01 SAP Message Class - Allg. Basis: z.B. Benutzer und Berecht.pflege

01 is a standard message class available within your SAP system (depending on your versionand release level). Below is a list of all the messages available for within this class and a link to any long text associated with each message. These messages are very simple to use and can be implemented into your ABAP code using the MESSAGE statement and the following syntax.

MESSAGE I001(01).

Note the value "I" represents an information messsage but can be replaced with E for error, W for warning, S for Status/Success, A for Abend/Termination and X for exit which does not display a message and causes a runtime error. Click here for more information about SAP Messages

Message class details can be viewed directly within your SAP system by entering the object name 01 into the relevant SAP transaction such as SE91 or SE80.

001 No matching user found
002 User must be saved before assigning task profiles
003 Object group & saved




004 Position cursor on an object group
005 Enter a name for the object group
006 Object group & already exists
007 Error maintaining a variant variable
008 Specify at least one selection criterion
009 User address copied from SAPoffice data
010 Transaction & does not exist
011 No number ranges exist for company code $
012 Program error (contact SAP)
013 & is locked by another user
014 You are not authorized to give all users external security names
015 You are not authroized to assign start checks to all transactions
016 Address is locked
017 No default co. address has been maint. in the system. Create an address
018 Company address could not be created
019 Company address locked. No modifications currently possible
020 Error occurred in address management. & sy-subrc = &
021 W a r n i n g !!! Dangerous to SKIP log record !
022 Inconsistency with address
023 Please expand on lower-level; Not possible on level 1
024 Maintain address data
025 Company address cannot be selected
026 Internal error: FM &, exception: &
027 Does not contain &
028 Invalid time zone
029 Output device & does not exist
030 Transaction & does not exist (choose an available transaction)
031 Auth. objects were already assigned to trans. & (copying not possible)
032 No auth. objects assigned to trans. & (copying not possible)



033 Print parameters & for 'Delete after print' not equal to D(elete)/K(eep)
034 Object group & not available (copying not possible)
035 Print parameter & for 'Print immed.' not equal to G(o) or H(old).
036 Invalid date format &
037 Parameter ID & does not exist
038 Selected profile/object not contained
039 User & has changed
040 No authorization to create user groups
041 No authorization to create user group &
042 No authorization to delete user group &
043 No authorization to adjust user groups
044 All user buffers successfully reset
045 User buffers already reset
046 Profile assignment for user & has changed
047 Profile assignment to user & was not completely executed
048 Role assignment to user & changed
049 Role assignment to user & not executed completely
050 Use the profile generator to delete the generated profile
051 Use the profile generator to delete the generated auth.
052 Address not maintained
053 Only numeric entries are permitted in field &
054 System is not a child system in a central user maintenance network
055 User buffer reset successfully
056 Error occurred whilst resetting user buffer
057 You are not authorized to reset the user buffer in all clients
058 Problem occurred when creating subordinate profiles or auths
059 Company address & not found in the system
060 Action canceled by user
061 No authorization to generate profile SAP_ALL
062 Profile SAP_ALL generated
063 Start report RSUSX001, company object to company addresses
064 Date: & time &
065 Report RSUSX001 complete. Date: & Time: &
066 Unable to generate a company object for address & in client &
067 Unable to assign company address &1. &2 used instead.
068 You have not selected a system
069 Unable to read the address
070 Profile for role not yet generated
071 No system found in the current CUA for this selection
072 Profile & does not exist; enter a valid value
073 & successfully saved as the standard company
074 This action is only possible for &
075 The standard company address cannot be deleted
076 Unable to determine the company
077 Failed to create the address. (the number could not be pulled)
078 Company address & created
079 Company address & changed
080 Company address & deleted
081 Company address & does not exist. Unable to delete it



082 Company address could not be locked
083 Company & does not exist
084 Company & already exists
085 Company address &1 was renamed to &2
086 Decimal format & is invalid. (Not ' ', X or Y)
087 Creation started of user in central system
088 User & exists
089 Profile assignment for user & was deleted
090 Role assignment to user & deleted
091 User was renamed. Old password is invalid
092 You must specify the last name of a user
093 An entry already exists for parameter &
094 Generated password for user &1: &2
095 Choose one or more of the time-independent relationships
096 Maintain composite activity groups in the dependent systems
097 Could not create control container (&)
098 Could not create object & (SY-SUBRC = &)
099 Event registration failed (SY-SUBRC = &)
100 Enter name and short text
101 Profile & already exists. Please use another name
102 User & created
103 Incorrect profile type; choose another profile
104 Choose a document type
105 Invalid time interval: Start date &1 after end date &2
106 Profile & and authorizations saved
107 Object & auth. & exist already
108 Profile & and authorizations saved and activated
109 Could not adjust profile &
110 Choose a function area
111 Object & is not available. Choose an existing object
112 Function & is not available. Please choose an existing function
113 You are not authorized to create application areas
114 You are not authorized to add objects
115 You are not authorized to delete functions
116 You are not authorized to delete application areas
117 You are not authorized to delete objects from function areas
118 Function & cannot be deleted because it is used in other functions
119 Function & already exists and cannot be created
120 Select business processes


121 Select the functions to transport
122 Function(s) added to request &
123 Data for transaction & saved
124 User & does not exist
125 Position the cursor on a profile or an authorization
126 Choose a profile type
127 Profile & does not exist
128 Object & does not exist
129 Authorization & does not exist
130 $ is not a menu. (Choose a menu)
131 Please choose one of the languages installed
132 The logon language does not match system code page &
133 No authorization to create activities in table TACT
134 Create table ZAUTHCUST ---> See long text
135 Maintain Basis or application fields
136 Maintain customer fields
137 No auth. to delete activities from TACT
138 Choose a version
139 Position the cursor on a profile
140 The name & does not conform with the standard. Select another name.
141 The authorization name is invalid
142 The profile name is invalid
143 Object class & does not exist
144 Position the cursor on a profile or user
145 Position the cursor on a user
146 Position the cursor on an authorization object
147 Position the cursor on an authorization
148 Position the cursor on an authorization or a user
149 No authorization exists for object &
150 Function block is not in table TFBLK
151 Processing started in background
152 You are not authorized to assign or remove system &
153 New system & was assigned to the user
154 System can only be removed using tab 'System'
155 System type & already exists
156 Place cursor on a user group
157 Schedule regular distribution. See long text.
158 Error releasing container & (SY-SUBRC = &)
159 Flush failed (SY-SUBRC = &)
160 Incorrect cursor position
161 No authorization for migration
162 System type & created
163 System type & deleted
164 System type from system &1 migrated to &2
165 Deletion not possible here
166 Distribution triggered
167 User group & in HR-Org not recognized
168 User group & still used in user master records
169 System type & still used (cannot not deleted)
170 Object type & does not exist
171 Welcome &1
172 Logged on
173 Logon data error
174 Fill all fields flagged with (*)
175 Password not reset, so e-mail address cannot currently be found
176 Your new password could not be sent to you
177 Your new password is sent to your e-mail address
178 The password is only sent to the E-Mail address saved previously
179 Assignment of application object &2 changed by user &1
180 Do not enter the composite profile & (cycles)
181 Please restrict the profile work area
182 Profile SAP_ALL is not available in this system and client
183 No user found for alias &
184 Alias &1 does not match user &2
185 The alias is: &
186 Central system not accessible (&1&2)
187 Added object class(es) to request &
188 Added object(s) to request &
189 The alias & already exists
190 Specify a request number assigned to you
191 Request & is already being processed
192 System error adding to request
193 Select the profiles to be transported
194 Select the authorizations to be transported
195 Flag the object classes to be transported
196 Flag the objects to be transported
197 Profile(s) with all independent objects added to request &
198 Profile(s) added to request &
199 Authorization(s) added to request &
200 Profile & already exists
201 User & was copied to &
202 Profile & was copied to &
203 Authorization & already exists
204 Authorization & copied to &
205 Please enter an object short text
206 Object & does not exist
207 Field & does not exist (contact person in charge)
208 Object & exists in class &. Specify another name
209 Position the cursor on a valid entry field
210 Profile & saved
211 User & does not exist
212 Class & cannot be deleted because objects for it still exist
213 Profile & already contained in composite profile
214 Profile & does not exist
215 Authorization & is not available
216 Object class & was deleted
217 No maintenance version exists for this authorization
218 No maintenance version exists for this profile
219 Please choose just one option
220 Object & cannot be deleted because it still contains authorizations
221 Field assignment for object & cannot be changed as auth. for it exist
222 Profile & was entered for & user(s)
223 Do not enter a composite profile into another composite profile
224 User & already exists
225 Profile & does not exist or is not active
226 User & was saved
227 Please choose an active profile
228 Enter object text
229 Authorization & was saved
230 Authorization & was deleted
231 No fields have been maintained for this object
232 User & deleted
233 Authorization field & does not exist (Maintain first)
234 Profile & has been deleted
235 Profile $ has no maintenance version
236 Please choose an authorization
237 Do not enter this composite profile (cycles)
238 No maintenance version exists for authorization &
239 No active version exists for authorization &
240 No maintenance version exists for authorization &
241 List is printing...
242 No documents exist for user &
243 No documents exist for profile &
244 No documents exist for authorization &
245 User & locked
246 User & unlocked, if this is permitted in this system
247 Profile & is not active. Please choose another profile
248 No active version exists for profile &
249 Only customer objects can be changed
250 Do not delete any SAP auth. objects
251 User &1 could not be deleted
252 Profile & activated
253 Authorization & was activated
254 Profile & cannot be deleted because it is used in composite profile &
255 Authorization & cannot be deleted because it is used in profile &
256 Incorrect authorization object. Please notify your system administrator
257 Please use only Basis authorization fields
258 Authorization & is already in the profile
259 The initial interval value is larger than the end value
260 Maximum number of authorizations exceeded in profile &
261 Please specify a class name
262 Too many values in authorization &1 for object &2
263 Maximum number of profiles for user & exceeded
264 Please specify the user name
265 Please specify the profile name
266 Please specify an object
267 Please specify an authorization name
268 Profile & already contained in user master record
269 Maximum number of profiles exceeded in composite profile &
270 Auth. & cannot be deleted as it is used in & profile(s)
271 Profile & cannot be deleted as it is used in & user(s)
272 Assign user to just one type
273 No user is available
274 User & does not exist
275 The password was changed
276 Place the cursor on a level 2 or 3 function
277 Password for user & reset
278 Please enter new password
279 Enter a user name
280 Values for user & saved
281 Address for user & saved
282 Values for user & deleted
283 Address for user & deleted
284 No values exist for user &
285 No address exists for user &
286 You can only mark one format
287 Profile & used in composite profile &
288 Parameters saved
289 There is no address data for user &
290 Please enter an initial password
291 Mark the profiles to be activated
292 The authorizations are activated
293 The passwords specified must be identical
294 Please enter the same password twice
295 Profiles activated
296 No entry selected
297 Error occurred saving: & &
298 There are no parameters for user &
299 Please specify reference and target
300 Object & already entered
301 Function & already entered
302 Some roles not assigned due to incorrect authorization
303 Some roles not assigned because they are locked
304 Some roles not assigned because they do not exist
305 Lock/unlock not possible
306 Field: &1; before: &2; after: &3
307 Address information for user & changed
308 Logon data for user & changed
309 Fixed values for user & changed
310 Parameters for user & changed
311 Profiles for user & changed
312 Roles for user & changed
313 Systems for user & changed
314 Before: &
315 After: &
316 Number of users changed: &
317 Mass user changes
318 Executed by: &1 (&2)
319 & & & &
320 System: &1 Client: &2
321 Do not confuse "Add" and "Delete" for system-dependent data
322 Do not mix "Add" and "Remove" functions for roles and profiles
323 Changes not allowed in this system (central user administration active)
324 User groups changed by user &
325 Check whether you already have an account
326 You cannot logon at the moment. Try again later
327 Company address & is still used
328 Data deleted
329 not changed
330 Deleted
331 Added
332 Role &1 with target system &2 should be assigned to system &3
333 User &1 is still locked
334 User &1 has not been locked
335 Some systems not assigned due to missing authorization
336 Some profiles missing due to missing authorization
337 Some groups not assigned due to missing authorization
338 User &1 copied to user &2
339 Reference user &1 does not exist
340 Role assignment for user &1 not completely deleted
341 Profile assignment for user &1 not completely deleted
342 License data for user & was changed
343 The alias & does not exist; check your entry
344 Generated authorizations can only be displayed
345 Function cannot be run for generated authorizations
346 Generated profiles can only be displayed
347 Function cannot be run for generated profiles
348 System is the central system or not a child system
349 It is not possible to delete user &1 in child system &2
350 ALE distribution model is inconsistent
351 You have not logged onto the central system
352 You cannot use the ALE distribution model
353 Cannot activate Central User Administration in system &1; &2
354 Cannot reach the system by RFC
355 Target system & is new in the system landscape
356 You can only distribute the data from the source system
357 You will automatically be forwarded to transaction "SCUA"
358 You do not have authorization to maintain users in the dependent system
359 You have not defined the source system
360 System & was deleted from the infrastructure
361 Could not save profiles and role assignments
362 You can only transfer users from new systems
363 User transfer for system & is already active
364 You do not have authorization to maintain users in the central system
365 Specify the target system and the user
366 No further log information exists
367 You cannot refresh with this data selection
368 The distribution has not yet been confirmed by the target system
369 Cannot delete: Target system &1 is part of an active CUA
370 You do not have minimum authorization to maintain the system landscape
371 You do not have authorization to transfer users
372 You do not have authorization to display the log
373 Logical system &1 is not defined in view V_TBDLS
374 Error when generating partner profile in system &1; see long text
375 Distribution model saved and activated
376 Distribution model activated in child systems
377 Child system &1: Activation of Central User Administration
378 Error when generating partner profile in system &1
379 Error when saving the ALE distribution model in child system &1
380 User not in selection variant
381 System &1 is not part of Central User Administration
382 Wait for Excel to exit
383 Central User Administration activated
384 No partner profile for target system &1 exists in the central system
385 Check message type USERCLONE for child system &1
386 The message type USERCLONE was set to &3 for system &1
387 Central system: Activation of the Central User Administration
388 ALE distribution model was saved
389 Password distribution is deactivated in Customizing (SCUM)
390 User &1 does not exist
391 User &1 is not a reference user (see long text)
392 Text comparison was started
393 Error when starting the text comparison
394 CUA definition is inconsistent; for repair, see long text
395 Cannot access system &1 using RFC
396 Place the cursor in a valid line and column
397 Field & does not exist
398 Date format & is invalid; profile parameter is used
399 Decimal format & is invalid; profile parameter is used
400 Use characters >= ' ' (blank)
401 New password cannot begin with '?'
402 Password is not long enough. Please choose a different password.
403 The first three characters of a password must all be different
404 The first three characters must not occur in the user name
405 Password invalid (choose another password)
406 Program error occurred
407 Password invalid (choose another password)
408 There is already an entry for group &
409 The date format & is not yet supported (see SAP Note 831333)
410 Maintenance of user &1 locked by user &2
411 Maintenance of profile & locked by another user
412 Maintenance of authorization & locked by another user
413 System lock administration error. Please notify your administrator
414 At least one login/min_password_* profile parameter is too large
415 A problem occurred in the kernel routine RSEC_GEN_PASSWD
416 No valid password generated; try again
417 Could not create user &1
418 At least one parameter value for GEN_PSW_MAX_* is not correct
419 Password hash is rejected; password is deactivated
420 Deletion of user started in CUA central system
421 You are not authorized to temporarily deactivate the CUA.
422 'Valid from' value must be lower than 'valid to' value
423 Object & cannot be changed
424 Parameter & cannot be selected
425 Authorization destroyed (delete and create again)
426 Printer & is impossible (choose another printer)
427 Profile & is inactive (use another profile)
428 Authorization & is inactive (use another authorization)
429 There is a data inconsistency in the company addresses
430 The new child system & is not included in the CUA
431 Enter a short text
432 Object class & already exists. Choose another name
433 Please specify the target object class
434 Object class & does not exist. Please specify an existing class
435 Object cannot be created here. Please use another object class
436 Object & was saved
437 Object & was deleted
438 Please choose an object class
439 Choose an object
440 Fields were saved
441 Fields were activated
442 Data element & does not exist (please maintain first)
443 Data element & is inactive (please activate first)
444 Field table is not available (notify person in charge)
445 Field & already exists (use another name)
446 Field maintenance locked by &
447 Field table empty (notify person in charge)
448 Field maintenance is locked
449 Saving unsuccessful (notify person in charge)
450 Activating unsuccessful (notify person in charge)
451 Choose a line with data element
452 Field & entered
453 Field & cannot be deleted because it exists in at least 1 object
454 Field & was deleted
455 Field & was added
456 Please specify a field name
457 Enter a data element
458 Foreign key maintenance not possible for this field
459 Foreign key maintenance not possible for this field
460 You are not authorized to display object classes
461 No authorization to create object &
462 No authorization to change object &
463 You are not authorized to delete object &
464 You are not authorized to display object &
465 You are not authorized to activate all profiles
466 You are not authorized to create object classes
467 You are not authorized to delete object classes
468 You are not authorized to change object classes
469 You are not authorized to activate all authorizations
470 You are not authorized to maintain profiles
471 You are not authorized to create profile &
472 You are not authorized to change profile &
473 You are not authorized to delete profile &
474 You are not authorized to activate profile &
475 You are not authorized to display profiles
476 You are not authorized to create profiles
477 You are not authorized to display change documents for profile &
478 You are not authorized to create profile &
479 You are not authorized to create profiles
480 You are not authorized to maintain authorizations
481 You are not authorized to create authorization &1 for object &2
482 You are not authorized to change authorization &1 for object &2
483 You are not authorized to delete authorization &
484 You are not authorized to activate authorization &1 for object &2
485 You are not authorized to display authorizations
486 You are not authorized to display objects
487 You are not authorized to display change documents for authorization &
488 You are not authorized to create authorization &
489 You are not authorized to create authorizations for object &
490 You are not authorized to maintain users
491 You are not authorized to create users in group &
492 You are not authorized to change users in group &
493 You are not authorized to delete users in group &
494 You are not authorized to lock users in group &
495 You are not authorized to display users
496 You are not authorized to delete all users
497 You are not authorized to display change documents in group &
498 You are not authorized to create users
499 You are not authorized to make bulk changes
500 No authorization to copy user &
501 Decimal point must be . or ,
502 You are not authorized to enter/delete profile &
503 No authorization to assign user to user group &
504 Error reading XUSR
505 No authorization to assign to group &
506 No authorization to assign role &
507 No authorization to display assignments
508 No authorization to assign user to group &
509 Subsidiary system & deleted
510 You are not authorized to display authorization &1 for object &2
511 You are not authorized to display profile &
512 You are not authorized to display users in group &
513 You are not authorized to unlock users in group &
514 You are not authorized to change passwords in user group &
515 No authorization to create auth. fields
516 No authorization to change auth. fields
517 No authoriztion to delete auth. fields
518 User group & does not exist
519 Invalid user type &
520 Object & already exists
521 User group & already exists
522 User group & deleted
523 User group & created
524 User group & changed
525 Specify a user group
526 You are not authorized to remove group &
527 You are not authorized to change the reference user assignment &3
528 The reference user assignment has been changed
529 The reference user assignment has not been changed
530 This function cannot be selected
531 Error while calculating hash value
532 Conflict during hash value calculation
533 External ID is empty
534 Type &1 for external ID is unknown
535 The status of an external ID must be "X" or " "; but is "&1"
536 Old name must not be empty
537 New name must not be empty
538 External ID maintenance is no longer available
539 You are not authorized to change the CUA system assignment for system &1
540 You cannot log on (CUA system assignment missing)
541 The RFC status of system &1 is unknown
542 User &1 is locked
543 Debugging an external session is not allowed (profile value: &1)
544 You have no authorization for debugging
545 User &1 is not authorized for debugging
546 You are not authorized for the external debugging of user &1
547 You are not authorized to display the change documents for role &
548 You are not authorized to display change documents for roles
549 You are not authorized to display change documents for users
550 Please enter the name of a work area.
551 Enter a short description for the process.
552 Enter an auth. object or a subprocess.
553 Indicate mandatory or optional.
554 Please describe the usage of the auth. objects
555 Please enter documentation for the object
556 Master language is &; Documentation can only be displayed
557 Active profiles and authorizations are internally consistent
558 Could not access the central system &1
559 Cannot perform complete save due to lack of authorizations
560 & is not an object class. (Please choose an obj. class available.)
561 Please enter function name and short text
562 First enter an object name
563 RFC user is not authorized to display users
564 Error when inserting into table PRGN_CUST
565 PRGN_CUST switch &1 set to &2
566 Password for user &1 is deactivated
567 You are not authorized to change CUA system assignments
568 You are not authorized to copy users from system &1
569 XPRA is not required as of start release SAP NetWeaver 7.10
570 Authorization object & is used in programs (see long text)
571 User group & deleted
572 Target client &1 is part of a CUA: no import of user assignments
573 You are not authorized to assign system &1 (profile &2)
574 You are not authorized to assign system &1 (role &2)
575 System has not saved log settings
576 User &1 cannot log on to this client.
577 User groups were adjusted
580 You are not authorized to display information about the systems
583 Assign a user group (see SAP Note 1663177)
584 No authorization for this action
585 You are not authorized to assign profiles for system &1 &4
586 You are not authorized to assign roles for system &1 &4
587 No authorization to distribute users to system &1
588 No authorization to distribute users
589 You are not authorized to assign profiles &3
590 You are not authorized to assign roles &3
591 The HR infotype 0105 could not be deleted for user &1
592 Could not change the HR org. infotype 0105
597 No profile found in the selected area
600 Enter a name and select at least one line
601 Please select at least one administrator type
602 Enter a user name
603 Save user first
604 User &1
605 Data saved
606 You are not authorized to define a system landscape
607 Parameter ID &1 does not exist in central system
609 Internal error at &1, &2&3&4
610 Selection criterion &1-&2 is not supported
611 Invalid parameter value at &1
612 Search for communication data: Sign & is not supported
613 Search for communication data: Option & is not supported
614 Logical operation & is not supported
615 Logical operation and arity are only supported in the first line
616 Specify parameters
619 Choose a role name
620 Please choose an authorization name
621 Invalid authorization type; choose another authorization
622 Please choose a user name
623 User & does not exist, please choose an existing user
624 Choose a profile name
625 Profile & exists already; choose another name
626 Enter a short text
627 Specify all values
628 Not possible to add further nodes
630 Entered user name contains characters that are not permitted
631 You are not authorized to assign user group &1 to system &2
632 Ref. user &2: No authorization for group &1 for profile &3, system &4
633 Reference uesr &2: No authorization for user group &1 for profile &3
634 Reference user &2: No authorization for group &1 for role &3, system &4
635 Reference user &2: No authorization for user group &1 for role &3
636 You are not authorized to assign user group &3 to profile &2, system &1
637 You are not authorized to assign user group &3 to role &2, system &1
638 You are not authorized to assign user group &2 to profile &1
639 You are not authorized to assign user group &2 to role &1
640 Field name &1 already exists in the object
641 At least one authorization field does not exist; not possible to save
642 No use of object &1 found in search area
643 You are not authorized to assign user group &1 to systems
644 You are not authorized to assign user group &1 to profiles
645 You are not authorized to assign user group &1 to roles
646 You are not authorized to move users to the group &1
650 You are not authorized to make changes
651 Please choose an object
652 Select a row
653 Central license data maintenance is not supported by all systems
654 Object & does not have an authorization field &
655 Specify a linkage (AND/OR)
660 Authorization & is not used in a profile
661 Profile & is not used in a user
662 Cannot delete; user &1 is in use as a reference user
666 & & & &
670 Target system &1: Release &2 is lower than Release 4.6C
671 System could not create service user
680 Could not perform text comparison for roles
681 Text comparison performed for role &1 and system &2
682 &1 in CUA central system for system &2 is locked by user &3
683 No manual text comparison for roles required (SAP Note 1642106)
684 Text comparison for roles started using: &1 (&2: &3)
685 Text comparison for roles of system &1 partially performed
690 No BAdI filter assigned to user &
691 BAdI filter & does not exist in table IDM_BADI_FILTER
700 Table TSTCA already updated
701 Bad data in table TSTCA_C. Please do not reload this data.
707 No entries found with these selection criteria.
710 Int. error when archiving document & &
711 Archive access error with document & &
712 Input/output error writing document & &
713 Error writing document & &
714 Archiving was cancelled by the administrator
716 Input/output error opening file & for reading
717 Internal error opening file & for reading
718 File & does not exist
719 Archive object & was not found
720 Error opening file & for reading
721 Inout/output error reading a data record
722 Internal error reading a data record
723 Error opening/reading a data record
724 Archive access error reading a data record
725 &1 records with key characteristic SPACE were not archived
726 1 record with key characteristic SPACE was not archived
727 &1 records with key characteristic SPACE deleted
728 1 record with key characteristic SPACE deleted
730 Internal error writing the statistics
731 Archive access error writing the statistics
732 Internal error closing file &
733 Archive access error closing file &
734 Only restricted changes are possible for field &1
735 First authorization field
736 Last authorization field
737 Output length of data element &1 is greater than 40 characters
738 Authorization field names must contain a maximum of 10 characters
739 Character &1 is not permitted in authorization field names
740 You are not authorized to archive user master documents
741 You are not authorized to read user master documents
742 You are not authorized to delete authorization documents
743 You are not authorized to delete profile documents
744 You are not authorized to delete user documents
747 Note: Authorization field &1 is used in Workbench objects
750 User & does not exist
751 Invalid time period
752 Client & not created
753 User identical to substitute
754 Invalid country supplement entered
755 Change indicator &1 is not supported
760 Selected combination must include object S_TCODE.
770 The validity date is being set to the last logon date
771 The system sets the validity date and an administrator lock!
772 The parameters for password change contain an invalid combination
773 Password &1 was set in the following system: &2
777 No authorization to perform mass changes
780 Error when displaying the role in child system: &1&2&3&4
781 &1 is displayed in a new session (in &2)
782 The role with the same name, &1, is displayed in central system &2
783 Error when displaying the role in the central system: &1&2&3&4
790 Target client is central system of central user administration
791 CUA target system: User distribution started in background
792 The status of child system &1 has been changed
793 There is already an entry for system &1
800 Select a user
801 Position the cursor on the user name
802 Search is running
803 No authorization to display critical transaction combinations
804 No authorization to change crit. comb.
805 No maintenance authorization for cross-client tables.
806 No maintenance authorization for user &.
807 No display authorization for user &.
808 You are not authorized to change crit. authorizations
809 Enter values
810 Object not unique, please specify.
811 System & does not exist
812 Client & does not exist.
813 Proposals accepted.
814 Profile does not exist
815 Role does not exist
816 Roles are in different systems and cannot be compared
819 Function does not exist
820 Client not available.
821 System can not be reached
822 System does not exist.
823 Incorrect entry
824 User does not exist
825 No authorization
826 Choose the "Input Values" button
827 Enter date
828 Enter a role name
829 & roles with missing authorization not displayed
830 Display authorization required for all users.
831 Internal error: A record is missing for user &1 in table USREXTIDB
832 Could not lock maintenance of the external IDs for user &1
833 Internal error when saving an external ID for user &1
834 Could not unlock maintenance of the external IDs for user &1
840 Only the option '=' or pattern is possible here.
845 Target system was deleted from the "Systems" tab page
850 No active plan version available
851 Specify plant variant.
852 Enter a name
853 Role & does not exist
854 No profiles are assigned to user &
855 Composite role & does not contain any single roles
856 No profiles for the contained single roles
857 There is no profile for role &
858 User master comparison is globally deactivated (see long text)
860 Select role
861 You are not authorized to call the profile generator.
862 Error occurred determining user allocation
863 &2 is a generated profile. Assign the associated role &1
864 &1 is a generated profile. Assignment is therefore impossible.
865 Profile &2 does not exist in system &1.
866 Profile &2 generated in system &1. Assignment cannot be carried out.
867 Enter a variant name for critical combinations
868 Enter a variant name for critical authorizations
869 Variant & is consistent
870 Variant &1 does not exist
871 Variant &1 does not contain any valid critical authorizations
872 Variant &1 does not contain any valid critical combinations
873 You are not authorized to display authorization profiles
874 No user groups found in selected area
875 User group & was already assigned to the operator &
876 Field & does not exist
877 You are not authorized to display users
878 The result list is incomplete due to missing authorizations
879 Enter an ID
880 ID & already exists
881 & authorizations deleted
882 Use the new version &
883 Variant & contains errors
884 The critical authorization &1 is empty
885 The critical combination &1 is empty
886 Group &2 in the critical authorization &1 has errors
887 Critical combination &1 contains the incorrect authorization &2
888 & Users not displayed due to missing authorization
890 No values for object S_TCODE contained in authorization &
891 No display authorization for authorization &
898 No changes made. Problems with following users...
899 Following problems occurred with user &:
900 Not possible to add further nodes
901 Roles for user & successfully saved. .