UPB SAP Message class BPS: Meldungen der Bilanzplanung
UPB is a standard message class available within your SAP system (depending on your version and release level). Below is a list of all the messages available for within this class and a link to any long text associated with each message. These messages are very simple to use and can be implemented into your ABAP code using the MESSAGE statement and the following syntax.
MESSAGE I001(UPB).
Note the value "I" represents an information messsage but can be replaced with E for error, W for warning, S for Status/Success, A for Abend/Termination and X for exit which does not display a message and causes a runtime error. Click here for more information about SAP Messages.
Messages can also contain the & symbol, this means custom values can be added to the message when it is displayed, this is done using the WITH statement
MESSAGE I001(UPB) with ld_field1.
Message class details can be viewed directly within your SAP system by entering the object name UPB into the relevant SAP transaction such as SE91 or SE80.
001 - &1 &2 &3 &4
002 - Area was not found - set first
003 - DDIC error
004 - Error when reading the field catalog
005 - Error in ALV
006 - Database access error
007 - Error in internal processing
033 - For &1, planning area &2 is set
050 - Error in target system &1
051 - Error in RFC for destination &1
052 - Select a line
060 - Settings were deleted for user &1
061 - Settings were deleted for all users
070 - Field &1 must be deleted from the parameter group
080 - * Accumulate balances
081 - Complete the selection of fiscal year variant and year
Additional information exists about message 081 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 081 class upb.082 - Restrict the selected time characteristic to an interval
083 - Enter a package selection for the calendar year
100 - This function is blocked at present.
101 - Structure &1 could not be read.
Additional information exists about message 101 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 101 class upb.120 - Characteristic &4 (&3) is not restricted to a single value
Additional information exists about message 120 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 120 class upb.121 - Planning function type &1 is not supported
122 - Characteristic &4 (&3) is not restricted to a single value
Additional information exists about message 122 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 122 class upb.139 - No selection condition is entered for time characteristic &1 (&2)
Additional information exists about message 139 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 139 class upb.140 - No internal interest rate could be determined
Additional information exists about message 140 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 140 class upb.141 - No unique internal interest rate could be determined
Additional information exists about message 141 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 141 class upb.142 - A negative internal interest rate was determined
Additional information exists about message 142 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 142 class upb.143 - An internal error occurred when calculating the internal interest rate
144 - Empty
149 - At least one source posting is incompletely maintained for field &1
150 - No target update maintained for &3 &1
Additional information exists about message 150 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 150 class upb.151 - &3 &1 occurs as source and as target
Additional information exists about message 151 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 151 class upb.152 - No source update maintained for &3 &1
Additional information exists about message 152 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 152 class upb.153 - &3 &1 is maintained more than once as a source
Additional information exists about message 153 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 153 class upb.154 - Sum-of-the-years-digits mthd of depr. only supported in yearly per. split
155 - No percentage is entered for yearly depreciation
156 - No income statement item is entered for depreciation
157 - No financial statement item is entered for depreciation
158 - No item is entered for revenues
159 - An upper limit, but no lower limit is entered for the range
160 - The field key figure name is not maintained as condition field.
Additional information exists about message 160 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 160 class upb.161 - No item is entered for expenditure
162 - No statisical item is entered
163 - No conventional interest rate is entered
164 - No item is entered for cash flow
165 - Only preceding rows of key figure scheme are allowed as reference rows
Additional information exists about message 165 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 165 class upb.166 - No evaluation element is specified in row &1 of key figure scheme
167 - No reference element is specified in row &1 of key figure scheme
168 - No reference row is specified in row &1 of key figure scheme
Additional information exists about message 168 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 168 class upb.169 - No reference level is specified in row &1 of key figure scheme
Additional information exists about message 169 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 169 class upb.170 - Items for input and output are the same
Additional information exists about message 170 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 170 class upb.171 - Items for output are the same
Additional information exists about message 171 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 171 class upb.200 - Component &1 is not contained in current data record
Additional information exists about message 200 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 200 class upb.201 - Depreciation method &1 is not supported
210 - No basic characteristic could be found for characteristic &1
300 - Technical name is already assigned for the planning folder
301 - Technical name does not correspond to the naming convention
302 - Layout of planning object &1 contains open header characteristics
Additional information exists about message 302 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 302 class upb.303 - Planning folder is consistent
304 - Planning folder was not saved
305 - Planning folder was saved
306 - Only planning functions and sequences could be executed
307 - Planning object is not available in planning folder
308 - Only layouts can be displayed
309 - Planning folder does not exist
310 - Select a planning folder
311 - Planning book name is already assigned
312 - Layout &1 contains more than one function for exec. before layout output
Additional information exists about message 312 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 312 class upb.313 - Layout &1 contains more than one function for execution after entry
Additional information exists about message 313 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 313 class upb.314 - Global planning functions can only be used as 'pushbutton'
315 - The last one is saved as the default folder
316 - Folder &1 is set as default folder
Additional information exists about message 316 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 316 class upb.317 - Sorting the planning folders was saved
318 - Undo &1(&2)
319 - &1(&2) was undone
320 - There are no planning folders
321 - Technical name &1 has already been used
322 - There is no comment for planning folder &1
323 - Undo automatic planning function for layout &1(&2)
324 - Automatic planning function for layout &1(&2) was undone
325 - Messages are available in the log (F9)
Additional information exists about message 325 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 325 class upb.326 - &1(&2) was executed
327 - Automatic function '&1(&2)' was executed for layout '&3(&4)'
328 - Data was saved
329 - All specific settings of folder &1 were undone
330 - Error in &1, global planning sequence &2 is not consistent
331 - Error in &1, package &2 is incorrect or deleted
332 - Error in &1, parameter group &2 is no longer available
333 - Error in &1, layout &2 is incorrect or deleted
334 - Error in &1, planning sequence &2 is not consistent
335 - Error in &1, planning function &2 is no longer available
336 - Error in &1, level &2 is incorrect or deleted
337 - Error in &1, header characteristic &2 is not unique in layout
Additional information exists about message 337 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 337 class upb.338 - Variable &1 (area &2) is no longer available
339 - Variable &1 (area &2) is not necessarily always unique
Additional information exists about message 339 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 339 class upb.340 - In level &3 (object &4) variable &1 (area &2) is missing
Additional information exists about message 340 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 340 class upb.341 - Object &4, layout &3: Variable &1 available in other layouts is missing
Additional information exists about message 341 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 341 class upb.342 - MS Excel is set up as display tool for layout &2 in &1
Additional information exists about message 342 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 342 class upb.343 - Characteristic &3 is not clearly restricted in the planning folder
Additional information exists about message 343 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 343 class upb.344 - Value &1 of variables &2 is not contained in area &3
345 - Planning folder contains no input layout
346 - Planning folder contains no ouput layout
347 - Planning folder contains &1 layouts. A maximum of &2 are possible
348 - Planning folder was not saved
349 - Planning folder is incorrect, not possible to save
350 - Planning folder is not consistent
351 - Executing the planning folder is terminated
352 - Variable &1 is already used in the planning folder
353 - Selection of variables in the folder is complete
354 - Characteristic &3 of variable &1(&2) does not appear in any used level
355 - Selection of &1 is invalid
356 - Folder &1 cannot be executed in the Web. Export not possible
Additional information exists about message 356 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 356 class upb.357 - Folder &1 must be saved first
358 - No messages exist
359 - Error in &1:
360 - Make an entry in all required fields
361 - In &1 and &2, characteristic &3 is selected differently in header area
362 - Characteristic &1 (area &2) is not used in all header areas
363 - Select a package and a parameter group
Additional information exists about message 363 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 363 class upb.364 - Parameter group does not match the package selected
Additional information exists about message 364 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 364 class upb.365 - No valid target entry is selected
Additional information exists about message 365 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 365 class upb.366 - Global planning sequences can cause cross-area changes
Additional information exists about message 366 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 366 class upb.367 - A layout can only be moved into the input or output folder
368 - A function cannot be used as a layout
369 - Planning environment cannot be started
370 - You have no authorization to display planning folder &1
371 - You have no authorization to change planning folder &1
372 - You have no authorization to execute planning folder &1
373 - You have no transport authorization for planning folder &1
374 - Authorization check could not be executed
375 - This function is only executable in change mode
376 - No objects can be selected in set profile &1
Additional information exists about message 376 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 376 class upb.377 - Last planning function was undone
378 - Export was not performed
379 - Web interface &1 was created on the basis of folder &2
380 - Reconversion is not always possible in an internal format
381 - Select a planning folder
382 - Search was unsuccessful
383 - Enter a valid folder type
384 - Select at least one line first
385 - You do not have any authorization to display planning folders
386 - You do not have any authorization to change planning folders
387 - You do not have any authorization to execute planning folders
388 - You do not have any transport authorization for planning folders
389 - Operation cannot be executed here
Additional information exists about message 389 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 389 class upb.390 - Application can be a maximum of 15 characters long and start with A..Z
391 - No planning folders were yet created for planning profile &1
392 - No planning folders were yet created for main planning area &1
Additional information exists about message 392 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 392 class upb.393 - Planning folder &1 is not yet translated into language &2
394 - Command &1 does not exist
395 - Planning folder &1 is not available
396 - Planning folder name &1 is already assigned
397 - Enter a planning folder name
398 - Area &1 is not available
399 - Data could not be saved
400 - Characteristic &1 does not exist in the planning level
Additional information exists about message 400 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 400 class upb.401 - Key figure &1 does not exist in the planning level
Additional information exists about message 401 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 401 class upb.402 - Field &1 must be selected as a condition field
403 - Specify &1
450 - No transaction data is available to planning area &1
451 - Characteristic &1 is not contained in planning area &2
452 - InfoObject &1 is not contained in the planning area
453 - InfoObject &1 was changed (other technical attributes)
454 - InfoObject &1 is not contained in the delivered planning area
455 - No master data is available for characteristic &1
456 - Characteristic &1 is not contained in the planning area
457 - Characteristic &1 was changed (other technical attributes)
458 - Parameter I_MODE must be set to 'N'ew or 'A'll
459 - Characteristic &1 was changed (other componding)
460 - Characteristic &1 was changed (other attributes)
461 - No metadata is available for InfoCube &1
462 - No data found
463 - Hierarchy &1 on characteristic &2 is not available
464 - &2 data records were successfully imported for planning area &1
465 - &2 characteristic values were successfully imported for characteristic &1
466 - Hierarchy &1 on characteristic &2 was successfully imported
467 - &2 data records were successfully exported for planning area &1
468 - &2 characteristic values were successfully exported for characteristic &1
469 - Hierarchy &1 on characteristic &2 was successfully exported
470 - Data on planning area &1 not transferred at user's request
471 - Transport entries were generated for the data on planning area &1
472 - Transport entries were generated for the master data on characteristic &1
473 - Transport entries were generated for hierarchy &1 on characteristic &2
500 - Application &1 is unknown
502 - Error when deleting entries in table &1
503 - Error when inserting entries in table &1
504 - For application &1, no attributes area available for area &2
505 - No planning area is set for application &1
506 - For application &1, no planning area is set for user &2
507 - An empty table cannot be processed
508 - Planning area &1 is not contained in the profile of user &2
Additional information exists about message 508 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 508 class upb.525 - Errors in combination check
550 - No further ALV instance could be generated (max. &1).
570 - No hierarchies available
605 - Plan function does not exist.
606 - Target must be different from source.
607 - The sum of the distribution percentages does not amount to 100%
Additional information exists about message 607 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 607 class upb.608 - At least one percentage is negative or 0.
609 - Field key figure name is not selected for condition fields
Additional information exists about message 609 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 609 class upb.610 - Error in package selection for time characteristic.
611 - Calculated time characteristic not in interval of package selection.
613 - Characteristic value is invalid
614 - Internal inconsistency for calculation characteristic
616 - Key figure name cannot be removed as field for conditions
650 - No objects were selected
Additional information exists about message 650 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 650 class upb.651 - Display processing type: No transport request was generated
Additional information exists about message 651 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 651 class upb.652 - For planning area &1, &2 data records were found
653 - No master data could be selected for characteristic &1
Additional information exists about message 653 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 653 class upb.654 - For characteristic &1, &2 characteristic values were found in language &3
655 - First select a planning area
656 - Display processing type: No data was imported
Additional information exists about message 656 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 656 class upb.657 - Import completed successfully
658 - Error during import. See long text
Additional information exists about message 658 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 658 class upb.670 - Inconsistency in Customizing of Planning Function &1 (-> Long Text)
Additional information exists about message 670 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 670 class upb.671 - Error in internal processing. No further processing possible
672 - Error in generated report &1. No further processing possible
700 - Maintain row completely
701 - Application &1 has no subclass &2 (maintain V_UPB_IA_SUBCL)
702 - Enter a language
710 - Characteristic value &1 (&2) outside selection of planning level
Additional information exists about message 710 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 710 class upb.711 - No value is entered for characteristic &1 in questionnaire
712 - Planning level &2 area &1 was changed. Not possible to regenerate
713 - Characteristic value &3 (&2) not in range of variables &1
714 - Data could not be saved
715 - Class regenerated (level &2 area &1). Adjust survey
Additional information exists about message 715 to provide the user with a more detailed description of the issue and what might be the cause... See long description for message 715 class upb.730 - Enter a sender structure
731 - Calendar day selection invalid
732 - Enter a time characteristic
733 - Field &1 does not exist in structure
734 - Error in &1: &2; &3
735 - Company code is empty
736 - Date is empty
737 - Some time characteristics must stay in field list
750 - Class for planning level &2 of area &1 was generated
751 - Class for planning level &2 of area &1 was not generated
752 - Class not transportable, not generated yet (area &1, level &2)
753 - Class for planning level &2 of area &1 was deleted
770 - Select at least one planning application or area
771 - Either select the local system or a RFC destination
772 - You have no authorization to change the planning area
773 - BW installation has changed for &1 planning areas
800 - Automatic planning function '&1(&2)' was executed
801 - &1&2&3&4
802 - &1 is not in area of lead columns from &2/&3/&4
803 - XML Customizing is incorrect (parser error: &1)
804 - Element &1 is missing in Customizing
810 - Customizing of planning folder &1 not possible
811 - Planning folder &1 does not exist as preceding list entry
812 - Planning folders of application class &1 cannot contain any variables
813 - Area &1 cannot be used
814 - Folder type &1 cannot be used in application class &2
815 - Incorrect names for application class &1, planning folder &2
816 - Customizing of folder was adjusted
817 - Incorrect name for planning object &1
818 - Planning object is missing
819 - Error in Customizing of planning object &1
Search for further information about these or an SAP related objects