VK SAP Message class Pflege und Bearbeitung von Konditionen
VK is a standard message class available within your SAP system (depending on your version and release level). Below is a list of all the messages available for within this class and a link to any long text associated with each message. These messages are very simple to use and can be implemented into your ABAP code using the MESSAGE statement and the following syntax.
MESSAGE I001(VK).
Note the value "I" represents an information messsage but can be replaced with E for error, W for warning, S for Status/Success, A for Abend/Termination and X for exit which does not display a message and causes a runtime error. Click here for more information about SAP Messages.
Messages can also contain the & symbol, this means custom values can be added to the message when it is displayed, this is done using the WITH statement
MESSAGE I001(VK) with ld_field1.
Message class details can be viewed directly within your SAP system by entering the object name VK into the relevant SAP transaction such as SE91 or SE80.
000 - *** Output for conditons **************************************
001 - Select a line
Additional information exists about message 001 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 001 class vk.002 - Enter an item
Additional information exists about message 002 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 002 class vk.003 - There are no more items
Additional information exists about message 003 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 003 class vk.004 - Scales cannot be defined for condition type &
Additional information exists about message 004 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 004 class vk.005 - There are no more conditions
006 - There are no condition records for this selection
007 - Material &1 not defined for sales organization &2 with dist. channel &3
008 - Sales org. &1, dist. channel &2 not maintained for material &3
009 - Material & is marked for deletion
010 - Enter a currency
011 - Currency & is not defined
012 - Division & is not defined
Additional information exists about message 012 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 012 class vk.013 - Distribution channel & is not defined
Additional information exists about message 013 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 013 class vk.014 - Sales organization & is not defined
Additional information exists about message 014 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 014 class vk.015 - Transaction & is not allowed for this application
016 - Table &1 &2 not available
017 - Database table & does not exist
018 - Application & is not defined
019 - Creation category & is not defined
020 - Customer & does not exist
021 - No condition records exist for this selection
022 - Enter a unit of measure
023 - Condition records saved
024 - Table &1 is not defined for use with condition type &2
Additional information exists about message 024 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 024 class vk.025 - The creation of records for condition type & is not defined
026 - No rebate agreement was selected
Additional information exists about message 026 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 026 class vk.027 - Agreement type &1 with category &2 already exists
Additional information exists about message 027 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 027 class vk.028 - Rebate condition & is not defined for this transaction
Additional information exists about message 028 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 028 class vk.029 - Enter a condition type
030 - Customer group & is not defined
031 - Price list type & is not defined
032 - Condition group & is not defined
033 - Product hierarchy & is not defined
034 - Plant & is not defined
035 - &1 falls below the limit &2 in the condition record
036 - &1 exceeds the limit &2 in the condition record
037 - &1 falls below the limit &2 for condition type &3
038 - &1 exceeds the limit &2 for condition type &3
039 - The lower limit is larger than the upper limit
040 - Condition type & is not defined
041 - Enter a condition type
042 - Position the cursor on a valid line
043 - You cannot insert any data before the main condition type &
044 - You cannot delete the main condition type &
045 - Condition type &1 is not in procedure &2 &3 &4
046 - Base &1 &2 must be larger than the preceding value &3 &4
047 - Amount &1 &2 must be smaller than the preceding value &3 &4
048 - Amount &1 &2 must be larger than the preceding value &3 &4
049 - Base &1 &2 must be smaller than the subsequent value &3 &4
050 - Amount &1 &2 must be larger than the subsequent value &3 &4
051 - Amount &1 &2 must be smaller than the subsequent value &3 &4
052 - Usage & is not defined
053 - Purchasing organization & is not defined
054 - Vendor & does not exist
055 - Vendor &1 is not maintained for purchasing organization &2
056 - Material & does not exist
057 - Material &1 is not maintained for plant &2
058 - Condition record number & does not exist
059 - No changes carried out
060 - Usage &1 and application &2 is not defined
061 - There are no access sequences for condition type &
062 - No parameters were entered (RV_GET_CONDITION_TABLES)
063 - Select only one line
064 - Access sequence & is not defined
065 - The condition record entered already exists
066 - Country & is not defined
067 - Internal error: T &1 F &2 I &3
068 - Condition exclusion & is not defined
069 - Unit of measure & is not defined
070 - Unit of measure &1 is not defined for material &2
071 - Currency change from &1 to &2; check the scales
072 - No scales exist
073 - The validity periods do not overlap
074 - Prices cannot be negative
075 - Sales org. &1 and dist.chan. &2 are not fully maintained
076 - Conditions cannot be created in distribution channel &
Additional information exists about message 076 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 076 class vk.077 - Sales org. &1 and division &2 are not sufficiently maintained
078 - Conditions cannot be created in division &
Additional information exists about message 078 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 078 class vk.079 - Scale value &1 falls below limit &2 in the condition record
080 - Scale value &1 exceeds limit &2 in the condition record
081 - Scale value &1 falls below limit &2 for condition type &3
082 - Scale value &1 exceeds limit &2 for condition type &3
083 - Conditions for the selection entered are blocked &
084 - The condition is currently blocked by &
085 - No authorization for &1 for condition type &2
086 - No authorization for &1 for purchasing organization &2
087 - No authorization: &1 for distribution channel &2
088 - No authorization: &1 for distribution channel &2 division &3
089 - No authorization: &1 for sales organization &2
090 - No authorization: &1 for sales org. &2 distribution channel &3
091 - No authorization: &1 for sales org. &2 dist.channel &3 division &4
092 - There is no display report for access sequence &
093 - Responsibility & is not defined
094 - Entry definition for &1 &2 &3 does not exist
095 - You cannot enter units of measure for formulae
096 - Unit & is not a unit of weight
097 - Unit & is not a unit of volume
098 - 'From' date (&1) must come before 'to' date (&2)
099 - Tax indicator &1 is not defined for use with condition type &2
100 - Saving not necessary. No changes were made
101 - Saving not necessary. No data was added
102 - The condition record to be copied does not exist.
103 - The selection of condition records was interrupted.
Additional information exists about message 103 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 103 class vk.104 - The condition is being processed in the current session.
Additional information exists about message 104 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 104 class vk.105 - Material pricing group & is not defined
106 - Only the 'BT' 'I' or 'EQ' 'I' options are allowed
107 - Company code & is not defined
108 - Condition type group & was not processed completely
Additional information exists about message 108 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 108 class vk.109 - Enter an item in every field
110 - No tables exist for the selected, related fields
111 - Pricing report & deleted
112 - Pricing report & does not exist
113 - Lower limit is higher than upper limit
114 - No pricing report to be generated were found
115 - Report & cannot be carried out
116 - Pricing report & cannot be deleted
117 - Enter a condition report
118 - Material listing/exclusion type & is not defined
119 - Determination type & is not defined
120 - Substitution reason & is not defined
121 - Procedure & is not defined
122 - Alternative unit of measure & is not defined
123 - Enter a material
124 - FCODE = & is not defined
125 - Price change defined is not clear
126 - Price change of & % cannot be carried out
127 - No currency specification found for & in TCURR
128 - Payer & is currently being processed
129 - Please enter the required price change
130 - Condition rate has been increased/decreased by &1 &2 (no rounding rule)
Additional information exists about message 130 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 130 class vk.131 - Condition rate after price change = 0
132 - Condition rate after price change is negative
133 - Condition rate after price change is positive
134 - Condition rate after rounding = 0
135 - Condition rate after rounding is negative
136 - Condition rate after rounding is positive
137 - Scale rates after rounding are incorrect
138 - Material &1 was found (reason: &2)
139 - Scale rates incorrect
140 - Upper limit for condition type exceeded
141 - Lower limit for condition record not reached
142 - Lower limit for condition type not reached
143 - Upper limit for condition record exceeded
144 - No exchange rate found for currency entered
145 - Currency & does not exist in table TCURX
146 - Rounding rule & does not exist
147 - Condition rate increased (without rounding rule): &1 &2
Additional information exists about message 147 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 147 class vk.148 - Condition rate after price change is less than 100- %
Additional information exists about message 148 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 148 class vk.149 - Upper limit for condition type in scale rate has been exceeded
Additional information exists about message 149 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 149 class vk.150 - Amount has fallen below lower limit for condition record in scale rate
Additional information exists about message 150 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 150 class vk.151 - Amount has fallen below lower limit for condition type in scale rate
152 - Upper limit for condition record exceeded in scale rate
153 - Prices in scale cannot be negative.
154 - Tax indicator &1 has percentage rate &2
155 - The deletion ind. has been cancelled
156 - The conditions selected have not been marked for deletion
157 - Material &1 found on the basis of entry &2 (reason &3)
Additional information exists about message 157 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 157 class vk.158 - Please position cursor on a key combination
159 - Number range & does not exist for rebate
160 - Number range interval & not defined for internal number assignment
161 - Number range object BONUS does not exist
162 - Rebate agreement & is already being processed
163 - System error blocking agreement
164 - Enter an agreement
165 - Agreement & does not exist
166 - &1 &2 created
167 - &1 &2 changed
168 - &1 &2 deleted
169 - Sales group &1 is not allowed for sales office &2
170 - Sales office &1 is not allowed for sales area &2 &3 &4
171 - Sales office & does not exist
172 - Sales group & does not exist
173 - Sales area &1 &2 &3 does not exist
174 - Rebate recipient & does not exist
175 - Rebate recipient &1 does not exist in sales area &2 &3 &4
176 - Number range interval & not defined for external number assignment
177 - Rebate agreement & does not lie within an external number interval
178 - Rebate agreement & already exists
179 - Number range interval & for rebate does not exist
180 - Payment method &1 is not defined for country &2
181 - Conditions with alternative validity periods have been limited
Additional information exists about message 181 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 181 class vk.182 - Validity period &1 cannot start before the rebate becomes valid &2
Additional information exists about message 182 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 182 class vk.183 - Validity period &1 cannot end after the rebate agreement ends &2
Additional information exists about message 183 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 183 class vk.184 - No authorization for &1 &2 in sales area &3
185 - The volume rebate group & does not exist
186 - Partner function & is not a sales employee
187 - Sales order type & is not assigned to a billing type
Additional information exists about message 187 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 187 class vk.188 - Billing type &1 is not assigned to order type &2
Additional information exists about message 188 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 188 class vk.189 - Sales order type & is not allowed for final settlement
Additional information exists about message 189 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 189 class vk.190 - Sales order type & is not allowed for rebate correction
Additional information exists about message 190 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 190 class vk.191 - Status & is not allowed here
Additional information exists about message 191 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 191 class vk.192 - Condition type & is not defined for rebate agreements
Additional information exists about message 192 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 192 class vk.193 - Program error: entry missing in table &1 for billing items &2 &3
194 - Rebate agreement type & is not defined
Additional information exists about message 194 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 194 class vk.195 - Rebate agreement type & not assigned to sales order type
Additional information exists about message 195 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 195 class vk.196 - A credit memo request was created for settlement
Additional information exists about message 196 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 196 class vk.197 - The credit memo request you created was reset
Additional information exists about message 197 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 197 class vk.198 - Customer & is not entitled to rebate
Additional information exists about message 198 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 198 class vk.199 - Please maintain settlement materials for all conditions
Additional information exists about message 199 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 199 class vk.200 - **** Output for the LV13A function group
201 - INSERT error. Return code &
202 - UPDATE error. Return code &
203 - DELETE error. Return code &
204 - INSERT error Table KONH. Return code &
205 - UPDATE error Table KONH. Return code &
206 - DELETE error Table KONH. Return code &
207 - INSERT error Table KONP. Return code &
208 - UPDATE error Table KONP. Return code &
209 - DELETE error Table KONP. Return code &
210 - INSERT error Table KONM. Return code &
211 - UPDATE error Table KONM. Return code &
212 - DELETE error Table KONM. Return code &
213 - INSERT error Table KONW. Return code &
214 - UPDATE error Table KONW. Return code &
215 - DELETE error Table KONW. Return code &
216 - Loop during posting: Table &
217 - Condition type & is not defined for taxes
218 - ASSIGN error in communication work area (KOMG etc.)
219 - INSERT error KONA (key &1 &2; return code &3)
220 - READ error for update of table KONA (key &1 &2; return code &3)
221 - UPDATE error for table KONA (key &1 &2; return code &3)
222 - DELETE error for table KONA (key &1 &2; return code &3)
223 - The sales figures are possibly not up-to-date for rebate recipient &.
Additional information exists about message 223 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 223 class vk.224 - The customer masters are being processed by another user
225 - Agreement type &1: Condition type group &2 is incomplete
Additional information exists about message 225 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 225 class vk.226 - Error during insert in table KONAIND return code &
227 - Error during update in table KONAIND returncode &
228 - Error during deletion in table KONAIND returncode &
229 - No condition update exists for the items selected
230 - Position the cursor on the existing entry
231 - Rebate agr.independ.of sales vol.requires a fixed amount for calc.type
232 - Accruals cannot be corrected for payments independent of sales volume
233 - Program error: Condition table or condition type does not exist
234 - No procedure was specified for condition record determination
235 - Mark the line(s) to be processed
236 - Mark one line only to be moved
237 - All lines may not be deleted
238 - The cond.type has a reference cond.type - Enter records for cond.type &
Additional information exists about message 238 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 238 class vk.239 - Transaction & is missing in table T180
240 - Region &1 &2 is not defined
241 - Validity periods for condition records exceed the agrmt validity period
242 - Tax ID & cannot be checked (there are several/no tax records)
243 - Define the graduated scales in the condition type
Additional information exists about message 243 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 243 class vk.244 - Billing document selection will be carried out as of document &
245 - Material & has already been entered
246 - From-to date of the arrangement will be adopted for the condition
247 - Error in quantity conversion: Billing document &1 item &2
248 - Interval scales are not defined in supplementary billing
249 - In case of subsequent refund, tables are allowed only once
250 - You have no authorization for the activity requested
Additional information exists about message 250 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 250 class vk.251 - Transportation is not defined for master data
Additional information exists about message 251 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 251 class vk.252 - Order type & is not defined
253 - The agreements are being edited by another user
254 - Screen &1 &2 has been created
255 - Payment data from the agreement will be copied into the conditions
256 - First enter a material
257 - Recall pricing report & for regeneration
258 - Enter an agreement number
259 - Change documents for conditions not yet saved are not possible
260 - *****Condition archiving******************
261 - Select either 'incl' or 'excl' deletion ID
262 - No authorization for usage &1 ; status: &2
263 - During 'live' run, an archive file must be created
264 - No archiving from applications with document check; more than & documents
Additional information exists about message 264 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 264 class vk.265 - Retail promotion & does not exist
266 - Maintain Customizing data (get_customizing_data-Return code &)
267 - Select Archiving Session (Open_for_move Return Code &)
268 - The to-from date will be copied from the retail promotion for the cond.
269 - No document check can be performed for application &
270 - *****Condition Indexes********
271 - No active indexes exist
Additional information exists about message 271 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 271 class vk.272 - This change requires a reorganization of condition indexes.
Additional information exists about message 272 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 272 class vk.273 - There are no condition records available for processing.
274 - System error: Rebate condition records selected using a condition index
275 - Both the license number and the creation date should be maintained
276 - Maintenance of sales promotions and promotions not designed for rebates
277 - Maintenance of payment terms has not been designed for rebates
278 - Condition &1: Error in converting exchange rate from &2 to &3
279 - Incorrect master data for rebate recipient &
280 - Change only in emergency. This table is part of a condition table
Additional information exists about message 280 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 280 class vk.281 - The material & to be found corresponds with the material entered
282 - The date of change & is in the past
283 - The validity period from &1 to &2 is being changed
Additional information exists about message 283 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 283 class vk.284 - For discounted goods, all units of measure should be the same
Additional information exists about message 284 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 284 class vk.285 - The number has already been assigned &1 &2
286 - The quantity must be greater than &
287 - The additional quantity is greater than or equals &
288 - Do not specify additional material with inclusive bonus quantity
289 - Not all the lines transferred have been edited
290 - No vendor selected
291 - No authorization: &1 in sales organization &2, division &3
292 - No authorization : &1 division &2
293 - Ascending scale basis cannot be checked; please check manually
Additional information exists about message 293 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 293 class vk.294 - No default value could be determined for partial payment
Additional information exists about message 294 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 294 class vk.295 - The residence period for archiving must be greater 0 days
296 - Only usage = A can be archived
297 - Please select either final or partial settlement
298 - The reference to sales deal & can only be exploded
299 - Changing the rebate recipient does not affect the condition records
Additional information exists about message 299 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 299 class vk.300 - Error during currency conversion from &1 to &2
301 - Units of measure differ in the condition record and in the statistics
Additional information exists about message 301 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 301 class vk.302 - Error converting quantity from &1 to &2
Additional information exists about message 302 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 302 class vk.303 - Minimum status & for final settlement not yet reached
Additional information exists about message 303 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 303 class vk.304 - Error creating rebate credit memos (see next warning message)
Additional information exists about message 304 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 304 class vk.305 - Error processing agreement &: See log
306 - Errors occurred in & agreements
Additional information exists about message 306 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 306 class vk.307 - Agreement & was already settled. Only display is possible.
Additional information exists about message 307 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 307 class vk.308 - Status cred. memo req. created and final settlement carried out ignored
Additional information exists about message 308 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 308 class vk.309 - Select at least one agreement status
Additional information exists about message 309 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 309 class vk.310 - Position the cursor on an agreement
311 - Status 'Check before releasing' already reached by Agreement &
Additional information exists about message 311 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 311 class vk.312 - Status 'Released' already reached by Agreement &
Additional information exists about message 312 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 312 class vk.313 - Agreement &1 has been set to status &2
314 - Position the cursor on a line containing a credit memo
315 - Agreement to be copied is of a different agreement type &1
Additional information exists about message 315 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 315 class vk.316 - No rebate credit memos exist for Rebate agreement &
317 - Position the cursor on a line with a document
318 - The request for a rebate correction & has been created
319 - Rebate correction not necessary
320 - Condition type & is not a rebate condition type
Additional information exists about message 320 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 320 class vk.321 - Condition type & is not a condition type for taxes
Additional information exists about message 321 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 321 class vk.322 - No condition update from the sales orders exist
Additional information exists about message 322 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 322 class vk.323 - The fixed value date & is in the past
324 - Agreement & is not a rebate agreement
325 - Agreement & Is Not a Promotion
326 - Agreement & Is Not a Sales Deal
327 - Agreement & Is Not a Standard Deal
328 - Agreement & Is Not a Sales Quote
329 - No Records Exist For the Selection Entered
330 - No accumulated billing values exist
Additional information exists about message 330 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 330 class vk.331 - Validity (&1-&2) does not lie within the validity period of the promotion
Additional information exists about message 331 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 331 class vk.332 - Terms of payment & different in promotion
Additional information exists about message 332 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 332 class vk.333 - Value days & different in promotion
Additional information exists about message 333 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 333 class vk.334 - Fixed value date & different in promotion
Additional information exists about message 334 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 334 class vk.335 - Agreement type & cannot be processed using this transaction
Additional information exists about message 335 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 335 class vk.336 - Customer hierarchy & does not exist
Additional information exists about message 336 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 336 class vk.337 - Condition type &1 and table &2 not allowed for group &3
Additional information exists about message 337 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 337 class vk.338 - Condition ( &1 -&2 ) has already been assigned
Additional information exists about message 338 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 338 class vk.339 - Clearing amount is greater than the maximum
340 - Order type & is not allowed for partial rebate settlement
341 - Final settlement is not possible due to open documents (document &1)
342 - Statistics correction is not possible. (There are still open documents.)
343 - Some condition records are blocked: They can only be displayed
344 - Manual payment is not allowed for this agreement type
345 - Manual accruals are not allowed for this agreement type
346 - No authorization: Manual payment
347 - No authorization: Manual accruals
348 - Function not possible: There are open documents relevant for accruals
349 - Fucntion not possible: Manual accruals have already been entered
350 - ******************* Variable View **************************************
351 - Assign overviews
Additional information exists about message 351 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 351 class vk.352 - View & does not exist
353 - Screen &1 &2 already exists
354 - Screen &1 &2 will be created
355 - Screen &1 &2 does not exist
Additional information exists about message 355 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 355 class vk.356 - No condition record for rebate agreement &
Additional information exists about message 356 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 356 class vk.357 - Sales org.&1 with CoCode &2 is different from CoCode &3 in the agreement
358 - PurchOrg &1 with CoCode &2 is different from CoCode &3 in the agreement
Additional information exists about message 358 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 358 class vk.359 - Sales organization & is not defined for rebate
360 - Condition type &1 or condition table &2 are not defined
361 - Customer hierarchy &1 does not exist in sales area &2 &3 &4
362 - Scale exists: Basis &1 &2 must be smaller than the successor &3 &4
363 - Minimum quantity &1 &2 of free goods has not been reached
364 - Unit & is not a unit of distance
365 - No exchange rate type with fixed rates defined for the target currency
Additional information exists about message 365 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 365 class vk.366 - Agreement &1: No fixed rate for conversion from &2 to &3
Additional information exists about message 366 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 366 class vk.367 - Material &1 is already selected as relevant for MRP
Additional information exists about message 367 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 367 class vk.368 - This type of inclusive discount is not possible for purchasing
369 - Too many data fields selected (greater than & bytes)
370 - Texts are not supported for agreement type &1
371 - Texts are not supported for condition type &1
372 - Agreement texts have changed. Save the agreement first
Additional information exists about message 372 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 372 class vk.373 - Program error: Filter is not available
374 - No condition records determined
375 - No condition records available
376 - The field assignment has not yet been made
Additional information exists about message 376 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 376 class vk.377 - Sales activity type & is not defined
378 - This selection is not possible in the inclusive bonus quantity field
379 - Sign differs from default value
Additional information exists about message 379 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 379 class vk.380 - The key date for archiving cannot be a future date
381 - At least one agreement type must be selected for archiving
Additional information exists about message 381 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 381 class vk.382 - Condition records for &1 saved
383 - Choose at least one entry
384 - Select a maximum of one entry
385 - The condition records for the bonus buy have been saved.
386 - The conversion factor is not transferred.
Additional information exists about message 386 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 386 class vk.387 - Condition type &1 does not allow supplementary conditions
Additional information exists about message 387 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 387 class vk.388 - No sales volume to correct for agreement &
389 - The unit of measure could not be changed for this check.
390 - There is no processing status for this release status
391 - Call parameter & for function module & is incomplete
392 - Select exactly one line
393 - Check the fixed value date for the period conditions (not transferred)
Additional information exists about message 393 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 393 class vk.394 - Purchasing group & is not defined
400 - ******* Copying Conditions ************************************
401 - Condition record &1 &2 &3 &4 already exists
402 - Condition record &1 &2 has no rules for field &3 value &4
403 - Field &1 does not exist in table &2
404 - Default rule is only allowed once for key &1 &2 &3
405 - &1 : Attribute of program type and application must be &2 and &3
406 - Condition types &1 and &2 have different condition calculation types
407 - Condition types &1 and &2 have different condition classes
408 - Condition types &1 and &2 have different scale basis IDs
409 - Target and source field must match if tables are identical.
410 - Tables &1 and &2 must have the same number of fields
411 - Tables &1 and &2 cannot differ by more than one field from each other
412 - Based on tables, source and target field will be changed automatically
413 - Condition amounts for condition types &1 and &2 have different signs
414 - Condition types &1 and &2 have different pricing procedures
415 - Copying rules for conditions do not contain &1 &2 entry
416 - Copying rules for condition type do not contain &1 &2 &3 entry
417 - Source and target condition type & have different scale base types
418 - For the selected target table & there are no valid access sequences
419 - The condition type is not defined for copying
420 - Specified condition record key conmbination is not defined
421 - At present there is no copying log
422 - No sequential number &1 for copying table &2
423 - Enter a valid value
424 - Both date fields must either be filled or left blank
425 - Both date fields must be the same as the date fields in &1 &2 agreement
426 - No valid cond.type has been defined in the agreement type for tgt table &
427 - Source and target condition types &1 and &2 have diff. calculation types
428 - Source and target condition types &1 and &2 have different scale bases
429 - Source and target condition types &1 and &2 are diff. for matrix maint.
430 - Object &1 is not provided with characteristic &2
Additional information exists about message 430 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 430 class vk.431 - No test poss. for object &1 with characteristic &2. Please check entry!
Additional information exists about message 431 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 431 class vk.432 - Object &1 not provided with characteristic &2. (Note other fields!)
Additional information exists about message 432 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 432 class vk.433 - Enter at least one material.
Additional information exists about message 433 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 433 class vk.434 - Enter at least one valid material.
Additional information exists about message 434 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 434 class vk.435 - No scale header or items exist for scale basis &1 and scale Id &2
436 - No scale items exist for scale basis &1 and scale Id &2
440 - ******Condition maintenance: Usage A and C ******************************
441 - Function not possible: Manual payment values already maintained
442 - A credit memo request has been created
443 - Value exceeds open accruals. &
444 - Order type & is not allowed for manual accruals
445 - Order type for payment must be entered
446 - Order type for manual accruals must be entered
447 - Condition table does not contain a material number in the key
448 - Condition type & is not used in contract processing
449 - Condition type & has no contract-specific access sequences
450 - No condition types are allowed here
451 - Only item number & can be maintained
452 - You can only have 99 condition supplements
453 - Condition rate increased (with rounding rule &1): &2 &3
454 - Condition rate reduced (without rounding rule): &1 &2
455 - Condition rate reduced (with rounding rule &1): &2 &3
456 - No line items available yet for unsaved conditions
457 - No line items available for conditions without sales organization
458 - Line item creation incorr. for cond. &1 (see long text and next message)
Additional information exists about message 458 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 458 class vk.459 - Validity period &1-&2 for planning could be too long
Additional information exists about message 459 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 459 class vk.460 - Line item creation incorr. for cond. &1 (see long text and next message)
Additional information exists about message 460 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 460 class vk.461 - No planning possible for condition &1 due to end of validity period &2
Additional information exists about message 461 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 461 class vk.462 - Material & cannot be used for free goods
463 - Vendor & does not grant free goods
464 - Proposal of more than 99 condition supplements not possible
465 - Category of purchasing info record & is not intended for free goods
466 - Calendar &1 can not be used for the settlement period
Additional information exists about message 466 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 466 class vk.467 - Partial settlements already exist in the future periods
Additional information exists about message 467 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 467 class vk.468 - Date &1 was changed to the next possible settlement date &2
469 - Partial settlement is not necessary
Additional information exists about message 469 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 469 class vk.470 - Function for conditions with multi-dimensional scales not possible
471 - Release status was changed from &1 to &2
Additional information exists about message 471 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 471 class vk.472 - Release status of all condition records in the agreement was changed
473 - Release status was increased for a condition record
Additional information exists about message 473 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 473 class vk.474 - The release status of the condition record was deleted
475 - Settlement date &1 comes before the start of agreement &2
476 - Settlement date &1 comes after the end of agreement &2
477 - &1 &2 has been created
478 - Date &1 is not a settlement date for settlement period &2
479 - Settlement date & is not at a period end
Additional information exists about message 479 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 479 class vk.480 - Partial settlement is not possible without a settlement date
Additional information exists about message 480 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 480 class vk.481 - No valid settlement date could be determined
Additional information exists about message 481 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 481 class vk.482 - No sales revenues are available
483 - &1 &2 has been changed ( &3 &4 has been created)
484 - Select a line
485 - Calendar &1 for period &2 to &3 can not be used as a settlement period
Additional information exists about message 485 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 485 class vk.486 - Settlement date within settlement period &1 no longer possible
Additional information exists about message 486 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 486 class vk.487 - Calendar &1 may contain enough possible settlement dates
Additional information exists about message 487 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 487 class vk.488 - Status cred. memo req. created and final settlement carried out ignored
Additional information exists about message 488 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 488 class vk.489 - The selected condition record is blocked (display only possible)
490 - Variant & does not exist
491 - Price agreements with same key copied. Save first
492 - Free goods discount cannot be processed at the moment. Save first
493 - Error: Inconsistent scale basis unit of measure in scale group &1
Additional information exists about message 493 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 493 class vk.494 - More than one condition table exists for this key
Additional information exists about message 494 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 494 class vk.495 - Cannot find any records for this key combination
Additional information exists about message 495 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 495 class vk.500 - *** Output for pricing reports ***********************
501 - Item line is too long
Additional information exists about message 501 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 501 class vk.502 - Table & is not defined in Table T681E
503 - The list is longer than 132 characters
504 - Report & cannot be changed
505 - Report & is currently blocked for changes
506 - No changes were made
507 - No screen sequence control data found
508 - Batch input cannot be carried out yet
509 - Session &1 &2 open
510 - Session &1 &2 closed
511 - File & could not be opened
512 - No batch input records exist in file &
513 - First record in file & is not a session record (type 0)
514 - No main record (type 2) was read before the scale record (type 3)
515 - Trans.&1 record &2: Data record has not been assigned record type 2
516 - Session &: first transaction does not begin with a header record (type 1)
517 - Session &1 trans.&2: No transaction code has been transferred
518 - ... Processing has been terminated
519 - Session &1 trans.&2: No condition type has been transferred
520 - Session &1 trans.&2: No condition table has been transferred
521 - Trans.&1 record &2: Data record has not been assigned record type 2
522 - Sess.&1 trans.&2: No main record(type 2) follows the header record(type1)
523 - Session &1 trans.&2 record &3: No key data has been transferred
524 - Session &1 trans.&2 record &3: No validity period has been transferred
525 - Session &: session record contains no session names
526 - Session &: session record contains no client
527 - Session &1: Transferred client &2 is different from the system client &3
528 - Session &: session record contains no user name
529 - Session &1: You cannot use &2 to indicate an 'empty' field
530 - Session &1 trans.&2 record &3: No subsequent field found in table &4
531 - Session &1 trans.&2 record &3: No subsequent screen found in table &4
532 - Session &1 trans.&2 : Transaction &3 is not supported
533 - Session &1 trans.&2 : Data record has not been assigned record type 2
534 - No authorization for customizing pricing reports
535 - Authorization only for displaying customizing for pricing reports
536 - Field &1 does not exist in table &2, &3, or &4
537 - Field &1 already exists in the fixed part of table &2
538 - Pricing report &: Error in entry in TADIR
539 - Condition list & generated
540 - The function 'Create' is not permitted in the SAP S11 system
541 - Trans.& not maintained in screen sequence control
542 - Pricing report &: Error deleting entry in TADIR
543 - There are no condition records for the selection specified
544 - Enter file name
545 - No local currency could be determined for sales organization &1
Additional information exists about message 545 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 545 class vk.546 - No local currency could be determined
547 - No local currency could be determined for purchasing organization &1
548 - The pricing report name entered is invalid
Additional information exists about message 548 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 548 class vk.549 - A pricing report already exists for the name specified
Additional information exists about message 549 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 549 class vk.550 - A program with name &1 already exists
551 - Selection was restricted due to missing authorizations
552 - Condition & cannot be processed with this transaction
553 - Transaction application &1 different to condition list application &2
575 - Error determining rebate-relevant billing documents; unknown field &1
576 - Error determining rebate-relevant billing documents; unknown table &1
577 - Error determining rebate-relevant billing documents; mapping is missing
578 - Field &1 does not exist in table/structure &2
579 - You are not permitted to change the standard mapping
600 - *** Output for Usage B (output control) *********************************
601 - No customer master record exists for partner &
602 - No vendor master record exists for partner &
603 - No communication data has been defined for transmission medium &
604 - This output has not been defined for medium &1 and partner function &2
Additional information exists about message 604 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 604 class vk.605 - No fax number maintained for address number &
606 - Output & is deactivated for automatic proposal
607 - No partner functions exist for partner type &
Additional information exists about message 607 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 607 class vk.608 - The JIT call profile & is not defined
609 - Billing type & is not defined
610 - The purchasing document type & is not specified
650 - *** Messages for Usage H (Batches) ***************
651 - Quantity proposal & does not exist
652 - Class & for storing selection specifications has not been created
653 - Classification is blocked at present
654 - There are no selection options for the specified class
655 - Class & is not valid
656 - Specify the ID for the unit of measure
657 - Multiple classification is not allowed
658 - System error during classification
659 - No authorization for classification
660 - Material & is not handled in batches
661 - Material &1 is not available in plant &2
662 - Class type & does not exist
663 - Class type & is not active
664 - Class & does not exist
665 - Specify a class
666 - Number of splits not allowed because no split is allowed
667 - Movement type & is not defined
668 - Warehouse number & does not exist
669 - Movement type &1 is not defined for warehouse number &2
670 - No application has been transferred
671 - Screen & does not exist
672 - Screen & is not a subscreen
673 - Screen & does not lie within the validity area
674 - CUA status not valid
675 - Material type & has not been defined
676 - Error at reset of selection defaults
677 - Material group & has not been defined
678 - There is no active version of table &
679 - The condition table has been copied from the active version
680 - Sorting sequence & is not available
681 - & is not available as a sorting sequence!
682 - & is not available as a selection class !
683 - Proposed quantity &1 is not allowed for the application &2
700 - *** Output for condition generation ***************************
701 - Table &1: Entry &2 not found
702 - Table &1: Entry &2 &3 not found
703 - Table &1: Entry &2 &3 &4 not found
704 - There are no records for the selection you made.
705 - Report & not found
706 - CUA definition for report & cannot be deleted
707 - No sample program for access in Table T681V (key &)
708 - No sample program for display report in Table T681V (key &)
709 - Activation was interrupted
710 - Correction number from transport is missing
711 - No screens are generated
712 - Error occurred during blocking
713 - The tables are currently being processed. Please try later
714 - Error found in access sequence &1 &2 &3
715 - Table &1 can only be accessed by application &2 (&3)
716 - Please wait. Data base is being converted
717 - A data base table was created for Table &
718 - Unable to create a data base table for Table &
719 - Transport utility will be started for &1 &2
720 - Correction & was updated
721 - Activation blocked for 1.2 development (SWISHER 2283)
722 - Text pool for program &1 does not exist in language &2
723 - No documentation available for program &1 in language &2
724 - Description of table &1 missing in language &2
725 - A data base table exists already
726 - Transport utility has been started
727 - No entries found for the transport
728 - No entries found for the transport in the customer area
729 - & is an SAP standard table. It cannot be deleted.
730 - Object &1 &2 &3 is blocked for transportation
731 - Index &1 for table &2 has been created
732 - Fields for index &1-&2 could not be created
733 - A batch job has been created
734 - Pricing tables cannot be changed in the delivery system
Additional information exists about message 734 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 734 class vk.735 - Program & has been run successfully
736 - Program & did not run successfully
737 - Dictionary table & could not be deleted
738 - Delete dictionary table & with transaction SE11
739 - Database index &1 has been created for table &2
740 - System error: Data base index &1 cannot be created for table &2
741 - There are no entries in the log
742 - The fields for index &1-&2 could not be read
743 - Header for index &1-&2 could not be saved
744 - Dictionary table & was deleted
745 - Access & not defined
746 - Technical characteristics missing for table &
747 - Technical characteristics could not be created for table &
748 - Reports and screens for table &1 &2 marked for generation
Additional information exists about message 748 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 748 class vk.749 - Access &1 &2 &3 &4 contains no fields
750 - The system successfully created the IDoc for the conditions selected
751 - The system could not create the IDoc for the conditions selected
752 - IDoc creation only possible for pricing and rebate
753 - Error in billing document & (see next error)
Additional information exists about message 753 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 753 class vk.754 - Please execute this report online-Background job scheduled automatically
Additional information exists about message 754 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 754 class vk.755 - Select lower val. for 'Max.runtime' or higher val. for 'Continue every'
756 - Create condition table with validity period (see long text)
Additional information exists about message 756 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 756 class vk.757 - Cond. records for condition type &1 are redetermined (subs. settlement)
Additional information exists about message 757 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 757 class vk.758 - Cond. records for condition type &1 can only be entered via agreement
Additional information exists about message 758 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 758 class vk.759 - System error: Report & could not be generated
760 - Access sequence &1 &2 &3 was generated online
769 - Usage &1 is reserved only
Additional information exists about message 769 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 769 class vk.770 - Switch: Field &2 cannot be used (table &1)
Additional information exists about message 770 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 770 class vk.771 - Switch: Condition table &1 cannot be changed
772 - Switch: Condition table &1 cannot be used
Additional information exists about message 772 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 772 class vk.773 - Switch: Report &1 will not be generated
774 - Switch: Condition table &1 was deactivated
775 - Switch: Condition table &1 was activated
776 - Switch: Function is not available
Additional information exists about message 776 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 776 class vk.777 - Feature not available in enhanced rebate
Additional information exists about message 777 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 777 class vk.778 - Field &1 is not a valid filter criterion; processing cancelled
779 - The sales volume for the agreements are not current
Additional information exists about message 779 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 779 class vk.780 - The sales volume for agreement & is not current
Additional information exists about message 780 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 780 class vk.781 - No accruals correction possible
Additional information exists about message 781 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 781 class vk.782 - Rebate credit memo down payment request: &
783 - Status: &1 &2
784 - The rebate agreement is currently being processed
785 - Document display is only possible in the scope of statement ' '
Additional information exists about message 785 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 785 class vk.786 - There is no sales volume for agreement &
Additional information exists about message 786 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 786 class vk.787 - Settlement document &1 created
790 - ***Output Check Conditions**********************************************
791 - Select an application
792 - An error occured when checking the number range object 'KONH'
Additional information exists about message 792 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 792 class vk.793 - Define a check scope
Additional information exists about message 793 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 793 class vk.794 - No condition tables exist for the specified selection
795 - KONH and KONP also checked
Additional information exists about message 795 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 795 class vk.796 - The variable key can not be formatted
Additional information exists about message 796 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 796 class vk.797 - No application could be determined for the specified selection
798 - No condition record can be displayed for this line
799 - No variable key available to be displayed
800 - *** Output for condition generation ***************************
801 - Select an allowed field
802 - Mark the 'with validity period' field
803 - System error: too many access sequences - report suffix overflow
804 - Unable to transfer fields from the reference table
805 - Table & has been saved
806 - Report & has a syntax error
807 - %A No display authorization for usage &1 application &2
808 - System error: Unable to read fields from table &
809 - Select at least one object
810 - %A No maintenance authorization for usage &1 application &2
811 - & already selected
812 - Place the cursor on an 'allowed field'
813 - Place the cursor on a 'selected field'
814 - Select a line containing an entry
815 - Select end of block
816 - The block is marked
817 - No block has been marked
818 - Place the cursor on the line before the one in which you want to add data
819 - Condition & has been generated
820 - Select a data dictionary field
821 - System cannot read the data elements from Table &
822 - Deletion indicator for condition record has been set
Additional information exists about message 822 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 822 class vk.823 - Text display only possible for line fields
824 - Mark only one field as 'text'
825 - Condition & has been deleted
826 - System cannot read the table header for table &
827 - Table & already exists
828 - Enter a table between &1 and &2
Additional information exists about message 828 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 828 class vk.829 - Condition record is deleted when saving
Additional information exists about message 829 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 829 class vk.830 - Screen & not found
831 - Correction & is currently being processed
832 - System error: System cannot complete correction &1 with &2
833 - Table & is not empty. Delete all records first
834 - Table deleter started
835 - Table & successfully deleted
836 - Table &1 referenced for access sequence &2 &3 &4
837 - Enqueue object generator has been started
838 - Lock object &1 for table &2 has been generated
839 - Locking object & not found
840 - ************ Generation of conditions / Log *************
841 - Detail log is not defined
842 - Generated object is not defined
843 - There are no tables for the selection made
844 - Transportation of customer tables out of an SAP System is not allowed
845 - Lock object &1 for table &2 was deleted
846 - Access sequences are blocked at present
847 - Enter a screen no. betw. 3012 and 3020 (not 3010, 3011) or 3501 and 3520.
848 - Field &1 is not character-type
Additional information exists about message 848 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 848 class vk.850 - Unable to save report &
851 - Report & saved
852 - System error: inconsistencies were found in the internal tables
853 - Too many fields selected (larger than & bytes)
854 - Table & is already defined with the same fields
855 - Message from the Data Dictionary:
856 - Table & activated
857 - Report & generated
858 - Screen &1 &2 generated
859 - Foreign key cannot be created for the selected field &1-&2
Additional information exists about message 859 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 859 class vk.860 - Screen &1 &2 saved
861 - System error: maximum number of tables (&) reached
Additional information exists about message 861 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 861 class vk.862 - System error: system cannot read the structure for table &
863 - System error: sample report & is not defined
864 - System error: Field &1 in table &2 not found
865 - Select at least one field
866 - System error: internal syntax error in line &
867 - Data Dictionary blocked at the moment
868 - System error: syntax error in screen &
869 - System error: field & in screen not found
870 - System error: Table &1, entry &2 missing
871 - System error: Table &1, entry &2 &3 missing
872 - System error: Table &1, entry &2 &3 &4 missing
873 - Access sequence &1 &2 &3 marked for generation
Additional information exists about message 873 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 873 class vk.874 - Not enough space for a one line gap in the screen
875 - System error: Field &1-&2 not defined in data dictionary
876 - System error: Field &1-&2 not suitable for screen
877 - Documentation for report &1 written in language &2
878 - Documentation cannot be written for report &1 in language &2
879 - System error: screen & not defined
880 - Table generator started
881 - Access sequences have already been activated
882 - Coding generator started
883 - Text pool for report &1 written in language &2
884 - Screen generator started
885 - Error when preparing list processing
886 - Text pool for report &1 cannot be written in language &2
887 - System error: system cannot save table header for &
888 - System error: system cannot save the fields for table &
889 - System error: System cannot save foreign key for field &1-&2
890 - Text field for field & not found
891 - Not enough space for the screen field &1-&2
892 - For field &1 only &2 of &3 places displayed
893 - Access sequence &1 &2 &3 not defined
894 - System error: system cannot generate screen &
895 - System error: System cannot generate lock object &1 for table &2
896 - System error: System cannot create entry &2 in table &1
897 - System error: System cannot create entry &2 &3 in table &1
898 - System error: System cannot create entry &2 &3 &4 in table &1
899 - Screen sequence control: Entry missing in table &1 for language &2
Search for further information about these or an SAP related objects