SAP Messages

LR SAP Message Class - CATS: Cross Application Time Sheet







LR is a standard message class available within your SAP system (depending on your versionand release level). Below is a list of all the messages available for within this class and a link to any long text associated with each message. These messages are very simple to use and can be implemented into your ABAP code using the MESSAGE statement and the following syntax.

MESSAGE I001(LR).

Note the value "I" represents an information messsage but can be replaced with E for error, W for warning, S for Status/Success, A for Abend/Termination and X for exit which does not display a message and causes a runtime error. Click here for more information about SAP Messages

Message class details can be viewed directly within your SAP system by entering the object name LR into the relevant SAP transaction such as SE91 or SE80.


001 Variant & does not exist
002 The transaction is locked by user &
003 Week & is incorrect




004 The date & used to determine the week is incorrect
005 The week & entered to determine the day is incorrect
006 Internal date & is incorrect
007 Error when inserting record & & &
008 Error when changing record & & &
009 Error when deleting record & & &
010 Select the personnel numbers for the time sheet
011 You are not authorized to display time recording data
012 Not authorized to maintain data for personnel number &2 using profile &1
013 Not authorized to display data for personnel number &2 using profile &1
014 Data has not been changed since it was last saved
015 Select the lines you want to delete
016 Your data has been saved
017 Select the column you want to sort by (again)
018 Internal program error in 'ASSIGN'
019 Select the line above which you want to insert an entry
020 Error when accessing the SAP repository
021 Error when accessing an internal table
022 Personnel number & does not exist
023 Select the lines you want to copy
024 &1 of &2 times were not released as they are in the future
026 Confirmations pool & does not exist
027 Time recording not intended for personnel no. &
028 Error when importing time data
029 Select one or more completed lines in the data entry section
030 Internal error occurred
031 Position the cursor on the section you want to process
032 Position the cursor on the line you want to split and on the day
033 Personnel number & does not exist on &




034 No authorization for personnel number & using profile & on &
035 Personnel numbers not selected due to lack of authorization
036 Error when writing to interface table for &
037 No approval procedure required. Check data entry profile.
038 Enter a valid personnel number
039 Select the column you want to sort by
040 Selection by work center assignment allowed for one personnel no. only
041 Select a line, column, or single cell
042 Some of the data was set to zero but could not be deleted
043 No time data administrator &1 in group &2
044 You cannot scroll any further
045 Organizational object & of type & not found on &
046 You cannot change the data entry period
047 The unit "hour" could not be determined
048 Error when determining next document number
049 The number set will soon be used up
050 You cannot save the data without workflow processing
051 More than 24 hours entered for personnel number &1 on &2
052 Week & not allowed
053 & lines containing the term &
054 Select at least one personnel number
055 Order & does not exist. Check your entry.
056 Operation & not in order &
057 Suboperation & to operation & not in order &
058 Infotype record created using the Time Sheet (CATS)
059 Enter a search term
060 Document number & does not exist
061 Personnel area/subarea &/& does not exist
062 Reference data record & & & does not exist
063 Work center &1 in plant &2 does not exist
065 Personnel number & cannot be unlocked
066 Enter a plant for the work center
067 Only object type O is allowed
068 Specify a controlling area
069 Screen & not supported
070 Incorrect online mode: Only A, E, and space are permitted
071 You cannot split totals lines or target lines
072 No data transferred to interface
073 Choose a line from the list
074 Save your entries
075 Assign plant in HR master record
076 Function not possible on field selected
077 Changes have been saved and written to the interface tables
078 Rejection reason cannot be displayed
079 Enter relevant working time attributes
080 Object & does not exist
081 The attendance/absence type &/& does not exist on &
082 No authorization for infotype &
083 No infotype 0007 record (Planned Working Time) on &






084 &
085 Error when saving data to table CATSDB
086 Error when saving data to the CO interface table
087 Error when saving data to the HR interface table
088 Error when saving data to the MM interface table
089 Error when saving data to the PM interface table
090 Error when saving data to the PS interface table
091 Document number & is invalid
092 No follow-on document for CATS document &
093 Personnel number & locked by user &
094 All selected personnel numbers are locked
095 You are not authorized to enter attendance/absence & for personnel no. &
096 No predecessors found
097 Data has already been entered for the current period
098 No data for previous period
099 No follow-on document can be displayed for the selected line
100 Enter purchase order number and item number
101 Purchase order item & & does not exist
102 Account assignment for purchase order item & & copied
103 Enter an account assignment
104 Plant & from CATS does not match plant & for purchase order item
105 Service & does not exist
106 You have entered a purchase order item which is not a service item
107 Unit of measure & does not correspond to base unit of measure &
108 & is a network. Enter in "Network" field.
109 & is not a network. Enter in "Order" field
110 No read authorization for personnel number &
111 Personnel number & not available for approval
112 Incorrect approval mode for personnel number &
113 No authorization to approve personnel number &
114 No authorization to approve attendances/absences for personnel no. &
115 Attendance/absence type & not found
116 No index for selection conditions
117 No data matches the specified selection criteria
118 No HR document
119 Enter the order or network for the operation
120 Enter the operation for the suboperation/element
121 Cancelation: no confirmation segment for CATS document & (-> long text)
123 Some hours were not distributed due to days off



124 & times were released
125 Enter a vendor number
126 Vendor &1 in infotype does not match vendor in purchase order &2
127 An error has occurred
128 Enter a combination of task type, task level, and task component
131 Personnel number & does not exist
132 No read authorization for personnel no. &
133 Confirmations are not allowed for this status
134 Enter either the order or the network
135 Purchase order & does not exist
137 No postprocessing pool as error occurred with Save --> Message list
138 Enter a controlling area
139 Enter a sender cost center or an operation
140 Enter an activity type
143 No changes were made
144 Sort sequence is completed automatically
147 Enter a number of days
149 You have maintained your data. Choose "Save" to save the data.
150 DO NOT start in a productive system (see long text)
151 Enter a data entry profile and a personnel number
152 Enter a personnel number
153 Enter clock times using daily or weekly entry only
154 Select a message line
155 Select a distribution period within the data entry period
156 End date must come after start date
157 Enter a maximum of 24 hours
158 A record transferred on & does not have a personnel number
159 Transferred date & is incorrect
160 Personnel number & does not exist or you do not have authorization
161 Data entry profile &1 does not exist
162 Data record number & cannot be processed
163 Record assigned number & has been transferred several times
164 Record of & with & hours has not been posted to HR
165 Record of & with & hours already posted to HR
166 "Several personnel numbers" and "Workdays only" are mutually exclusive
167 "Several personnel numbers" and "Worklist" are mutually exclusive
168 Record transferred for & (day off)
169 Sender and receiver are the same
170 No documents found
171 Activity price not required for activity allocation
172 You cannot scroll. You have reached the first selected line.
173 You cannot scroll. You have reached the last selected line.
174 Record of &1 with &2 hours was not deleted in HR
175 Record of &1 with &2 hours was deleted in HR
176 Profile incompatible with transferred data
177 A transferred record does not specify a number of hours
178 Sender cost center & and receiver cost center & are the same
179 Enter a sender object
180 A currency could not be determined for personnel no. & on &
181 Position or work center & & does not exist on &
182 Different payment not allowed for infotype & (T582Z)
183 Premium number/indicator &/& does not exist on &
184 Maximum of 24 hours copied for each day
185 Error when editing long text
186 Enter the hours before you maintain the long text
187 No more texts can be created on &
188 Enter the plant for the work center
189 Enter the currency for the activity price
190 Pay scale type/area not available for personnel number & on &
191 Employee group/subgroup &/& does not exist
192 Pay scale group/level &/& does not exist on &
193 Pay scale type/area not found for personnel number & on key date &
194 No long text for selected line
195 Personnel number & not active on &
196 Transfer already active; try again later
197 New records cannot have a long text indicator
198 You cannot trigger a workflow for external data
199 Use a data entry profile for several personnel numbers
200 Data is approved immediately. Approval using workflow not required.
201 Time collision & - & with & - &
202 Time collision & - & with previous day & - &
203 Record of & with & hours could not be posted
204 Record of & with & hours could not be deleted
205 Number of hours recorded & less than target hours &
206 Number of hours recorded & exceeds target hours &
207 Collision with full-day HR record
208 & - & collision with HR record < one day
209 Select a line with an order reference
210 Select a line in the data entry section
211 Select one line only
212 You have entered more than 24 hours per day
213 Personnel number: & Date: &
214 Order/network & entered without an operation (see long text)
215 Enter a distribution function
216 The number of hours released & exceeds the target hours &
217 The number of hours released & is less than the target hours &
218 The system cannot display possible entries
219 Only the data types 'CHAR' and 'NUMC' are allowed
220 Sender and receiver business processes are identical: &
221 Collision with full-day absence
222 Collision with full-day absence on previous day
223 & field is not in stucture CI_CATSDB
224 &1 field already used to define additional field &2
225 No long text available
226 Long text not available in logon language: Displayed in &
227 Collision between full-day CATS record and HR record < one day
228 Enter a document number
229 Select one personnel number only
230 No errors were found
231 No entry in check log
232 Sender cost center & copied from work center &
233 "Immediate transfer to HR" and "Approval required" are mutually exclusive
234 Capacity category and split number must be entered together
235 Split & not found for capacity category &
236 Quantity unit & incompatible with quantity unit &
237 Enter an item number
238 A new line can only be inserted above an existing line
239 Error occurred during conversion
240 No suitable entry found
241 Position your cursor on a column in the data entry section
242 Vendor & does not exist
243 Select either "Final confirmation" or "Partial confirmation"
244 Enter a work center and a plant
245 Attendance/absence type and wage type not permitted together
246 Enter an attendance/absence type or a wage type
247 The network or order & does not exist
248 Control key of operation & & does not permit confirmation
249 Record cannot be saved because no. of hours = 0
250 Interface table CATSMM cannot be locked
251 You cannot reset the lock for interface table CATSMM
252 Work center &1 not permitted for receiver object
253 Workflow recipient could not be determined
254 No automatic recipient determination for recipients entered
255 Some data was not deleted because it has already been approved
256 Data record number &1 can no longer be changed
257 Record &1 has the wrong cost accounting variant
258 Enter an attendance/absence type
259 Record with external document number &1 does not exist
260 No counter has been entered
261 Enter one sender object only
262 More than one recipient type in SAP enhancement
263 Sender business process not permitted for confirmations
264 Unit of measure &1 cannot be converted to unit &2 of business process
265 Unit not permitted
266 Currency not permitted for activity allocation or statistical key figure
267 Currency not permitted with confirmation
268 Currency not permitted with activity allocation
269 Currency not permitted with attendance or absence
270 Unit & not permitted with an activity allocation
271 Unit & not permitted with a confirmation
272 Unit & not permitted with an attendance or absence
273 Service entry with & hours cannot be changed
274 The template was saved successfully
275 Error when saving the template
276 The template was successfully reset
277 Error when deleting the template
278 Unable to set data entry profile "&" as default setting
279 Profile "&" was set as the default
280 There is no template that can be reset
281 The standard template was overwritten
282 Unable to delete the standard template
283 Unable to overwrite the standard template
284 Line contains no profitability segment as account assignment
285 Error when determining the fiscal year variant
286 Error when determining the fiscal year
287 Error when reading the profitability segment
288 Combination of stat. key figure and profitability segment not allowed
289 Do not enter a profitability segment
290 Line does not contain a controlling area
291 The previous standard template was not overwritten
292 The activity/operation & you entered does not exist
293 Records with profitability segment are not copied from the worklist
294 Display records cannot be copied
295 Time format is incorrect; check the start time and end time
296 Records relevant to cProjects are not copied from the worklist
297 Field &1 does not exist in the structure CI_PRS_CPILS_1
298 Field &1 is already used for service attribute &2
299 Only data types 'CHAR', 'DATS', and 'NUMC' are permitted
300 *Messages for data transfer to CO
301 No data for transfer
302 Error when changing document &V1& in CATSCO table
303 Error when transferring data to CO
304 All data successfully transferred to CO
305 Error when creating a handle for CATS
306 CATSCO table reorganized successfully
307 Transfer indicator reset for the selected records
308 Inconsistencies found between CATSCO and CO tables
309 Select only documents not yet transferred to CO
311 Time Sheet document does not exist
312 Error when converting the network number to CATS document &
313 Default data is correct
314 Choose another cell
315 Error when deleting a record from table &
316 Error on insertion to table CATSCOSUM
317 Enter an attendance or absence type or a wage type
318 Do not enter a sender or an activity type
319 Function not possible for display-only record
320 Do not enter a purchase order number/item or an activity number
321 Error when reading the employee's master cost center
322 Error when reading master activity type
323 Activity allocation master/sender cost center not required
324 Select a valid work center
325 No data found
326 Function not possible for display-only record
327 The customer enhancements cannot be assigned to line &1
328 Statistical key figure & not found
329 Unit of measure & does not exist
330 Enter a valid unit of measure
331 Enter only & decimal places
332 Do not enter an activity type when entering statistical key figures
333 Use total values only when entering statistical key figures
334 Do not enter a sender cost center when entering statistical key figures
335 & on &
336 & on & from & to &
337 Business function PRS_ERP_CPILS_1 is inactive
345 No search can be executed for this field
350 Restriction parameters contain formatting errors
351 Data records have not been imported completely, reduce the selection
352 &1: Number of database record hits exceeds &2; number reduced to &3
353 Record has long text flag without corresponding long text
354 Record has long text but no long text flag
355 No CATS record exists for the long text in row &1
356 Long text (flag) is not allowed for a CATS record that is to be deleted
357 Error creating the long text
358 Error deleting the long text
359 Could not read long text for a record
360 The text format &1 is invalid
361 Could not copy long text when changing the record
362 Approval not possible: Data is being processed
363 Some of the data to be approved is being processed
364 An error occurred on starting the workflow
365 An error occurred on starting the workflow
366 An error occurred while deriving the FM area.
367 Error during budget period configuration
370 **************************EHP6 ESS CATS RENO*****************************
371 Enter a relevant public holiday absence type or attendance type
372 Select the HR-enabled CATS checkbox to use payroll period end date
401 Specify a data entry profile
402 Specify a lower limit and/or an upper limit
403 Select "Too many" or "Too few"
404 Error when determining target hours for personnel no. &
405 A mail recipient could not be determined for personnel no. &
406 Error when sending mail to &1 for personnel no. &2
407 Processing not possible: Network or order has already been deleted
666 System error: & & & &
667 & & & &
670 Line total is too large;it will be displayed as 0
671 An error occured while determining the business partner.
672 An error occured while deterimining the cProject receiver system.
673 ALE distribution scenario for cProject contains errors.
674 Error while reading metadata for the cProject detail fields.
675 Unit &1 is not permitted for reporting to the cProject.
676 Customizing error: No "seconds" unit available.
677 cProject &1 &2 is invalid.
678 Local logical system not defined
679 Error while transferring detailed information into cProject.
680 Select a line with a cProject reference.
681 &1 is before &2
682 The percent complete cannot exceed 100%
700 ++++++++++++++Customizing messages+++++++++++++++++++++++++++++++++++++++
701 Enter a task ID
702 Only standard tasks (TS) or tasks (T) are allowed
703 Enter a valid period
704 Select via pers. list to enter data for several personnel numbers
705 No default for CO data for cost allocation to receiver object
706 Error on insertion to table TFAWC
707 Choose an attendance/absence or a wage type under "Default values"
708 Personal templates not compatible with profile for multiple persons
709 For selection using pers. list the initial screen is required
710 Task ID is not permitted for automatic selection of recipient
711 Error inserting into table &1
750 ***--- CE CATS ---***
751 Person ID & does not exist. Check your entries
752 Enter Person ID
753 Personnel number & does not exist. Check your entries
800 *+++++++++++++ Messages for CATS ITS +++++++++++++++++++++++++++++++++++*
801 Data entry profile &1 does not exist
802 No personnel no. has been maintained in the system for your user
803 Your worklist is empty. Enter the account assignments manually.
804 Search unsuccessful. Enter your search criteria again.
805 This is your time sheet for the current data entry period
806 The time sheet was saved successfully &
807 The time sheet contains errors. You cannot save.
808 Your time sheet is consistent and can be saved
809 Position the cursor on the field for which you want to search
810 The search found more than & hits. Only the first & are displayed.
811 Your entry "&1" in row &2 on &3 is invalid and has been deleted
850 *+++++++++++++ CATS Archiving ++++++++++++++++++++++++++++++++++++++++++*
851 No data exists for counter &
852 No data exists for document number &
853 No data exists for personnel number &
854 No data exists for &
855 Enter a valid value
860 No data was selected
861 Canceled by user
863 Parameters of function module & are inconsistent
864 Template cannot be saved for multi-person data entry profiles.

Contribute (Add Comments)

Use the comments section below to add any links, information or screen shots that you feel are relevant to this message class or any of the messages within it. This could include issues you have found that cause the messages to appear incorrectly as well as any fixes you have found or relevant SAP OSS notes. This information can then be found quickly, simply by searching on the message class LR

.