Additional information exists about message 040 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 040 class ay.041 - Detail process. only possible at time of complete distribution (correct)
Additional information exists about message 041 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 041 class ay.042 - No distributions are selected for deletion (please correct)
Additional information exists about message 042 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 042 class ay.043 - WBS element & is not statistical. Please correct.
Additional information exists about message 043 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 043 class ay.044 - Mark asset as either 'new' or 'secondhand'.
Additional information exists about message 044 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 044 class ay.045 - Document link not possible during creation
Additional information exists about message 045 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 045 class ay.046 - Make one selection only
Additional information exists about message 046 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 046 class ay.047 - Group assets cannot be managed in company code &
Additional information exists about message 047 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 047 class ay.048 - No additional specifications exist for asset class &
Additional information exists about message 048 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 048 class ay.049 - Main asset number may not contain '&'
Additional information exists about message 049 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 049 class ay.050 - SYST: ANLI not updated (contact your system specialist)
Additional information exists about message 050 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 050 class ay.051 - Field group type & not supported (contact system administrator)
Additional information exists about message 051 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 051 class ay.052 - Field & not found - field cannot be modified
Additional information exists about message 052 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 052 class ay.053 - No field group found for this field - field cannot be modified
Additional information exists about message 053 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 053 class ay.054 - Screen layout rule '&' '&' is not defined
Additional information exists about message 054 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 054 class ay.055 - Transfer param. & not supported (please inform system specialist)
Additional information exists about message 055 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 055 class ay.056 - Transfer param. & not supported (please inform system specialist)
Additional information exists about message 056 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 056 class ay.057 - Screen layout rule not transferred (please inform system specialist)
Additional information exists about message 057 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 057 class ay.058 - Field name not transferred (please inform system specialist)
Additional information exists about message 058 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 058 class ay.059 - Incorrect view & transferred (please inform system manager)
Additional information exists about message 059 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 059 class ay.060 - Depreciation area information missing (please inform system manager)
Additional information exists about message 060 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 060 class ay.061 - Screen layout rule & & does not exist (please correct)
Additional information exists about message 061 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 061 class ay.062 - Object number for changing the screen layout rule is missing
Additional information exists about message 062 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 062 class ay.063 - No changes carried out, because the change indicators are missing
Additional information exists about message 063 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 063 class ay.064 - Field group &3 is missing in field selection string &1 &2.
Additional information exists about message 064 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 064 class ay.065 - Field group &3 is modified in field selection string &1 &2- System error
Additional information exists about message 065 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 065 class ay.066 - The field &1, table &2, field name &3 is missing - system error
Additional information exists about message 066 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 066 class ay.067 - The field &1, table &2, field name &3 is modified - system error
Additional information exists about message 067 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 067 class ay.068 - Business area & does not exist
Additional information exists about message 068 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 068 class ay.069 - Select end of range
Additional information exists about message 069 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 069 class ay.070 - Transaction type &1, session &2 is not supported by the system
Additional information exists about message 070 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 070 class ay.071 - Only positive values are allowed
Additional information exists about message 071 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 071 class ay.072 - &3: Investment profile &1 does not allow source structure &2
Additional information exists about message 072 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 072 class ay.073 - &3: Source assignments not maintained
Additional information exists about message 073 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 073 class ay.074 - Position cursor on a line in the list
Additional information exists about message 074 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 074 class ay.075 - Missing assets under construction created successfully
Additional information exists about message 075 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 075 class ay.076 - Missing assets not created. Please enter manually.
Additional information exists about message 076 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 076 class ay.077 - &3: You are not permitted to change capital investment profile &2
Additional information exists about message 077 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 077 class ay.078 - &3: You cannot change source structure &2
Additional information exists about message 078 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 078 class ay.079 - &3: You cannot change company code &2
Additional information exists about message 079 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 079 class ay.080 - &3: AuCs exist for capital investment profile &2
Additional information exists about message 080 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 080 class ay.081 - &3: AuC exists for source structure &2
Additional information exists about message 081 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 081 class ay.082 - &3: AuCs exist for company code &2
Additional information exists about message 082 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 082 class ay.083 - &3: AuCs exist for capital investment profile &2
Additional information exists about message 083 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 083 class ay.084 - &3: AuC exists for source structure &2
Additional information exists about message 084 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 084 class ay.085 - &3: AuCs exist for company code &2
Additional information exists about message 085 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 085 class ay.086 - &2: You cannot change capital investment profile &1
Additional information exists about message 086 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 086 class ay.087 - &2: AuC exists for capital investment profile &1
Additional information exists about message 087 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 087 class ay.088 - &2: AuC exists for capital investment profile &1
Additional information exists about message 088 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 088 class ay.089 - &4: AuC missing for origin assignment &1
Additional information exists about message 089 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 089 class ay.090 - Sample order &1 blocked by &2 - no maintainance possible.
Additional information exists about message 090 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 090 class ay.091 - &2: There are too many AuCs, deletion is not possible
Additional information exists about message 091 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 091 class ay.092 - &2: There are too many AuCs
Additional information exists about message 092 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 092 class ay.093 - &2: There are too many AuCs
Additional information exists about message 093 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 093 class ay.094 - &4: AuC has no valid origin assignment, deletion is not possible
Additional information exists about message 094 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 094 class ay.095 - &4: There is an AuC with no valid origin assignment
Additional information exists about message 095 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 095 class ay.096 - &4: There is an AuC with no valid origin assignment
Additional information exists about message 096 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 096 class ay.097 - &1 is not a capital investment measure
Additional information exists about message 097 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 097 class ay.098 - &2: System status requires an AuC
Additional information exists about message 098 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 098 class ay.099 - &2: System status requires an AuC
Additional information exists about message 099 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 099 class ay.100 - SYST:Error in creation of ANIA (Contact your System Specialist)
Additional information exists about message 100 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 100 class ay.101 - SYST:Error in changing ANIA (Contact your System Specialist)
Additional information exists about message 101 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 101 class ay.102 - SYST:Error in deleting ANIA (Contact your System Specialist)
Additional information exists about message 102 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 102 class ay.103 - SYST:Error in creating ANIB (Contact your System Specialist)
Additional information exists about message 103 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 103 class ay.104 - SYST:Error in changing ANIB (Contact your System Specialist)
Additional information exists about message 104 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 104 class ay.105 - SYST:Error in deleting ANIB (Contact your System Specialist)
Additional information exists about message 105 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 105 class ay.106 - You cannot use asset class & for capital-investment measures
Additional information exists about message 106 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 106 class ay.107 - You can use asset class & for capital-investment measures only
Additional information exists about message 107 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 107 class ay.108 - The asset is not posted, hence no recalculation.
Additional information exists about message 108 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 108 class ay.109 - You cannot deactive asset &1 &2. (Please check.)
Additional information exists about message 109 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 109 class ay.110 - There is no asset class for creating an asset without dialog.
Additional information exists about message 110 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 110 class ay.111 - There is no ANLI for asset &1 &2 in company code &3
Additional information exists about message 111 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 111 class ay.112 - No changes took place as a result of the new calculation
Additional information exists about message 112 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 112 class ay.113 - Check investment support - see recommendations in long text
Additional information exists about message 113 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 113 class ay.114 - Asset class &1 allows only group assets. Please correct.
Additional information exists about message 114 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 114 class ay.115 - Manual insurance year &2 is after current fiscal year &1
Additional information exists about message 115 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 115 class ay.116 - System error: The run-time object for table &1 could not be found.
Additional information exists about message 116 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 116 class ay.117 - & & is in the future
Additional information exists about message 117 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 117 class ay.118 - Not possible to mark for deletion (functional location exists)
Additional information exists about message 118 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 118 class ay.119 - Not possible to mark for deletion (equipment exists)
Additional information exists about message 119 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 119 class ay.120 - Not possible to delete AuC &2 &3. Please check.
Additional information exists about message 120 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 120 class ay.121 - The trans. type groups &1 and &2 for transfers are being deleted. Check.
Additional information exists about message 121 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 121 class ay.122 - Trans. type groups &1 and &2 for downpymts are being deactivated. Check.
Additional information exists about message 122 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 122 class ay.123 - Asset &1 &2 is a capital investment measure - not an old asset
Additional information exists about message 123 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 123 class ay.124 - &1 is statistical - no asset under const. is created
Additional information exists about message 124 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 124 class ay.125 - &1: Cannot set statistical indicator - asset u. cons. exists
Additional information exists about message 125 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 125 class ay.126 - &1: Statistical indicator was set - asset u. cons. will be deleted
Additional information exists about message 126 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 126 class ay.127 - &1: Settlement already carried out - you cannot create AuC
Additional information exists about message 127 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 127 class ay.128 - &1: Statistical ind. was set - AuC exists, and has to be deleted
Additional information exists about message 128 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 128 class ay.129 - &1: Indicator 'AuC per source structure...' not set.
Additional information exists about message 129 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 129 class ay.130 - &1: Source assignments for srce struct. &3 missing in investmt.prof. &2
Additional information exists about message 130 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 130 class ay.131 - Asset &1 &2 is not a capital investment measure
Additional information exists about message 131 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 131 class ay.132 - Investment profile &1 does not exist
Additional information exists about message 132 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 132 class ay.133 - Revaluation area &1 is not in Customizing for legacy data transfer
Additional information exists about message 133 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 133 class ay.134 - Revaluation area &1 is not in Customizing for legacy data transfer
Additional information exists about message 134 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 134 class ay.135 - It is not possible to deactivate in fiscal year &1
Additional information exists about message 135 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 135 class ay.136 - Maintain scrap value in foreign currency in dep.area &
Additional information exists about message 136 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 136 class ay.137 - When entering the amount, also enter the origin year
Additional information exists about message 137 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 137 class ay.138 - When entering the amount, also enter the cost element
Additional information exists about message 138 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 138 class ay.139 - The entered year &2 is after the current year &1 - please correct
Additional information exists about message 139 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 139 class ay.140 - Origin for fiscal year &1 cost element &2 cost center &3 already exists
Additional information exists about message 140 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 140 class ay.141 - Maintain fiscal year and cost element, when origin object is entered
Additional information exists about message 141 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 141 class ay.142 - SYST: ANLK insert terminated (contact your system specialist)
143 - SYST: ANLK update terminated (contact your system specialist)
144 - SYST: ANLK delete terminated (contact your system specialist)
145 - The entered year &2 is after the closed fisc. year &1 - please correct
Additional information exists about message 145 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 145 class ay.146 - Simultaneous acct assignmnt to order and WBS element not possible
Additional information exists about message 146 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 146 class ay.147 - The total of origin &1 does not correspond to the APC &2
Additional information exists about message 147 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 147 class ay.148 - Also maintain the cost center for activity type &1
Additional information exists about message 148 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 148 class ay.149 - Cost center / activity type does not exist for &1 &2 in fiscal year &3
Additional information exists about message 149 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 149 class ay.150 - '&' is not allowed as first character in the asset main number
151 - Dep. key/useful life were changed. The system calculated new values.
Additional information exists about message 151 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 151 class ay.152 - Enter supplier
Additional information exists about message 152 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 152 class ay.153 - The deactivation date is before the last transaction
Additional information exists about message 153 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 153 class ay.154 - The name of the supplier will be overwritten
Additional information exists about message 154 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 154 class ay.155 - Selected value was not adopted.
Additional information exists about message 155 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 155 class ay.156 - No authorization for entering a business area
157 - Customizing inconsistency - business area was set as ready for input
Additional information exists about message 157 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 157 class ay.158 - Deletion flag was removed.
Additional information exists about message 158 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 158 class ay.159 - Customizing inconsistency - missing/incorrect entry in table T093B
Additional information exists about message 159 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 159 class ay.160 - No depreciation area in company code & allows group assets.
Additional information exists about message 160 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 160 class ay.161 - Deleting is not possible. The asset already has values.
Additional information exists about message 161 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 161 class ay.162 - Deleting is not possible. The group asset already has values.
Additional information exists about message 162 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 162 class ay.163 - Deleting is not possible. Transactions already exist.
Additional information exists about message 163 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 163 class ay.164 - Required entry field &1 in investment measure &2 &3 is not completed
Additional information exists about message 164 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 164 class ay.165 - Deprec. simulation data already exist - copying is not necessary
166 - Depreciation simulation data was already copied - system error
167 - Company code &1 has different chart of dep. (&2) - copying not possible
168 - Program error. Contact your system administrator.
Additional information exists about message 168 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 168 class ay.169 - You cannot create multiple assets using external number assignment
Additional information exists about message 169 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 169 class ay.170 - Assets &2 to &3 have been created
Additional information exists about message 170 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 170 class ay.171 - Group assets &2 to &3 have been created
Additional information exists about message 171 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 171 class ay.172 - Enter a number greater than or equal to 1
173 - The location does not have an address assignment. Display not possible.
Additional information exists about message 173 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 173 class ay.174 - 'Display address' function only possible in screen displaying location
Additional information exists about message 174 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 174 class ay.175 - Asset is not assigned to a location. Display not possible.
Additional information exists about message 175 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 175 class ay.176 - Settlement rule already contains rules with percentage rates
Additional information exists about message 176 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 176 class ay.177 - Settlement profile & does not allow assets as receivers
Additional information exists about message 177 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 177 class ay.178 - Settlement profile & does not allow settlement using equivalence numbers
Additional information exists about message 178 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 178 class ay.179 - The maximum number of settlement rules has been reached
Additional information exists about message 179 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 179 class ay.180 - The maximum number of distribution rules has been exceeded
Additional information exists about message 180 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 180 class ay.181 - Selected field does not have contents.
Additional information exists about message 181 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 181 class ay.182 - This field is not intended for navigation
Additional information exists about message 182 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 182 class ay.183 - Screen & does not exist
Additional information exists about message 183 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 183 class ay.184 - & assets created internally, and distribution rules created
Additional information exists about message 184 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 184 class ay.185 - System error. Asset & not found.
Additional information exists about message 185 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 185 class ay.186 - The asset class you entered is ignored
Additional information exists about message 186 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 186 class ay.187 - Asset & & belongs to an investment measure. Deletion not allowed.
Additional information exists about message 187 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 187 class ay.188 - The maximum number of distribution rules has been exceeded
Additional information exists about message 188 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 188 class ay.189 - & assets created and distribution rules created
Additional information exists about message 189 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 189 class ay.190 - First enter a capitalization date
Additional information exists about message 190 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 190 class ay.191 - Enter an asset class or a reference asset
Additional information exists about message 191 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 191 class ay.192 - The maximum number of distribution rules was exceeded
Additional information exists about message 192 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 192 class ay.193 - Assets were already created
Additional information exists about message 193 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 193 class ay.194 - Main number is not a group asset
Additional information exists about message 194 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 194 class ay.195 - Main number is a group asset
Additional information exists about message 195 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 195 class ay.196 - Internal error. Layout & not found.
Additional information exists about message 196 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 196 class ay.197 - Depreciation area &4 is not active in the asset class
Additional information exists about message 197 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 197 class ay.198 - Enter the requesting company code for the depreciation simulation data
Additional information exists about message 198 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 198 class ay.199 - Enter a from-date after &
Additional information exists about message 199 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 199 class ay.200 - Enter a from-date before &
Additional information exists about message 200 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 200 class ay.201 - All intervals could not be deleted
Additional information exists about message 201 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 201 class ay.202 - Function not possible
Additional information exists about message 202 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 202 class ay.203 - You cannot enter 'to main number' and 'to subnumber' at same time
Additional information exists about message 203 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 203 class ay.204 - Enter main number
Additional information exists about message 204 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 204 class ay.205 - Subnumber is ignored
Additional information exists about message 205 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 205 class ay.206 - No assets found
Additional information exists about message 206 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 206 class ay.207 - Invalid from-date
Additional information exists about message 207 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 207 class ay.208 - Customizing inconsistency- business area is suppressed
Additional information exists about message 208 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 208 class ay.209 - Customizing inconsistency- No view has authorization for business area
Additional information exists about message 209 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 209 class ay.210 - Tab layout inconsistent with screen layout
Additional information exists about message 210 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 210 class ay.211 - Main number does not have a business area
Additional information exists about message 211 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 211 class ay.212 - Enter a number less than or equal to &1
Additional information exists about message 212 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 212 class ay.213 - &3 assets are ignored
Additional information exists about message 213 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 213 class ay.214 - Selected intervals were deleted
215 - The distribution does not work mathematically
Additional information exists about message 215 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 215 class ay.216 - The distribution does not work mathematically
Additional information exists about message 216 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 216 class ay.217 - Maintain the company code for the depreciation simulation data.
218 - No change parameter given for depreciation area &1
Additional information exists about message 218 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 218 class ay.219 - Field &1 is not ready for input
Additional information exists about message 219 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 219 class ay.220 - Time interval from &2 to &3 does not exist
Additional information exists about message 220 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 220 class ay.221 - Depreciation area &1 does not exist
Additional information exists about message 221 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 221 class ay.222 - Entry does not exist
223 - Internal error: Settlement profile could not be found
Additional information exists about message 223 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 223 class ay.224 - Table ANLBZW not updated
Additional information exists about message 224 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 224 class ay.225 - 'Deprec. areas' group box is not in the tab layout
Additional information exists about message 225 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 225 class ay.226 - Entered asset class not the same as class & of main number
Additional information exists about message 226 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 226 class ay.227 - Depreciation start cannot be determined
228 - Manual maintenance year is in closed fiscal year
Additional information exists about message 228 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 228 class ay.229 - Deletion is not possible (there are parked documents for the asset)
230 - COarea: &1 - full version <> legal version - line item settlmt impossible
Additional information exists about message 230 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 230 class ay.231 - &1 &2
232 - Enter depreciation key with ordinary depreciation
233 - Enter depreciation key with special depreciation
234 - Enter depreciation key with interest calculation
235 - Enter a number less than or equal to &1
236 - Position the cursor on the field of a group box
237 - Invalid screen layout rule in asset class &1, ch. of deprec. &2
Additional information exists about message 237 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 237 class ay.238 - Choose a task
239 - Asset class &1 does not contain any active depreciation areas
Additional information exists about message 239 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 239 class ay.240 - Combination of equip. type &1 and tech. object type &2 not allowed
Additional information exists about message 240 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 240 class ay.241 - Required entry field &1 not supplied with values - asset not created
Additional information exists about message 241 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 241 class ay.242 - Required entry field &1 not supplied with values - asset not created
Additional information exists about message 242 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 242 class ay.243 - Table field &1 not found in Dictionary
244 - Reactivation is not possible - asset is already archived
Additional information exists about message 244 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 244 class ay.245 - When you save asset &1, equipment records are also changed
Additional information exists about message 245 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 245 class ay.246 - Equipment records that were selected but not yet created were deleted
247 - Only equipment that was selected but not yet created can be deleted
248 - A required parameter was not transferred
249 - Direction &1 unknown
250 - Object cannot be diplayed
251 - Old distributions are not saved - check
252 - Current fiscal year &1 has to be after transfer date &2
253 - Deletion not possible (asset &1 - &2 is linked to RE objects)
Additional information exists about message 253 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 253 class ay.254 - Error message &1 &2 when creating AUC - order was not created
Additional information exists about message 254 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 254 class ay.255 - Account cannot be displayed - asset does not have area &1
256 - Company code &1 of real estate object not asset company code &2
Additional information exists about message 256 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 256 class ay.257 - Interval in closed fiscal year: editing not possible
258 - Display of 'Further Intervals' not possible w/ asset subnumber '****'
299 - **** Cap. investment measures ? 300 - 320
300 - Asset class & not intended for cap. investment measures
Additional information exists about message 300 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 300 class ay.301 - Indicator 'fixed default asset class' is set, asset class is missing
Additional information exists about message 301 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 301 class ay.302 - AuC per source structure and assignmt. not intended in inv. profile &
Additional information exists about message 302 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 302 class ay.303 - Changing indicators 'Manage AuC', 'AuC per source struct...' not allowed
Additional information exists about message 303 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 303 class ay.304 - Ind. 'AuC per source struct...' only allowed if 'Manage AuC' selected
Additional information exists about message 304 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 304 class ay.305 - The investment profile could not be deleted
Additional information exists about message 305 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 305 class ay.306 - &1 investment profiles could not be deleted
Additional information exists about message 306 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 306 class ay.307 - The assignment could not be deleted
Additional information exists about message 307 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 307 class ay.308 - &1 assignments could not be deleted
Additional information exists about message 308 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 308 class ay.309 - Check LVA control. See the long text.
Additional information exists about message 309 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 309 class ay.310 - AuC requires an area in the controlling area currency &1
Additional information exists about message 310 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 310 class ay.311 - Line item distribution possible only when AuC is managed
Additional information exists about message 311 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 311 class ay.312 - Depreciation simulation data is created without cost center
313 - Changes not allowed if investment profile already used
Additional information exists about message 313 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 313 class ay.314 - Cost center &1 is not included in the depreciation simulation data
Additional information exists about message 314 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 314 class ay.315 - Deprec. simulation data was already created using investment profile &1
Additional information exists about message 315 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 315 class ay.316 - Use investment profile with appropriate distribution rule; see long text
Additional information exists about message 316 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 316 class ay.350 - Depreciation area &1 does not exist in the original asset.
Additional information exists about message 350 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 350 class ay.351 - &2 is not allowed in depreciation area &1 of the target asset
Additional information exists about message 351 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 351 class ay.352 - No retirement posting was found for asset & & in depreciation area 01
Additional information exists about message 352 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 352 class ay.353 - No retirement posting was found for asset & & in depreciation area &
Additional information exists about message 353 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 353 class ay.354 - The screen layout rule is blocked by user &
Additional information exists about message 354 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 354 class ay.355 - The CATT procedure for creating an asset had errors
Additional information exists about message 355 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 355 class ay.356 - The CATT procedure for posting the asset & & had errors
Additional information exists about message 356 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 356 class ay.357 - No retirement posting was found for asset & &
Additional information exists about message 357 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 357 class ay.358 - Asset main number &1 was not yet created for asset &2
Additional information exists about message 358 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 358 class ay.359 - Worklist is not entered
Additional information exists about message 359 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 359 class ay.360 - Error during search for related objects
361 - Communication error occurred during search for related objects
Additional information exists about message 361 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 361 class ay.362 - System error during search for related objects
Additional information exists about message 362 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 362 class ay.363 - Asset values cannot be displayed due to missing texts
Additional information exists about message 363 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 363 class ay.401 - Inconsistency: maintain only percentage, amount or equivalence number
402 - Distribution amount > plan amount (difference: &1) - please correct
Additional information exists about message 402 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 402 class ay.403 - Distribution amount < plan amount (difference: &1) - correct
Additional information exists about message 403 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 403 class ay.404 - Correct distribution - invest. profile &1 allows percentage dist. only
Additional information exists about message 404 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 404 class ay.405 - Correct distribution - invest. profile &1 allows equivalence numbers only
Additional information exists about message 405 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 405 class ay.406 - Correct distribution - invest. profile &1 allows amounts only
Additional information exists about message 406 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 406 class ay.407 - Correct distribution - invest. profile &1 does not allow equiv. numbers
Additional information exists about message 407 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 407 class ay.408 - Correct distribution - invest. profile &1 does not allow percentage dist.
Additional information exists about message 408 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 408 class ay.409 - Carry out complete percentage distribution (100 percent)
Additional information exists about message 409 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 409 class ay.410 - Distribution amounts <= 0 are not permitted - please correct
411 - Negative value is not allowed - correct the value
412 - Be aware that incompleteness indicator remains
413 - Detail processing only after complete distribution of amount(pls.correct)
Additional information exists about message 413 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 413 class ay.414 - Detail processing only after complete percent. distribution (pls.correct)
Additional information exists about message 414 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 414 class ay.415 - Investment profile does not allow maintenance using amount distribution
Additional information exists about message 415 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 415 class ay.416 - Depreciation simulation data was changed
Additional information exists about message 416 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 416 class ay.417 - There are open amounts with capitalization date in the past
Additional information exists about message 417 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 417 class ay.418 - The selected actual capitalizations were adopted
Additional information exists about message 418 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 418 class ay.420 - There are open amounts with planned capitalization date in prior year
Additional information exists about message 420 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 420 class ay.421 - Distributions that were offset cannot be deleted
Additional information exists about message 421 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 421 class ay.422 - You can no longer delete distributions for fiscal year &1
Additional information exists about message 422 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 422 class ay.423 - Capitalization dates before the prior fiscal year are not allowed
Additional information exists about message 423 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 423 class ay.424 - There is no entry where the sequential number = &1
425 - Distributions cannot be created, since overall plan value = 0
Additional information exists about message 425 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 425 class ay.426 - Distributions cannot be created, since budget value = 0
Additional information exists about message 426 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 426 class ay.427 - Internal error: Company code could not be determined
Additional information exists about message 427 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 427 class ay.428 - Errors or warnings on distribution or detail screen due to validation
Additional information exists about message 428 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 428 class ay.429 - Errors or warnings on detail screen due to validation
Additional information exists about message 429 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 429 class ay.430 - Percentages <= 0 are not allowed - please correct
431 - Equivalence numbers <= 0 are not allowed - please correct
432 - You have to enter either an amount or a percentage
433 - You have to enter either an amount or an equivalence number
434 - Multiple distribution is not allowed for requesting org. units
Additional information exists about message 434 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 434 class ay.435 - Org. units are different from those in dep. simulation data - check entry
Additional information exists about message 435 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 435 class ay.436 - The adjustment was not possible for all variants - please check
Additional information exists about message 436 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 436 class ay.437 - Mixing positive and negative amounts is not allowed
Additional information exists about message 437 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 437 class ay.438 - Creating totals is not possible due to field overflow
Additional information exists about message 438 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 438 class ay.439 - Position the cursor on a valid column
440 - Choose a transaction
441 - No errors occurred
442 - Report cannot be executed using report date &1
Additional information exists about message 442 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 442 class ay.443 - A maximum of &1 areas can be selected
444 - Creating deprec.simulation data not possible without capitalization date
445 - Position the cursor on a valid row with posted depreciation
Additional information exists about message 445 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 445 class ay.446 - Original cannot be displayed for simulated asset transactions
447 - Simulation is not possible for group assets
448 - Simulation is not possible for asset subnumber '****'
449 - Accounting document cannot be displayed for simulated transactions
450 - Maximum number of distribution rules (999) reached
452 - Dep.simul. data CoCd &2; internal order &1 can be posted only in CoCd &3
Additional information exists about message 452 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 452 class ay.453 - Deprec.simul.data CoCd &2; WBS element &1 can only be posted in CoCd &3
Additional information exists about message 453 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 453 class ay.800 - **** Workflow messages 800 - 900
801 - &
802 - Asset & & is already in work list &.
803 - Asset & & is not yet in work list &.
804 - Asset & & was included in work list &.
805 - Asset & & is already in work list &.
806 - Asset & & could not be removed from work list &.
Additional information exists about message 806 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 806 class ay.807 - Asset & & was deleted from work list &.
808 - Error: & & with variables & &.
Additional information exists about message 808 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 808 class ay.809 - Asset & & was not yet included in work list &.
810 - The asset & does not belong to company code &
Additional information exists about message 810 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 810 class ay.811 - The field & could not be substituted
Additional information exists about message 811 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 811 class ay.812 - The field & could not be substituted
Additional information exists about message 812 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 812 class ay.813 - The field &V1& could not be subsituted
Additional information exists about message 813 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 813 class ay.814 - Asset &1 &2 could not be added to worklist &3
Additional information exists about message 814 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 814 class ay.815 - Entries for mass retirement are incomplete
Additional information exists about message 815 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 815 class ay.816 - Changes for worklist &1 were saved
817 - Overview of totals of several subnumbers is currently not possible
Additional information exists about message 817 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 817 class ay.818 - It is not possible to display the depreciation calculation
Additional information exists about message 818 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 818 class ay.Search for further information about these or an SAP related objects