QABWR SAP (Interface table with data for valuation procedures) Structure details
Dictionary Type: Structure
Description: Interface table with data for valuation procedures
Description: Interface table with data for valuation procedures
Structure field list including key, data, relationships and ABAP select examples
QABWR is a standard SAP Structure so does not store data like a database table does. It can be used to define the fields of other actual tables or to process "Interface table with data for valuation procedures" Information within sap ABAP programs.
This is done by declaring abap internal tables, work areas or database tables based on this Structure. These can then be used to store and process the required data appropriately.
i.e. DATA: wa_QABWR TYPE QABWR.
The QABWR table consists of various fields, each holding specific information or linking keys about Interface table with data for valuation procedures data available in SAP. These include VORGLFNR (Current Node Number from Order Counter APLZL), PLNFL (Sequence), VORNR (Operation/Activity Number), MERKNR (Inspection Characteristic Number).. See below for full list along with technical details, documentation, text table, check tables, foreign key relationships, conversion routines, relevant tcodes and example ABAP select code etc. .
Delivery Class:Display/Maintenance via tcode SM30: Display/Maintenance Allowed but with Restrictions
SAP enhancement categories: Can be enhanced (character-type or numeric)
SAP QABWR structure fields - Full list of fields found in SAP data dictionary
| Field | Description | Data Element | Data Type | length (Dec) | Check table | Conversion Routine | Domain Name | MemoryID | SHLP |
| PRUEFLOS | Inspection Lot Number | QPLOS | NUMC | 12 | Assigned to domain | QPLOS | QLS | QALS | |
| VORGLFNR | Current Node Number from Order Counter APLZL | QLFNKN | NUMC | 8 | KNTNR | ||||
| PLNFL | Sequence | PLNFOLGE | CHAR | 6 | ALPHA | PLNFOLGE | |||
| VORNR | Operation/Activity Number | VORNR | CHAR | 4 | NUMCV | VORNR | VGN | ||
| MERKNR | Inspection Characteristic Number | QMERKNRP | NUMC | 4 | QMERKNRP | ||||
| KURZTEXT | Short Text for the Inspection Characteristic | QMKKURZTXT | CHAR | 40 | QKURZTEXT | ||||
| PROBENR | Sample Number | QPROBENR | NUMC | 6 | Assigned to domain | QPROBENR | QPO | ||
| QRKNR | Control Chart Number | QQRKNR | NUMC | 12 | Assigned to domain | QQRKNR | |||
| STELLEN | Number of Places to the Right of a Decimal Point (Accuracy) | QSTELLEN | INT1 | 3 | QSTELLEN | ||||
| WERK | Plant | WERKS_D | CHAR | 4 | Assigned to domain | WERKS | WRK | H_T001W_C | |
| MERKGEW | Weighting of the Characteristic | QMERKGEW | CHAR | 2 | Assigned to domain | QMERKKLAS | |||
| FEHLKLAS | Defect Class | QFEHLKLAS | CHAR | 2 | Assigned to domain | QFEHLKLAS | |||
| DYNPCALL | Process Defect Class as Default Value in a Window | QDYNPCALL | CHAR | 1 | QKZ | ||||
| SOLLSTPUMF | Sample Size that Has to Be Inspected for a Characteristic | QGESUMF | INT4 | 10 | QANZAHL4 | ||||
| ANNAHMEZ | Acceptance Number | QANNAHMEZ | INT2 | 5 | QINT2NEG | ||||
| RUECKWEZ | Rejection Number | QRUECKWEZ | INT2 | 5 | QANZAHL2 | ||||
| KFAKTORNI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| KFAKTOR | K-Factor for a Variable Inspection | QKFAKTOR | FLTP | 16(16) | QKFAKTOR | ||||
| TOLUNNI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| TOLERANZUN | Lower Tolerance Limit | QTOLUN | FLTP | 16(16) | QSOLLWERTE | ||||
| TOLOBNI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| TOLERANZOB | Upper Specification Limit | QTOLOB | FLTP | 16(16) | QSOLLWERTE | ||||
| ANZWERTO | Number of Measured Values Above the Tolerance Range | QANZWERTO4 | INT4 | 10 | QANZAHL4 | ||||
| ANZWERTU | Number of Measured Values Below the Tolerance Range | QANZWERTU4 | INT4 | 10 | QANZAHL4 | ||||
| ANZWERTG | Number of Inspected Sample Units | QANZWERTG4 | INT4 | 10 | QANZAHL4 | ||||
| ANZFEHLEH | Number of Nonconforming Sample Units | QANZFEHEH4 | INT4 | 10 | QANZAHL4 | ||||
| ANZFEHLER | Number of Defects Found | QANZFEHL4 | INT4 | 10 | QANZAHL4 | ||||
| MITTELWNI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| STDABWNI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| MOMENT3NI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| MOMENT4NI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| ANTEILONI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| ANTEILUNI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| MAXWERTNI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| MINWERTNI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| MITTELWERT | Arithmetic Mean of Valid Measured Values | QMITTELWRT | FLTP | 16(16) | QSTATWERT | ||||
| STDABW | Standard Deviation of Valid Measured Values | QSTDAW | FLTP | 16(16) | QSTATWERT | ||||
| MOMENT3 | Third Central Moment of Valid Measured Values | QMOMENT3 | FLTP | 16(16) | QSTATWERT | ||||
| MOMENT4 | Fourth Central Moment of Valid Measured Values | QMOMENT4 | FLTP | 16(16) | QSTATWERT | ||||
| ANTEILO | Estimated Fraction Above the Tolerance Range | QANTEILO | FLTP | 16(16) | QSTATWERT | ||||
| ANTEILU | Estimated Fraction Below the Tolerance Range | QANTEILU | FLTP | 16(16) | QSTATWERT | ||||
| MAXWERT | Maximum Value of the Valid Measured Values | QMAXWERT | FLTP | 16(16) | QSTATWERT | ||||
| MINWERT | Minimum Value of the Valid Measured Values | QMINWERT | FLTP | 16(16) | QSTATWERT | ||||
| KATALGART | Catalog Type of Assigned Code Group or Selected Set | QKATAUSW | CHAR | 1 | Assigned to domain | QKATART | QKT | ||
| AUSWMENGE | Assigned Code Group or Selected Set | QCGRAUSW | CHAR | 8 | QCGRAUSW | ||||
| AUSWMGWRK | Plant of the Assigned Selected Set | QWERKAUSW | CHAR | 4 | Assigned to domain | WERKS | WRK | ||
| AUSWVERS | Version Number | QVERSNR | CHAR | 6 | ALPHA | QVERSNR | |||
| GRUPPE | Code Group | QCODEGRP | CHAR | 8 | Assigned to domain | QCODEGRP | CGP | ||
| CODE | Code | QCODE | CHAR | 4 | Assigned to domain | QCODE | QCODE | ||
| VERSION | Version Number | QVERSNR | CHAR | 6 | ALPHA | QVERSNR | |||
| MBEWERTG | Inspection Result Valuation | QMBEWERTG | CHAR | 1 | QEEBEWERTG | ||||
| DBEWERTG | Valuation of the Characteristic for Dynamic Modification | QDBEWERTG | CHAR | 1 | QEEBEWERTG | ||||
| DUMMY10 | Text Line for Additional Information | QTXT10 | CHAR | 10 | QTXT10 | ||||
| DUMMY20 | Text Line for Additional Information | QTXT20 | CHAR | 20 | QTXT20 | ||||
| DUMMY40 | Text Line for Additional Information | QTXT40 | CHAR | 40 | QTXT40 | ||||
| CODEGR9U | Code Group | QCODEGRP | CHAR | 8 | Assigned to domain | QCODEGRP | CGP | ||
| CODE9U | Defect Code for Rejection at Lower Specification Limit | QCODEU | CHAR | 4 | Assigned to domain | QCODE | |||
| CODEVR9U | Version Number | QVERSNR | CHAR | 6 | ALPHA | QVERSNR | |||
| CODEGR9O | Code Group | QCODEGRP | CHAR | 8 | Assigned to domain | QCODEGRP | CGP | ||
| CODE9O | Defect Code for Rejection at Upper Specification Limit | QCODEO | CHAR | 4 | Assigned to domain | QCODE | |||
| CODEVR9O | Version Number | QVERSNR | CHAR | 6 | ALPHA | QVERSNR | |||
| CODEGRQUAL | Defect Code Group for General Rejection | QCODEGRPQL | CHAR | 8 | Assigned to domain | QCODEGRP | CGP | ||
| CODEQUAL | Defect Code for Rejection: General | QCODEQL | CHAR | 4 | Assigned to domain | QCODE | |||
| QUANTITAT | Quantitative Characteristic | QKZQUNMK | CHAR | 1 | QKZ | ||||
| MESSWERTE | Measured Values Must Be Recorded | QKZQUMK | CHAR | 1 | QKZ | ||||
| PRUEFKAT | Reference to Characteristic Attribute Required | QKZPKAT | CHAR | 1 | QKZ | ||||
| BEWFHLZHL | Recording the Number of Defects | QBFHLZHL | CHAR | 1 | QKZ | ||||
| ESTUKZ | Recording Type | QESTUKZ | CHAR | 1 | QESTUKZ | ||||
| SOLLWERT | Target Value for a Quantitative Characteristic | QSOLLWERTE | FLTP | 16(16) | QSOLLWERTE | ||||
| SOLLWNI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| SOLLSTPANZ | Number of Planned Partial Samples | QSOSTPANZ | INT2 | 5 | QANZAHL2 | ||||
| ISTSTPANZ | Number of Partial Samples for the Characteristic | QANZSTIPRO | INT2 | 5 | QANZAHL2 | ||||
| GUELSTPANZ | Number of Valid Partial Samples | QGUELSTPAN | INT2 | 5 | QANZAHL2 | ||||
| STEUERKZ | Cntrl Indicator String for Insp. Char./Master Insp. Char. | QMKCONTROL | CHAR | 30 | QMKCONTROL | ||||
| GRENZEOB1 | First Upper Specification Limit | QGRENZOB1 | FLTP | 16(16) | QSOLLWERTE | ||||
| GRENZOB1NI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| GRENZEUN1 | First Lower Specification Limit | QGRENZUN1 | FLTP | 16(16) | QSOLLWERTE | ||||
| GRENZUN1NI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| GRENZEOB2 | Second Upper Specification Limit | QGRENZOB2 | FLTP | 16(16) | QSOLLWERTE | ||||
| GRENZOB2NI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| GRENZEUN2 | Second Lower Specification Limit | QGRENZUN2 | FLTP | 16(16) | QSOLLWERTE | ||||
| GRENZUN2NI | Value Not Initial if Set | QNINITIAL | CHAR | 1 | QKZ | ||||
| SCHLCODE | Key Code | QSTSCHL | CHAR | 4 | CHAR4 | ||||
| PRUEFQUALI | Inspector Qualification | QPRQUALIF | CHAR | 5 | Assigned to domain | QPRQUALIF | |||
| FORMEL1 | Formula Field | QFORMEL | CHAR | 60 | QFORMEL | ||||
| FORMEL2 | Formula Field | QFORMEL | CHAR | 60 | QFORMEL | ||||
| FORMELSL | Check and Calculate Formula in QM | QFORMELSL | CHAR | 1 | QFORMELSL | ||||
| PZLFH | Assigned Test Equipment | QPZLFH | NUMC | 8 | PZLFH | ||||
| KATAB2 | Catalog Entry Is a Selected Set | QKTTAB | CHAR | 1 | QKTTAB | ||||
| KATALGART2 | Catalog Type of Assigned Code Group or Selected Set | QKATAUSW | CHAR | 1 | Assigned to domain | QKATART | QKT | ||
| AUSWMENGE2 | Assigned Code Group or Selected Set | QCGRAUSW | CHAR | 8 | QCGRAUSW | ||||
| AUSWMGWRK2 | Plant of the Assigned Selected Set | QWERKAUSW | CHAR | 4 | Assigned to domain | WERKS | WRK | ||
| AUSWVERS2 | Version Number | QVERSNR | CHAR | 6 | ALPHA | QVERSNR | |||
| AUSWDAT2 | Key Date for Version Selection | QVERSDAT | DATS | 8 | DATUM | ||||
| KATAB3 | Catalog Entry Is a Selected Set | QKTTAB | CHAR | 1 | QKTTAB | ||||
| KATALGART3 | Catalog Type of Assigned Code Group or Selected Set | QKATAUSW | CHAR | 1 | Assigned to domain | QKATART | QKT | ||
| AUSWMENGE3 | Assigned Code Group or Selected Set | QCGRAUSW | CHAR | 8 | QCGRAUSW | ||||
| AUSWMGWRK3 | Plant of the Assigned Selected Set | QWERKAUSW | CHAR | 4 | Assigned to domain | WERKS | WRK | ||
| AUSWVERS3 | Version Number | QVERSNR | CHAR | 6 | ALPHA | QVERSNR | |||
| AUSWDAT3 | Key Date for Version Selection | QVERSDAT | DATS | 8 | DATUM | ||||
| KATAB4 | Catalog Entry Is a Selected Set | QKTTAB | CHAR | 1 | QKTTAB | ||||
| KATALGART4 | Catalog Type of Assigned Code Group or Selected Set | QKATAUSW | CHAR | 1 | Assigned to domain | QKATART | QKT | ||
| AUSWMENGE4 | Assigned Code Group or Selected Set | QCGRAUSW | CHAR | 8 | QCGRAUSW | ||||
| AUSWMGWRK4 | Plant of the Assigned Selected Set | QWERKAUSW | CHAR | 4 | Assigned to domain | WERKS | WRK | ||
| AUSWVERS4 | Version Number | QVERSNR | CHAR | 6 | ALPHA | QVERSNR | |||
| AUSWDAT4 | Key Date for Version Selection | QVERSDAT | DATS | 8 | DATUM | ||||
| KATAB5 | Catalog Entry Is a Selected Set | QKTTAB | CHAR | 1 | QKTTAB | ||||
| KATALGART5 | Catalog Type of Assigned Code Group or Selected Set | QKATAUSW | CHAR | 1 | Assigned to domain | QKATART | QKT | ||
| AUSWMENGE5 | Assigned Code Group or Selected Set | QCGRAUSW | CHAR | 8 | QCGRAUSW | ||||
| AUSWMGWRK5 | Plant of the Assigned Selected Set | QWERKAUSW | CHAR | 4 | Assigned to domain | WERKS | WRK | ||
| AUSWVERS5 | Version Number | QVERSNR | CHAR | 6 | ALPHA | QVERSNR | |||
| AUSWDAT5 | Key Date for Version Selection | QVERSDAT | DATS | 8 | DATUM | ||||
| GRUPPE2 | Code Group | QCODEGRP | CHAR | 8 | Assigned to domain | QCODEGRP | CGP | ||
| CODE2 | Code | QCODE | CHAR | 4 | Assigned to domain | QCODE | QCODE | ||
| VERSION2 | Version Number | QVERSNR | CHAR | 6 | ALPHA | QVERSNR | |||
| GRUPPE3 | Code Group | QCODEGRP | CHAR | 8 | Assigned to domain | QCODEGRP | CGP | ||
| CODE3 | Code | QCODE | CHAR | 4 | Assigned to domain | QCODE | QCODE | ||
| VERSION3 | Version Number | QVERSNR | CHAR | 6 | ALPHA | QVERSNR | |||
| GRUPPE4 | Code Group | QCODEGRP | CHAR | 8 | Assigned to domain | QCODEGRP | CGP | ||
| CODE4 | Code | QCODE | CHAR | 4 | Assigned to domain | QCODE | QCODE | ||
| VERSION4 | Version Number | QVERSNR | CHAR | 6 | ALPHA | QVERSNR | |||
| GRUPPE5 | Code Group | QCODEGRP | CHAR | 8 | Assigned to domain | QCODEGRP | CGP | ||
| CODE5 | Code | QCODE | CHAR | 4 | Assigned to domain | QCODE | QCODE | ||
| VERSION5 | Version Number | QVERSNR | CHAR | 6 | ALPHA | QVERSNR | |||
| STICHPRVER | Sampling Procedure in Inspection Characteristic | QSTICHVERF | CHAR | 8 | Assigned to domain | QSTPRVER | |||
| BEWREGELPR | Valuation Rule | QBEWERT | CHAR | 2 | Assigned to domain | QKEY1 | |||
| KZMFSAB | Dependent Multiple Samples | QKZMFSAB | CHAR | 1 | QKZ | ||||
| LOSMENGE | Inspection Lot Quantity | QLOSMENGE | QUAN | 13(3) | QMENGEPLOS | ||||
| MENGENEINH | Base Unit of Measure for The Inspection Lot Quantity | QLOSMENGEH | UNIT | 3 | Assigned to domain | CUNIT | MEINS | ||
| FAKPLANME | Factor for Converting MatUnitOfMeasure to SampUnitOfMeasure | QUMREN | FLTP | 16(16) | QUMRENFAK | ||||
| FAKPROBME | Factor for Converting SampUnitOfMeasure to MatUnitOfMeasure | QUMRENPME | FLTP | 16(16) | QUMRENFAK | ||||
| PROBMGFAK | Sample Quantity Factor for Sample(Mult. Sample Unit of Msr.) | QPROBEFAK | DEC | 5(2) | QPROBEFAK | ||||
| PRSCHAERFE | Inspection Severity | QPRSCHAERF | NUMC | 3 | Assigned to domain | QPRSCHAERF | |||
| UPSLV | Data Base Access | QUPSL | CHAR | 1 | QUPSL | ||||
| ATTRIBUT | Attribute of the Results Record (Valid, Invalid,...) | QATTRIBUT | CHAR | 1 | QATTRIBUT | ||||
| IDICALL | X and Blank | QKZ | CHAR | 1 | QKZ |
| Key field | Non-key field |
How do I retrieve data from SAP structure QABWR using ABAP code?
As QABWR is a database structure and not a table it does not store any data in the SAP data dictionary. The ABAP SELECT statement is therefore not appropriate and can not be performed on QABWR as there is no data to select.How to access SAP table QABWR
Within an ECC or HANA version of SAP you can also view further information about QABWR and the data within it using relevant transactions such asSE11 (ABAP Dictionary Maintenance)
SM30 (Maintain Table Data)
SE80 (Object Navigator)
SE16 (Data Browser).
Search for further information about these or an SAP related objects