rspo/lpq/temp_disable_slow SAP Parameter attribute - Time threshold (seconds) after which slow printers are deactivated

rspo/lpq/temp_disable_slow is a SAP Parameter attribute which is used to control Time threshold (seconds) after which slow printers are deactivated information. This is available within R/3 SAP systems depending on the version and release level.

Below is the standard documentation available and a few details of the attributes values .

rspo/lpq/temp_disable_slow profile paramerter attributes

Parameter Name: rspo/lpq/temp_disable_slow
Description: Time threshold (seconds) after which slow printers are deactivated
Default Value: 30
Parameter Type ( See IF_PARAMETER_TYPES): Integer(INT)
Restriction Values:
Parameter Unit: sec
Parameter Group: Spool
CSN Component: BC-CCM-PRN
System-Wide parameter: No
Dynamic Parameter: No
Vector Parameter: No
Has Sub-Parameters: No
Check Function Exists: No

Parameter documentation

If, when querying a status, the wait time for a response exceeds this interval, the device concerned is temporarily deactivated by the R/3 spool for the interval that is specified in rspo/lpq/temp_disable_time. This deactivation relieves the spool work process from idle contact attempts. The incident is also reported in the system log. See also rspo/lpq/warn_time.

See SAP Parameter Documentation for full SAP documentation for this profile parameter.