SV SAP Message Class - Nachrichten View-Pflege Customize

SV is a standard message class available within your SAP system (depending on your versionand release level). Below is a list of all the messages available for within this class and a link to any long text associated with each message. These messages are very simple to use and can be implemented into your ABAP code using the MESSAGE statement and the following syntax.

MESSAGE I000(SV).

Note the value "I" represents an information messsage but can be replaced with E for error, W for warning, S for Status/Success, A for Abend/Termination and X for exit which does not display a message and causes a runtime error. Click here for more information about SAP Messages

Message class details can be viewed directly within your SAP system by entering the object name SV into the relevant SAP transaction such as SE91 or SE80.

000 &
001 The selected function is not supported
002 Number of retrieved entries: &




003 Entry retrieved
004 No entries found that match selection criteria
005 One entry chosen
006 Number of chosen entries: &
007 No previous entry exists
008 No next entry exists
009 An entry already exists with the same key
010 An entry with this key is marked for deletion
011 Number of deleted entries: &
012 Number of changed entries: &
013 Entry deleted
014 Number of entries copied: &
015 Target key must be different from source key
016 Number of reset entries: &
017 Entry reset
018 Data was saved
019 Choose the key from the allowed namespace
020 Choose a processing option
021 Choose one processing option only
022 Create control function module
023 Create data processing function module
024 Specify target entries
025 Specify target entries
026 Select entries before performing the function
027 Specify a program name (max. 8 characters)
028 Table & not in DDIC
029 Error accessing DDIC: & & &
030 Table & is not current
031 Only program & is currently permitted



032 Position the cursor on a valid entry
033 Specify the key within the work area
034 'To' value must be greater than 'from' value
035 Position the cursor on a selection field to choose an entry
036 Screen & does not exist
037 The maintenance dialog for & is incomplete or not defined
038 Specify selection criteria
039 Table & has no relevant fields
040 & entries reset, & original and & new entries are still marked
041 & entries reset, & original entries are still marked
042 & entries reset, & new entries are still marked
043 Data already saved
044 Read access only
045 Enter a start date that is before the end date
046 Enter an end date that is after the start date
047 Overlapping records are deleted or delimited
048 Input in the form: &
049 Data locked by user & (display only)
050 System error: Unable to lock table/view &
051 No data maintenance authorization; display only
052 No maintenance authorization for requested data
053 No display authorization for requested data
054 Maintenance of data in current client & not permitted
055 Address for object & not found
056 Mark at least one entry before selecting this function
057 The selected entry is new and has no original
058 The selected entries are new and have no original
059 The selected entry is still in its original state
060 The selected entries are still in their original state
061 & entries are still originals, & new entries have no original
062 Enter a name
063 Only display is permitted without request
064 Error allocating change reuest
065 No entries exist, double-click for long text
066 Select block end
067 Value & is not permitted by the view definition
068 In the view definition, the lower limit is &
069 In the view definition, the upper limit is &
070 The displayed value cannot be changed in this view
071 Enter only numbers, signs (+/-), and separators (./,)
072 Exponent is too large
073 Exponent is too small
074 Enter a floating point number
075 Entry has too many decimal places
076 Enter numbers only
077 Enter a value between &1 and &2
078 Enter only hexadecimal characters: 0123456789ABCDEF
079 Compare value has invalid format
080 "OR" links only permitted for the same field



081 Selection criterion cannot be deleted in this view
082 Do not enter any other characters between the numbers
083 Check table is currently locked
084 No values can be displayed
085 Table field & does not exist
086 Enter only permitted values (->F4)
087 Enter a link (AND/OR)
088 Enter only numbers and signs (+/-)
089 Enter a compare operator
090 The compare operator is only permitted for character fields
091 Permitted values can only be displayed for entry fields
092 Change task & is being processed
093 Use a change task you are authorized to change
094 Specify a change task number (F4)
095 System error changing change task &
096 Task & was changed
097 An error occurred while changing task &
098 Entry flagged for inclusion in task &
099 Entry was flagged for deletion from task &
100 Enter only a sign (+ or -)
101 Enter only values without +/- signs
102 Specify number for list screen (Dynp-1)
103 For 1-level maintenance screen 2 '&' is ignored
104 Specify both screen numbers for 2-level maintenance
105 & entries were flagged for inclusion in task &
106 & entries were flagged for deletion from task &
107 Entry was already in task &
108 & entries were already in task &
109 & entries included, & entries were contained: &
110 Entry was not in task &
111 & entries deleted, & entries were not included: &
112 & entries were not in task &
113 Entry could not be retrieved
114 & entries could not be retrieved
115 Entry could not be deleted
116 & entries could not be deleted
117 Do not make any changes (SAP entry)
118 Make any changes and new entries in the SAP name space only
119 When making changes and new entries, check the name space


120 Other entries are retrieved and modified if necessary
121 Deleted entry will be recovered and possibly changed
122 Entry was delimited
123 Number of delimited entries: &
124 Process delimited entries
125 Process delimited entry
126 Overlapping records will be changed or delimited
127 Delimit area of validity
128 Delivery class &, transport not possible
129 Related objects in various tasks
130 Client & is local, transport not permitted
131 Transport is not permitted in batch input mode
132 Object locked for task &1, user &2 only display permitted
133 Enter transport attributes
134 Inconsistency in object definition, only display permitted
135 Compare error
136 Change with caution, entry belongs to customer
137 Do not make any changes (SAP data)
138 Check maintenance object &1 or update function group &2
139 Address data is not taken over
140 &1 entries deleted, &2 entries taken over
141 Individual entries cannot be put into the change request
142 Transport is not possible for the specified data
143 Variant &1 for object &2 does not exist
144 Variant &1 for object &2 already exists
145 Variant &1 for object &2 has been deleted
146 Variant &1 for object &2 has been changed
147 Variant &1 for object &2 has been created
148 Variant &1 for object &2 has been adjusted
149 Internal error: Assign error
150 Begin action &4 for entry &1 &2 &3
151 End action &4 for entry &1 &2 &3
152 The definition of view & is inconsistent
153 No language was chosen
154 Test mode: Changes were not saved
155 Variant &1 of object &2 is empty
156 Specify a variant name
157 Variant cannot be saved without specifying conditions
158 Table/view &1 belongs to the complex object &2
159 Assign all view cluster & levels to view variants
160 The installed system codepage does not allow any other languages
161 Put the cursor on a form name
162 The object &1 &2 &3 cannot be put in a request
163 Object &1 compare status is not compatible with desired new status
164 Table/view &1 is not in the Dictionary
165 No address in import client for object &
166 Entry & & & does not exist
167 Enter a value within the allowed work area
168 Interactive compare for object & not possible
169 Incorrect value in XFELD
170 No object &1 maintenance IMG activity exists
171 Internal error
172 Client does not exist
173 Function group &1 inconsistent
174 Enter values in work area for non-key fields
175 The selected BC Set function is not supported
176 GUID in table key (field name &1) is not supported
177 Data record contains fix value from BC Set and cannot be deleted
178 Data type STRING is not supported in field &1
179 Table &1 is extendable without limits
180 Data for specified key areas unchangeable
181 Read access only
182 Selected key area locked by Customizing Distribution
183 Error in remote access to central Customizing Distribution system
184 Data record contains fixed value from BC Set and cannot be changed
200 The Business Configuration Set it incomplete for subobject &
201 Entry & from & of the Business Configuration Set not copied
202 You are not authorized to change fields with fixed BC Set values
203 Language-dependent entries for object & could not be activated
300 The length of the function group name is too short
301 Choose a processing option
302 Specify a view/table name
303 Please input an authorization group
304 Maintenance dialog for & does not exist
305 Create and activate table/view & in the Data Dictionary first
306 Table/view & is not active
307 Data Dictionary access error
308 & is not a view
309 Only use views of type "Maintenance view"
310 Error in dialog 'Structure definition'
311 Can not be deleted because it does not exist
312 Please choose at least one object to delete
313 Entry in view directory cannot be deleted
314 Request completed without errors
315 Request Completed. Check generation log
316 Request could not be completed
317 Entry in table/view directory is also deleted
318 Specify the number of the overview screen
319 In single-step maintenance, the single screen is ignored
320 Please specify the number of the single screen
321 Please specify a valid authorization group
322 The function group is not valid
323 Please specify a function group
324 The function group name should begin with '0'
325 Choose another function group
326 Function group is too large. If possible, use another function group
327 Function group has more than 40 modules
328 Please assign non-identical screen numbers
329 Screen number is already assigned
330 Update not possible because generation not complete
331 Not generated -> Re-generate instead of reset
332 Entry was created in the view directory
333 Entry was updated in the view directory
334 Entry was changed in the table/view directory
335 Function group was not changed
336 Choose at least one object
337 Program & does not exist
338 Please enter table/view from index
339 Overview screen & does not exist
340 Single screen & does not exist
341 Interface & deleted
342 Interface & added
343 Table & has no transportable package
344 View & has no transportable package
345 Table & can not be processed by extended table maintenance
346 Function group & does not exist
347 Please generate table/view & first
348 User & is already processing &
349 You have no change authorization
350 You have no display authorization
351 View & can not be processed by extended table maintenance
352 You are changing a function group which does not belong to you
353 The function group is in the customer name range
354 The function group is in the SAP name range
355 The screen number is in the reserved customer range
356 Generated objects can be created or changed
357 Please create the maintenance module first
358 The original of the table package & is in &
359 The original of the view package & is in &
360 No change was made
361 Tables of type INTTAB are not supported
362 Function group & locked by &(&)
363 & locked by transport &(&)
364 Table/View name must be at least 4 characters long
365 No entry was added to the correction
366 Please specify a complete structure name
367 No modules were generated
368 No authorization group assigned
369 The hierarchy structure can only be displayed for views
370 Please consider the transport of the entries
371 Make an entry
372 Execution stopped, entry in change task is not possible
373 No user-defined interface exists
374 The control information was created
375 The control information was deleted
376 Control information could not be deleted
377 Control information could not be added
378 The control information was already deleted
379 All associated control informationen was deleted
380 Neither interface nor control information exist
381 Interface and associated control informationen were deleted
382 The interface could not be deleted
383 Function group & does not exist
384 The interface & already exists
385 Error in correction system, control information was not deleted
386 Maintenance screen & will be deleted and re-created
387 Overview screen will not be re-created
388 Please choose at least one field type
389 Please choose a maintenance screen
390 Internal system error, processing canceled
391 The maintenance type has not yet been changed
392 Please choose a reason for change
393 Maintenance screen & will be deleted and re-created
394 The screen number & is reserved
395 You are in the edit function group
396 You are in table/view editing
397 System error: Function group & could not be locked
398 No entries in control folder for &
399 Function group & does not exist
400 The function group & can not be deleted
401 Structure & does not exist
402 Authorization assignment was saved with &
403 Authorization assignment was saved
404 Control information for time/interface will also be deleted
405 Control information for time/interface available
406 Information for time/interface could not be deleted
407 Includes for function group & exist with the same name
408 The function group & has no transport attributes
409 No transport attributes for table/view &
410 Entry in table/view catalog changed with &
411 Function canceled by user
412 & selected entry cannot be deleted
413 & selected entries cannot be deleted
414 Entry cannot be deleted
415 The maintenance object description has no transportable package
416 The original maintenance object description system &2 differs
417 Screen numbers have already been assigned
418 Overview screen number has already been assigned
419 Overview screen reset to original number
420 Single screen reset to original number
421 Overview screen and single screen reset to original numbers
422 Maintenance screen & is deleted
423 No maintenance object description exists for &
424 No transport request was created
425 There are no maintenance dialogs in function group &
426 Specify a valid structure type, type & is not valid
427 Pass a structure name
428 Table/View & is still in a View cluster
429 Object catalog entry for & & & does not exist
430 Enter a maintenance view variant name
431 Use only maintenance view variants
432 Maintenance view variant & has no maintenance dialog
433 Authorization group already assigned
434 Table/view & has at least one view variant
435 Editing maintenance object description
436 Use a name without a prefix
437 Only use names with the same prefix
438 Complete name &
439 Function group & cannot be processed
440 & maintenance interface cannot be deleted because of IMG link
441 Set the compare flag for dialog &
442 Update the compare fleag for dialog &
443 Modify the compare flag if an event changes
444 Modify the compare flag if a screen changes
445 Compare flag changes affect view variants
446 Compare flag changes affect view clusters
447 Compare flag changes affect view variants and view clusters
448 Package & does not exist
450 The cluster name is in the customer name range
451 The view cluster name is not in your namespace
452 The View cluster & can not be changed
453 The maintenance object description has no transportable package
454 The view cluster maintenance object transport layer & differs
455 There is no maintenance dialog for the View cluster structure objects
456 Maintenance interface for & could not be deleted
457 View cluster & does not belong to you
500 Select only one entry
501 The cluster object has no entries
502 No value selection conditions available
503 Structure table has no entries
504 The dialog box start positions are invalid
505 Number of dependent entries deleted: &
506 & entries with precedence missing, retrieval is therefore not possible
507 Number of entries with precedence retrieved: &
508 & entries with precedence and & dependent entries were retrieved
509 Number of dependent entries retrieved: &
510 Choose an entry from subdialog "&"
511 Choose a subdialog
512 Number of dependent entries copied: &
513 Table/View & is not in view cluster &.
514 Internal error (view cluster has not been initialized)
515 View cluster & does not exist
516 Internal error: Table/View & is too wide
517 You are already in the chosen subdialog
518 Enter a view cluster name
519 View cluster & already exists.
520 The User exit main program can not be of type &.
521 The user exit main program & does not yet exist.
522 The program name can not be deleted because events still exist.
523 Maintain view cluster & short text.
524 & higher level and & dependent entries flagged for request &.
525 & higher-level entries flagged for request &.
526 & dependent entries flagged for request &.
527 & higher-level and & dep. entries flagged for deletion from request &.
528 & higher-level entries flagged for deletion from request &.
529 & dependent entries flagged for deletion from request &.
530 Only enter valid values for "&"
531 & dependent entries copied, & entries already existed
532 Table/View &: No higher-level entry for & &
533 Request to compare contains no entry for subdialog "&"
534 Corresponding entry in "&" missing
535 Internal error: Entry & from & was not imported/deleted.
536 Data was not saved
537 No value selected
538 Dropdown lists are not supported in view clusters
540 Invalid compare flag value '&'
541 Compare flag is not set
542 Check the compare flag
543 View cluster contains several views with primary table &
547 Relationship between object & and its predecessor & may be n:m
548 No main program specified for the User exits
549 View cluster & event eror
550 Inconsistent definition of View cluster &; not activated
551 View cluster & was saved and activated.
552 View cluster & not activated.
554 View cluster & header entry is missing.
555 View cluster & object structure error.
556 View cluster & field-dependence error.
557 No hierarchy level specified for object &.
558 No dependency specified for object &.
559 No predecessor specified for object &.
560 &2 must also be specified as predecessor of object &1.
561 Object & can not be its own predecessor.
562 Several objects are flagged as initial object in view cluster &.
563 The display of the initial object & must not be suppressed.
564 No initial object specified for view cluster &.
565 The objects are not numbered consecutively by line.
566 No short text maintained for object &.
567 No object structure defined for the view cluster &.
568 Object structure of view cluster & not checked.
569 Field-dependency of view cluster & not checked.
570 Neither field nor predecessor field can be specified for the object &.
571 No field name specified in object & field-dependence.
572 & is not a direct predecessor of object &.
573 Objekt & contains no field with the name &.
574 No field-dependence defined for object &.
575 No entry for the predecessor & of object & in the object structure.
576 Max. number & objects exceeded in view cluster.
577 No field name specified for predecessor object &.
578 Field & of object & is not read only.
579 Key field & of object & is for navigation.
580 Invalid predecessor of object & for field-dependence type 'I'.
581 The specified field-dependence is not supported for table &.
582 The specified field-dependence is not supported for object &.
583 Field-dependence type 'I' for field & of object & is not allowed.
584 & is a view cluster variant
585 The view cluster contains subdialogs with and w/o navigation subscreens
586 Screen & could not be activated
587 Object & is a maintenance view variant; screen was not changed
588 Field dependencies were already complete
589 No hierarchy step could be determined for the object &
590 Object structure entry for object & modified
591 Field dependency for object & was generated
592 Field dependency for object & could not be generated
593 Field dependencies successfully generated
594 Field dependencies of type '&' for object & were generated
595 Field dependency generation canceled because of serious problems
596 Field dependence generation problems
597 Error changing screen & (screen was not changed)
598 Screen & was changed
599 Correction error (screen & was not changed)
600 Table/view & generation errors
601 No control folder entry for table/view &
602 No tables or active version in view &
603 No fields or active version in view &
604 Table/view & data dictionary access error
605 The view & has an invalid type
606 The definition of view & is inconsistent (no primary table)
607 Table & has an inconsistent foreign key relationship
608 Inconsistent foreign key relationship between & and & in view &
609 Program & could not be deleted
610 Screen & could not be deleted
611 Entry & in control folder could not be deleted
612 Conversion of screen & to 2.1 GUI not possible
613 Underscore missing in screen &
614 MODULE LISTE_UPDATE_LISTE missing in screen logic flow &
615 Screen & could not be saved
616 Screen & could not be generated
617 Field &-& can not be displayed on screen &
618 Field &-& is too long to fit on the screen
619 Table/view & contains too many fields
620 There are too many fields on screen &
621 Field &-& is too long, new visible length: &4
622 View & has no active version, but an entry in the control directory
623 View & has no active version and no entry in the control directory.
624 Field &1 shortened (new visible length: &2)
625 Screen &1: Fixed columns in Table Control too wide
626 Screen &4: Field &1 is too long. New output length: &2
630 Screen & could not be read
631 Validity range subscreen could not be inserted
640 Internal error: TVDIR_TAB-ENTRY lost
641 Internal error: Generation model & missing
642 Internal error: Nametab access error for table/view &
643 Internal error: Nametab access error for text table &
644 Internal error: Field & was not output on the screen
645 Internal error: Table/view name lost
646 Internal database interface error
647 Internal error (template screen &1 from program &2 missing)
648 Not more as 8 attributes for an organizational criterion
649 There is already an entry for the organizational criterion: Delete first
650 Function group & generation errors
651 Screen numbers assigned twice in function group &
652 Function group & ambiguous
653 Function module & could not be deleted
654 Program & could not be created
655 Main program & does not exist, function library error
657 Function module & could not be created
658 Function group & is invalid
659 There are too many function modules in function group &
660 Function module name & invalid
661 Internal function library error
662 Function module & already exists
670 Incorrect request type. Specify an object list.
680 Maintenance dialogs in function group &1 are not Unicode-compatible
681 Include &1 contains Unicode-incompatible code for generated maint.dialogs
682 No navigation area
700 Maintenance modules of & are not in a transportable package
701 Viewcluster & contains client-specific and cross-client objects
702 Viewcluster & contains client-specific and cross-client objects
703 Object & is not in a transportable package
704 The transport objects do not have the same transport layer
705 The transport objects do not have the same transport attributes
706 Function groups written to transport request(s)
707 Includes regenerated
708 A transport request is required for background processing
749 Not all deletions can be made (see long text)
750 Choose an organizational criterion first
751 Organizational criterion &1 does not exist or is incomplete
752 Organizational criterion &1 is inconsistent
753 Lower interval limit is greater than upper interval limit
754 Choose a key field
755 You have no row display authorization for this data
756 You have no row maintenance authorization for this data
757 You have no maintenance authorization for this table key
758 You have no display authorization for this table key
759 You have no maintenance authorization for this field value
760 You have no display authorization for this field value
761 You have no maintenance authorization for this selection
762 You have no display authorization for this selection
763 You have no maintenance authorization for the displayed data records
764 Changed data record selection
765 Several table fields per attributs are not yet supported
766 Restricted display of datasets
767 Restricted selection of logon client/system datasets
768 Restricted selection of comparison client/system datasets
769 Restricted dataset selection in both systems or clients
770 No display authorization for this selection in the comparison system
771 &1 is not a valid namespace prefix for the organizational criterion
788 View/table & can also be maintained independently of view cluster
789 Display and Maintenance of view/table & not allowed
790 You cannot create a maintenance dialog for the table/view &
791 You cannot display a maintenance dialog for the table/view &
792 View/table & can only be displayed and maintained with restrictions
795 You cannot create a maintenance dialog for the view & (Basis table: &)
796 You cannot display a maintenance dialog for the view &
800 Table is too wide for display
801 Maximum number of report locks reached. Please try again later
802 Error generating print report
803 Print request generated
804 Errors occurred in the print report name number assignment
805 Errors occurred while creating the print report number range
806 Action performed
807 Choose no more than 99 fields for the list
808 Not all columns in the table can be displayed in the list
810 View &1 is more than 1000 characters long
818 &1 of &2 Business Configuration Set entries imported
819 Business Configuration Set imported
820 No Business Configuration Set found
821 No Business Configuration Set exists for view &
822 No Business Configuration Set exists for table &
823 Function not yet available.
824 Business Configuration Set can only be added as new entry
825 Number of data records copied from Business Configuration Set: &
826 A Business Configuration Set key is incomplete
827 A Business Configuration Set key is inconsistent
828 Data record with the same key already exists
829 View &1: View cluster &2 does not contain data at all levels
830 Last selected entry has been reached
831 First selected entry has been reached
840 Do not use the characters '_' and '%' in this case
850 Package &1 cannot be transported
851 View cluster is already open. Go Back with F3
860 Access in customer system only for preliminary corrections
862 At least one of the entries violates uniqueness requirements .